Hewitt Docks, Lifts & Pontoon Legs - Accessories Catalog by Venatic Design

www.hewittrad.com

PARTS & ACCESSORIES

S U P E R I O R

C R A F T S M A N S H I P

S I N C E

1 9 7 1

Hewitt Accessories – tailor-made appearance and performance. Hewitt Manufacturing produces many different types of docks and lifts to satisfy individual needs, but that’s only the beginning. Hewitt accessories offer even greater flexibility with a wide range of equipment designed to simplify installation, automate operation, improve accessibility, enhance appearance, add functionality and provide extra protection for you and your watercraft. While the products shown in this catalog are specifically selected and made to complement Hewitt Lifts and Docks, many may be used in combination with other brands. Either way, you can be assured that when you choose Hewitt accessories, you are getting the same high-quality materials and workmanship that make Hewitt Lifts and Docks the most durable designs in the industry.

CONTENTS

DOCK ACCESSORIES

2 Benches, Umbrellas & Patio Chairs 4 Dock Cleats 6 Corner Bumpers 9 Post Caps & Covers 10 Dock Wheels 11 Torpedo Bumpers 12 Adjustable Bumpers 14 Rectangular & Edging Bumpers 18 Rub Rails 20 Brackets & Lights 22 Augers, Pipes, Tires & Bracing 24 Dock Wheels & Accessories 26 Sectional Dock Systems,

Hinges & Plates

28 Dock Ramps & Corner Triangles 30 Decking

31 ThruFlow™ Decking 32 Wave Armor Dock Accessories 39 Storage Boxes & Coolers 40 Ladders & Steps 44 Kayaks & Accessories 46 Dock Gates & Mat Rack 47 Float Tanks & Otter Accessories 48 Otter ATV Trailers & Accessories 49 Galvanized Dock Hardware 54 Piling Rings & Caps LIFT ACCESSORIES

Lift Bumpers, Full-Length Guides & Motor Stop

58 Centering Guides & Catwalk 60 Pontoon Conversions & Accessories 62 Bunks & Bunk Treads

64 Lift Legs & Extensions 65 Tie-Downs & Augers 66 LIft Wheels 67 Lift Jack & Transportation Bar 68 Roll-A-Rail Accessories 69 LIft Accessories 70 SLX Wave Port Attachments &

Accessories

72 Apex Wave Port Attachments & Accessories 73 Genesis & Extreme Wave Port Attachments

& Accessories

74 Winches & Wheels 75 Solar Panels & Battery Stand 76 Boat Lift Boss Hoists 77 Integrated Hoist 78 Heavy-Duty Electric Hoists 79 Canopy Accessories & Camper Stabilizers 80 Hewitt Apparel

All items must be ordered from your local Hewitt dealer. To find a dealer near you, Call: 800-544-2067 Visit: hewittrad.com All items in this publication are subject to change without notice. 3

Benches, Umbrellas and Patio Chairs

Bench Seat Options Available in three colors.

White

Beige

Woodgrain

Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

Free Standing Bench R

F U

Mounts to any flat surface. All aluminum brackets. Shown with aluminum planks. (Umbrella not included.) Aluminum 4’ panel (2” x 6”) bench kit & bolts (White) part# D1BFA4A 4’ panel (2” x 6”) bench kit & bolts part# D1BFA4AB (Beige) 4’ panel (2” x 6”) bench kit & bolts part# D1BFA4W (Woodgrain)

39”

8’ panel (2” x 6”) bench kit & bolts (White) part# D1BFA8A 8’ panel (2” x 6”) bench kit & bolts (Beige) part# D1BFA8AB 8’ panel (2” x 6”) bench kit & bolts (Woodgrain) part# D1BFA8W

30” Table

21”

Bench Bracket Kit (w/bolts, no wood) part# D1BFA

part# DPTABLER R

14”

18”

Care-free, durable and classic are just a few words that come to mind when you see this large low-maintenance all aluminum powder-coated mesh table. Includes hole for an optional umbrella and a bracket for mounting table to dock.

part# DPTABLEC C

Bench Umbrella

Aluminum construction, mounts to back of bench. Used to shade the sitting area of your bench, 32” of adjustment.

Vinyl Umbrella 4’ 8’

part# D1U4 color part# D1U8 color

part# DTABLEU

Large 5” x 13-1/2” molded armrest has deep cup holder that is rotational molded, and can hold up to a 3-1/2” diameter cup.

Defender Umbrella 4’ 8’

part# DPTABLEW W

Bench Armrest with Cup Holder

part# D1US4 color part# D1US8 color

Table Only 5”

part# D1BAR 13-1/2”

Defender Colors

19 oz marine fabric made from combining fabric with a textured marine grade vinyl. Waterproof and has a fluorocarbon finish for UV, water, mildew and fade resistance. Choose from 11 popular colors. Other colors available through special order.

Standard Vinyl Canopy Colors

Our 16 oz nylon with 9 x 9 reinforced vinyl canopies are durable, waterproof and UV resistant to prevent premature fading. Randomly textured finish in 7 popular colors.

DEFENDER MARINE

Defender

BLACK TRIM

Chair features an powder coated all-aluminum, adjustable swivel rocker mechanism that offers an exciting way to experience comfort and relaxation. Chair is wrapped with two layers of fabric making this chair extremely durable and very comfortable. Includes bracket for mounting chair to dock.

part# DPCHAIRC C

Fabric

Dubonnet Tweed

F C W U

Patio Chair

part# DPCHAIRR R

FABRIC

MARINE FABRIC

part# DPTABLE R

WHITE TRIM

Burgundy

Charcoal Tweed BLACK TRIM

BLACK TRIM

Midnight

Forest BLACK TRIM

BLACK TRIM

Dubonnet Tweed

Cadet

Toast BROWN TRIM

WHITE TRIM

Pacific

part# DPCHAIRW W part# DCHAIRU

Hemlock Tweed

Navy WHITE TRIM

Chair Only - part# DPCHAIR R

F C W U

Holes are 4” on center

BLACK TRIM

4”

Vinyl Black BLACK TRIM

Gray BLACK TRIM

Beige BROWN TRIM

Blue WHITE TRIM

Green BLACK TRIM

Yellow WHITE TRIM

White

Universal Bracket part# DPBRKTU

WHITE TRIM

Dock Bracket part# DPBRKTR

Wave Dock Bracket part# DPBRKTW

Classic Bracket part# DPBRKTC

R oll-A-Dock

V ers-A-Dock

S ectional

Offset Bench

C lassic dock

W ave Dock

Universal Dock and Patio Bench

14”

All aluminum construction, Hewitt Benches are unique when mounted to the dock. The bench is over the water, not on the deck, leaving that important deck space.

F loating Dock

21”

* Armrest/Cup Holders are sold seperately, see page 2. 18”

Maintenance-free, weatherproof dock/ outdoor benches can be utilized in virtually any outdoor space within both residential and commercial locations such as: home, cabin, parks, golf courses, marinas, schools and more. Pebble Beach color. 4’ Bench: 52”Wx37”Hx27”D. 66lbs. part# DF300014

4’ WIDE DOCK

6’ WIDE DOCK

CLASSIC DOCK

ULTRA DOCK

4’ Aluminum Bench White Kit & bolts Beige Woodgrain

part# D1BA4A part# D1BA4AB part# D1BA4W

part# D6BA4A part# D6BA4AB part# D6BA4W

part# D1BCA4A part# D1BCA4AB part# D1BCA4W

part# D1BUA4A part# D1BUA4AB part# D1BUA4AW

8’ Aluminum Bench White Kit & bolts Beige Woodgrain

part# D1BA8A part# D1BA8AB part# D1BA8W

part# D6BA8A part# D6BA8AB part# D6BA8W

part# D1BCA8A part# D1BCA8AB part# D1BCA8W

part# D1BUA8A part# D1BUA8AB part# D1BUA8AW

Bench Bracket With bolts, no wood

part# D1BA

part# D6BA

Bench Bracket only

N/A

N/A part# DCBB

N/A

5’ Bench: 64”Wx37”Hx27”D. 81lbs. part# DF301092 6’ Bench: 76”Wx37”Hx27”D. 96lbs. part# DF300016

U ltra Dock

F W U

37”

Anchoring Point Recessed Sides Side support seat, not just a bolt.

27”

• Rotational molded construction • High-impact polyethylene • Weatherproof and UV Resistant • Molded-in beverage holders • Molded-in anchoring compartments

Universal Storage Box

Rotationally molded with high-impact polyethylene and maximum UV protection. Pebble Beach Textured Finish. (Fits 5’ Bench only) part# DF301093 R

F W U

part# DUBB

17-3/4”

51-1/2”

13”

PIER BUMPER Table Accessories

Pro Guard Bumper

Kayak Rack

Dock Cleats

PIER BUMPER Table Accessories

Pro Guard Bumper

Kayak Rack

PIER BUMPER

Pier Bumper

Pro Guard Bumper

Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

10” Weel

Corner Wheel

STRAIGHT BUMPER

PIER BUMPER

Pro Guard Bumper

PIER BUMPER

Corner Wheel 9-15/16” Corner Wheel

Pro Guard Bumper

F U

Pier Bumper

Black White

STRAIGHT BUMPER

S-Cleat

6-1/2”Corner Wheel Corner Wheel Corner Wheel Corner Wheel

Bolt Screw

F U

Hand winch Fold Cleat

Secure your boat quickly and easily with the 10” cast-aluminum “S” Compact Cleat dock cleat. Made of corrosion-resistant aluminum for enhanced Support Pipes winch durability. Oversized horns make it easy to loop large ropes. “S” Compact cleatHandCleat hasPipes recessed mounting holes to reduce the chance of line snag Cleat and fray. Support Compact

Pro-Guard Storm

Compact Cleat

Round Edge Guards

Support Pipes (Requires two bolts, nuts and washers per cleat)

part# D1CN8 8” Volume Pack 50 pcs (Requires two bolts, nuts and washers per cleat.)

Braking Post Winchwinch Lower Lip Corner Bumper

dock cleat

part# NB516212C Used with deck thickness up to 1/2”. Lower Lip Corner Bumper 5/16” x 3-1/2” SS Carriage Bolt part# NB516312C Universal Bumper Postwith Ratchetdeck thickness up to 1-1/2”. Used 5/16” Brass Nut part# NN516B Small part# NW516FL Universal Bumper 5/16” SS Flat Washer Universal Bumper

Braking Winch dock cleat

Heavy12” Duty Cleat

Heavy 15” Duty Cleat

dock cleat 6”

8” dock cleat seat

dock cleat seat

mooring cleat Corner Bumper

Small Post Ratchet

Universal Bumper

storage boxes Cushion Bumper

Dock Cleat Seat Hardware

Post Ratchet

R F Decking Backer Cruizer

F U

Reinforcement backer plate Provides a simple yet secure way to mount your cleats used under the mooring deck of cleatdock to to your dock. Used with deck thickness up to 2”. help secure dock ladders and (Mounts 4 cleats) dock cleat seat cleats. Fits up to 1-1/4” tube. part# D1CSH Volume Pack 20 pcs

storage boxes

Backer part# D1DDB

Cushion Bumper

Cruizer

Impulse mooring cleat

Impulse Piling Bumper

Piling Bumper

1-11/32”

Harbor Straight Bumper

Paddle

12”

storage boxes Cushion Bumper

Small

Classic Dock Backer Plate

Paddle Universal Bumper Truss Bumper

mooring c

Under dock support plate for increased stability mounting accessories to dock.

Paddle

Corner Bumper

dock cleat seat

Post Ratchet

Hea

5/16”Bumper x 2-1/2” SS Carriage Bolt Lower Lip Corner

Heavy10” Duty Cleat

dock cleat

Cooler Post winch (Requires two bolts, nuts and 4 washers per cleat.) 7/16” x 3” part# NB7163G Used with deck thickness up to 1/2” 7/16” x 4” part# NB7164G Used withdock deckcleat thickness up to 1-1/2” 7/16 Nut part# NN716S ½” SS flat washer part# NW12FL dock cleat seat

Compact Cleat

Fold Cleat

Cooler

Braking Winch Post winch

1/4” x 2-1/2” SS Carriage Bolt part# Cooler NB14212C used with deck thickness up to 1-1/4” 1/4” x 3-1/2” SS Carriage Bolt Cooler part# NB14312C used with deck thickness up to 2-1/4” 1/4” Coated Nut part# NN14S winch ¼” SS FlatPost Washer part# NW14FL

Pro-Guard Storm

10” (Volume Pack 40 pcs) part# D1CS10 12” (Volume Pack 40 pcs) part# D1CS12 Cooler part# D1CS15 15” (Volume Pack 20 pcs)

Round Edge Guards

Pro-Guard Storm

Round Edge Guards Corner Wheel Support Pipes 6” Volume Pack 50 pcs part# D1CN6

Corner Wheel

Bolt Screw

Pro-Guard Storm

Nylon Dock Cleat

Cleats are injection molded in black nylon for long-lasting strength and durability.

Bolt Screw

part# D1CSW

10” Weel 10” Weel

6” Launch

Launch

Rugged, folding tie-down. Bolts to any flat surface. Tensile Strength: 27,000 PSI Volume Pack 50 pcs Rated for: 1/2” Rope Pier Bumper Pier Bumper STRAIGHT Mounting Hardware: 1/4” Lag Screw 1/4” Hex Head (not included) BUMPER STRAIGHT part# BUMPER D1CSB

Bolt Screw Bolt Screw

Table Accessories

Dock Cleat Seat

Pier Bumper

STRAIGHT BUMPER

Harbor Straight Bumper Piling Bumper

storage boxes part# DCBP5 Corner Bumper Two recommended for freestanding bench and ladder (Not tip-over ladder hinge). Truss Bumper

part# DCBP10 Recommended for cleats.

Cushion Bumper

Pro Guard Bumper

Table Accessories

Corner Wheel

Kayak Rack

PIER BUMPER

10” Weel

Pro Guard Bumper

PIER BUMPER

Table Accessories

Corner Wheel

Pro Guard Bumper

Corner Wheel

Kayak Rack

10” Weel 10” Weel

Pier Bumper STRAIGHT BUMPER

Pier BumperR

oll-A-Dock

V ers-A-Dock

Pier Bumper Pier Bumper STRAIGHT BUMPER

STRAIGHT BUMPER

S ectional

C lassic dock

F loating Dock

Round Edge Guards Launch

Launch Wheel Corner

Bolt Screw Launch

Pro-Guard Storm

Corner Wheel

Bolt Screw

W aveBolt Dock Screw

Cor

U ltra Dock Corner Wh

Corner Wheel

Bolt Screw

Corner Wheel

Pro-Guard Storm

Fold Cleat

6” Aluminum Cleat

F U

Support Pipes R Galvanized Cleats

Volume Pack part# D1CA6C PIER BUMPER 100 pcs part# D1CA6W part# D1CA6B

Pro Guard Bumper Hand winch

Braking Winch

F U

Pro-Guard Storm

part# D1CMW part# D1CMB part# D1CMC

5/16” x 2-1/2” SS Hex Bolt part# NB516212G

Post Ratchet

Volume Pack 200 pcs

Impulse

Post Ratchet

Corner Wheel

Cooler

dock cleat seat

Impulse

dock cleat

Cleat Hardware part# D1CSH Volume Pack 20 pcs Kit includes hardware for mounting eight mini cleats. Used with deck thickness up to 2”.

Impulse

part# D1CG12 12” Volume Pack 40 pcs (Requires two bolts, nuts, washers per cleat.) dock cleat seat

7/16” x 3” SS Hex Bolt part# NB7163G Piling Bumper Used with deck thickness up to 1/2”. 7/16” x 4” SS Hex Bolt part# NB7164G mooring cleat Used with deck thickness up to 1-1/2”. 7/16” part# NN716S dock cleat seat Brass Nut ½” SS Flat Washer part# NW12FL Piling Bumper

dock cleat seat

Harbor Straight Bumper

mooring cleat

Paddle

storage boxes

8” Aluminum Cleat

F U

Cushion Bumper

Harbor Straight Bumper Piling Bumpe

For larger boats on larger bodies of water.

3” Cruizer

Small Unive

Cushion Bumper

Lower Lip Corner Bumper

Cruizer

Heavy Duty 12” Cleat dock cleat seat

3/8” x 3” SS Hex Bolt part# NB383G Used with deck thickness up to 3/4”. 3/8” x 4” SS Hex Bolt part# NB384G Used with deck thickness up to 1-3/4”. 3/8” Brass Nut part# NN38S 3/8” SS Flat Washer part#storage NW38FL boxes

Small Universal Bumper

Post Ratchet

Heavy Duty 10” Cleat

Small Universal Bu

dock cleat

Fold Cleat Cruizer

Low

8” Cleat Heavy Duty

dock cleat

Universal Bumper Compact Cleat

Lower Lip

dock cleat

10” Weel Used withPost deck Cooler Corner Wheel winch thickness up to 3/4”.

Heavy Duty Cleat

3” mini cleat’s compact design is excellent for tieing up canoes, chairs to the docks and for mooring small fishing boats.

White upport PipesBlack Cast

8” Volume Pack 100 pcs part# D1CG8 (Requires two bolts, nuts and washers per cleat.) Cooler

Corner Wheel

Bolt Screw

Fold Cleat

Cooler

part# D1CG10 10” Volume Pack 60 pcs Lower Lip Corner Bumper (Requires two bolts, nuts and washers per Edge cleat.) Round Guards

STRAIGHT BUMPER

dock cleat

F U

5/16” x 3-1/2” SS Hex Bolt part# NB516312G Used with deck thickness up to 1-3/4”. 5/16” Brass Nut part# NN516B Braking Winch Post winch 5/16” SS Flat Washer part# NW516FL

(Requires two bolts, nuts and washers per cleat.) 3/8” x 1-1/2” SS Hex Bolt Compact Cleat part# NB38112G Hand winch Used with deck thickness up to 3/4”. 3/8” x 2” FT SS Hex Bolt part# NB382FT Used with deck thickness up to 1-1/4”. 6” Pier Bumper 3/8”Brass Nut part# NN38S Hand winch Braking Winch 3/8”SS Flat Washer part# NW38FL Post winch

Support Pipes galvanized cleat in three sizes (Bolts not included). Compact Cleat Heavy-duty

Support Pipes

Fold Cleat

Mini Cleat

Compact Cleat

Heavy-duty commercial cleat for use on Pro-Guard Storm inland waters with boats up to 18’. Cast White Black

Compact Cleat

Paddle

Corner Bumper mooring cleat (Requires two bolts, nuts and washers per cleat.) 3/8” x 1-1/2” SS Hex Bolt part# NB38112G Used with deck thickness up to 3/4”. Universal Bumper 3/8” x 2” FT SS Hex Bolt part# NB382FT part# D1CA8W Volume Pack 50 pcs White storage boxes Used with deck thickness up to 1-1/4”. part# D1CA8B Volume Pack 50 pcs Black Cushion Bumper HarborNN38S Straight Bumper Small 3/8”Brass Nut part# part# D1CA8C Volume Pack 60 pcs Cast Universal Bumper 3/8”SS Flat Washer part# NW38FL

Heavy Duty Cleat

Cast, White or Black powder-coated.

8”

Corner Bumper

PIER BUMPER Table Accessories

Pro Guard Bumper

Corner Bumpers

10” Weel

Corner Wheel

Kayak Rack

PIER BUMPER

essories

Pro Guard Bumper

10” Weel

Corner Wheel

Pier Bumper STRAIGHT

Indicates this product STRAIGHTis shippable via UPS from your local dealer or visit us online at www.hewittrad.com. BUMPER

Corner Wheel

Bolt Screw

BUMPER It is recommended that the rub rail of your boat comes in contact with the bumper rather thanCorner the bumper Corner Wheel Wheel Screw to come in contact with the sides of your boat as this canBoltresult in serious damage to the sides of your boat.

Pier Bumper Round Edge Guards

Corner Wheel

Pro-Guard Storm Launch

Pro-Guard Storm

Fold Cleat

6” Universal Corner Bumper

Fold Cleat

Support Pipes

Compact Cleat

Marine-grade PVC with one-inch solid outside flange for fastening to dock.

Colors: White, Black, Blue, Light Gray, Darkdock Gray cleat

Cooler

Post winch

dock cleat

Heavy Duty Cleat

Hand winch

Universal Bumper

Post winch

Small

Universal Bumper 1-1/4”

Braking Winch

Volume Pack 32 pcs

Lower Lip Corner Bumper

Cooler

Lower Lip Corner Bumper

Colors: White, Black, Light Gray, Dark Gray, Blue part# D1BUC6WE part# D1BUC6BK part# D1BUC6BE part# D1BUC6GYL part# D1BUC6GYD

Compact Cleat

Marine-grade PVC with one-inch solid outside flange for fastening to dock.

Support Pipes

White Black Blue Light Gray Dark Gray

10” Universal Corner Bumper

part# D1BUC10WE part# D1BUC10BK part# D1BUC10BE part# D1BUC10GYL part# D1BUC10GYD part# D1BUC10TN

White Black Blue Light Gray Dark Gray Tan

Universal Bu

Small

1”Universal Bumper

Corner Bumper

dock cleat seat

(5 fasteners recommended per bumper, see page 8.)

6”

Piling Bumper

3-1/2”

2-3/4”

(7 fasteners recommended per bumper, see page 8.)

Post Ratchet

dock cleat seat

Volume Pack 24 pcs

3-7/8”

3-1/8”

Heavy Duty Cleat

9-1/4

” Piling Bumper

Truss Bumper

mooring cleat

Truss Bu

mooring cleat

PIER BUMPER storage boxes

10” Classic Corner Bumper

Cushion Bumper

Marine-grade PVC with one-inch solid outside flange for fastening to dock.

10” Small Lip Corner Bumper

Harbor Straight Bumper

Cruizer

Impulse

Kayak Rack

PIER BUMPER

part# D1BUCWE Table Accessories part# D1BUCBK part# D1BUCBE part# D1BUCTN part# D1BUCGYL part# D1BUCGYD part# D1BUCKI

(7 fasteners recommended per bumper, see page 8.)

STRAIGHT BUMPER

10”

2-3/4”

Harbor Straight Bumper

Colors: White, Black, Blue, Tan, Light Gray, Dark Gray

White Black Blue Tan Light Gray Pier Bumper Dark Gray Launch

1”

Volume Pack 24 pcs

Cushion Bumper

Marine-grade PVC with small 3/16” flange for fastening to dock.

Paddle

Colors: White, Black, Blue, Tan, Light Gray, Dark Gray, Khaki White Black Kayak Rack Blue Tan Light Gray Dark Gray Khaki

Table Accessories

storage boxes

Pro Guard Bumper

part# D1BUCSLWE Corner Wheel part# D1BUCSLBK part# D1BUCSLBE part# D1BUCSLTN part# D1BUCSLGYL part# D1BUCSLGYD

Volume Pack 24 pcs 3-3/4”

Bolt Screw

Pier B STRAIGHT BUMPER

10” Weel

Pro

3/16”

Round Edge Guards Corner Wheel

(7 fasteners recommended per bumper, see page 8.)

Corner Wheel

10” Pipes Support

2-3/4”

3-3/4”

Pro-Guard Storm Launch

Cooler

Launch

Fold Cleat Compact Cleat

per

Support Pipes

Pro Guard Bumper Corner Wheel

Kayak Rack

Corner Wheel

Bolt Screw

Corner Wheel

Bumper Colors

Pro Guard Bumper Corner Wheel

Hand winch

10” Weel

Lower Lip Corner Bumper

Round Edge Guards

Cooler

White

Black

Blue

Green

Tan

dock cleat

Light Gray Dark Gray Chocolate

Pier Bumper

PIER BUMPER 10” Weel

Heavy Duty Cleat

STRAIGHT BUMPER Bolt Screw

Post winch

ard Storm

Corner Wheel

Teal

Khaki

Red

Round Edge Guards Universal Bumper

Corner Wheel

Small Universal Bumper Pro-Guard Storm

Pier Bumper

Lower Lip Corner Bumper STRAIGHT

Launch Braking Winch

Fold Cleat Volume Pack 24 pcs Bolt Screw

BUMPER

Wraps around 4.5” docks. One-inch solid outside Compact Cleat flange for fastening to dock. Marine-grade PVC. Colors: White, Black, Blue, Light Gray White Black Blue SupportLight Pipes Gray

Cooler

Piling Bumper

9-1/2” Compact Cleat Hand winch

Heavy Duty Cleat Braking Winch

Paddle

Universal Bumper

dock cleat seat

12” Soft Harbor Corner Bumper dock cleat seat

Designed for larger docks and watercraft. Flat ends can be mounted together with harbor straight bumper. Marine-grade PVC. Impulse

Matching 36” bumper on page 14.

Paddle

Straight mooring cleat Harbor Bumper

part# D1BHCWE part# D1BHCBK part# D1BHCGYL

Piling Bumper

storage boxes

Volume Pack 12 pcs (8 fasteners recommended per bumper, see page 8.) mooring cleat

11” White part# D1BUTC11WE Black part# D1BUTC11BK * Corner Bumper mooring cleat Blue part# D1BUTC11BE TanCorner Bumper part# D1BUTC11TN Green part# D1BUTC11GN storage boxes Light Gray part# D1BUTC11GYL* Cushion Bumper Rack Dark Gray part#Kayak D1BUTC11GYD Chocolate part# D1BUTC11CE* Khaki part# D1BUTC11KI* Truss Bumper * New style like 8” shown below

Small Universal Bumper

Piling Bumper

Cruizer

dock cleat

Cushion Bumper

Corner Bumper Harbor Straight Bumper

Truss Bumper

12”

5”

”

10”

8” White Black Blue Tan Green Light Gray Dark Gray Chocolate Khaki

part# D1BUTC8WE part# D1BUTC8BK part# D1BUTC8BE part# D1BUTC8TN part# Launch D1BUTC8GN part# D1BUTC8GYL part# D1BUTC8GYD part# D1BUTC8CE part# D1BUTC8KI

Truss Bumper

Heavy Duty Cleat

13” Fold Cleat White part# D1BUTC13WE* mooring cleat Black part# D1BUTC13BK* Post winch Blue part# D1BUTC13BE* Tan part# D1BUTC13TN* 4-1/2” 6” Lower Lip Corner Bumper storage boxes Green part# D1BUTC13GN LightCushion Gray Bumper part# D1BUTC13GYL*Harbor Straight Bumper dock D1BUTC13GYD cleat seat Dark Gray part# Heavy Duty Cleat Universal Bumper Chocolate part# D1BUTC13CE * New style like 8” shown below Universal Bumper Small Post Ratchet

Cushion Bumper

Volume Pack 20 pcs (4 fasteners recommended per bumper, see page 8.)

Lower 1” Lip Corner Bumper

dock cleat

White Black Light Gray

Colors: White, Black, Blue, Green, Tan, Light Gray, Dark Gray, Chocolate, Khaki

Lower Lip Corner Bumper

Cooler

Colors: White, Black, Light Gray

Designed to work with Compact truss Cleat and solid side docks with up to a 11.5” span. Marine-grade PVC.

Post Ratchet

dock cleat

Impulse

Corner Bumper Fold Cleat

Corner Wheel

Pro-Guard Storm

part# D1BLLCWE part# D1BLLCBK part# D1BLLCBE part# D1BLLCGYL

Cruizer

Truss Corner Bumper

dock cleat seat Round Edge Guards Corner Wheel

(7 fasteners recommended Support per Pipes bumper, see page 8.)

st winch

PIER BUMPER

Table Accessories

4”

Universal Bumper

Small Universal Bumper

13-1/2”

11-1/2”

Corner Bumper

Piling Bumper

Truss Bumper 3-1/4”

9-1/2”

PIER BUMPER

11-1/2”

Table Accessories Harbor Straight Bumper

STRAIGHT BUMPER

4-5/8”

6”

8”

Support Pipes

Harbor Straight Bumper Cooler

Pro Guard B

Corner Bumpers It is recommended that the rub rail of your boat comes in contact with the bumper rather than the bumper to come in contact with the sides of your boat as this can result in serious damage to the sides of your boat.

Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

24” Poly Harbor Cushion Corner

Corner Bumper

11-1/2”

Made of tough and durable polyethylene. White part# D1BPHCW Black part# D1BPHCB Volume Pack 12 pcs (Requires 4 bolts, 4 nuts and 8 washers per bumper)

6A Corner and 6B Side Bumper. Polythene bumper available in black only.

Pier Bumper

part# D1B6A part# D1B6B

19”

23-1/2” 24”

1” bolt length through bumper.

AIGHT MPER

3/8” x 3” SS Hex Bolt part# NB383G used with wall thickness up to 1”

Matching 48” bumper on page 17.

3/8” x 4” SS Hex Bolt part# NB384G used with wall thickness up to 2” 3/8” Brass Nut part# NN38S 3/8” SS Flat Washer part# NW38FL

Poly Bumper Backing Plate 3/8” x 2” Aluminum. Volume Pack 200 pcs part # D1BPHCP

10 10

10”

Straight Frame Bumper

Corner Bumper

8-1/2”

Bumper Screws - Wood

Bumper Screws

#10 Stainless steel 1-1/4” bumper screws for wood decking/docks. 50 qty bag

Use to securely fasten bumpers to your dock frame with a large .455” head.

Volume Pack 24 pcs

50 qty bag (self-tapping)

part# D1BUSCSS

F U

Bolt Screw

Volume Pack 24 pcs

.373”

.455”

part# D1BUSC

Lag Bolt Set

Pro-Guard Storm

Galvanized lag bolts for attaching harbor and frame bumpers to wood docks.

3/8” x 2” galvanized lag bolt 3/8” x 3” galvanized lag bolt 3/8” x 5” galvanized lag bolt 3/8” SS flat washer

part# NB382L part# NB383L part# NB385L part# NW38FL

Post Caps and Covers Bumper Colors

White

Black

Blue

Green

Tan

Light Gray Dark Gray Chocolate

Red

Round Rubber Pipe Cap

Pole Cover

Round marine-grade vinyl caps fit over the top of dock pipes.

The 36” pipe covers are designed to slide over 1-1/4”, 1-1/2” or 2” dock pipe to provide a uniform look to your dock. They can be trimmed to any size for custom applications. Material: Marine-grade PVC

Colors: Blue, Red, Black, White, Green, Tan, Light Gray, Teal, Khaki Volume Pack 200 pcs

Khaki

Teal

Installation: Trim the pipe covers to your desired length and slide them over your dock pipe. Slides easily over dock pipes. WITH FLAT TOP 1-1/4” Cap for 1-1/2” OD Pipe Blue part# D1RC114BE part# D1RC114RD Red part# D1RC114BK Black part# D1RC114WE White part# D1RC114GN Green part# D1RC114TN Tan part# D1RC114GYL Light Gray 1-1/2” Cap for 1-3/4” OD Pipe part# D1RC112BE Blue part# D1RC112RD Red part# D1RC112BK Black part# D1RC112WE White part# D1RC112GN Green part# D1RC112GYL Light Gray 2” Cap for 2-1/4” OD Pipe part# D1RC2BE Blue part# D1RC2RD Red part# D1RC2BK Black part# D1RC2WE White part# D1RC2GN Green part# D1RC2TN Tan part# D1RC2GYL Light Gray 2-11/16” Dock Post, 2-15/16” ID part# D1RC211/16 White

WITH ROUND TOP 1-1/4” Cap for 1-1/2” OD Pipe Blue part# D1RRC1-1/4BE part# D1RRC1-1/4BK Black part# D1RRC1-1/4WE White part# D1RRC1-1/4GN Green part# D1RRC1-1/4GYL Light Gray part# D1RRC1-1/4KI Khaki 1-1/2” Cap for 1-3/4” OD Pipe part# D1RRC1-1/2BE Blue part# D1RRC1-1/2RD Red part# D1RRC1-1/2BK Black part# D1RRC1-1/2WE White part# D1RRC1-1/2GN Green part# D1RRC1-1/2GYL Light Gray part# D1RRC1-1/2TL Teal part# D1RRC1-1/2KI Khaki 2” Cap for 2-1/4” OD Pipe part# D1RRC2-BE Blue part# D1RRC2-BK Black part# D1RRC2-WE White part# D1RRC2-GN Green part# D1RRC2-TN Tan part# D1RRC2-GYL Light Gray part# D1RRC2-TL Teal

Colors: White, Black, Blue, Green, Tan, Light Gray, Khaki Volume Pack 24 pcs

36”

Small Cover 2” ID for 1-1/4 and 1-1/2” Pipe White part# D1PG114WE part# D1PG114BK Black part# D1PG114BE Blue part# D1PG114GN Green part# D1PG114TN Tan part# D1PG114GYL Light Gray part# D1PG114KI Khaki Large Cover 2-3/4” ID for 2” Pipe part# D1PG2WE White part# D1PG2BK Black part# D1PG2BE Blue part# D1PG2GN Green part# D1PG2TN Tan part# D1PG2GYL Light Gray part# D1PG24KI Khaki

11 11

Dock Wheels Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

12” Wheel - Post Mount

10” & 14” Wheel - Corner Mount

These dock wheels are designed to gently roll your watercraft along the dock. They will fit over 1-1/4”, 1-1/2”, or 2” dock pipe with an optional locking collar.

These dock wheels are designed to gently roll your watercraft along the dock. Attaches to corners of dock. Material: Marine-grade PVC

Material: Marine-grade PVC Installation: Slide one nylon bushing over post and tighten set screws. Slide the dock wheel over the post, then slide second nylon bushing over post and tighten set screws. Color: White

Volume Pack 12 pcs

Pro Guard BumperFor 1-1/4” and 1-1/2” Pipe Wheel Only Corner Wheel

part# DF300021 10” Weel part# DF301032

For 2” Pipe Wheel Only

PIER BUMPER

Pro Guard Bumper

Locking Collar Corner Wheel Nylon bushing with nylon set screws for easy height adjustment and locking wheel from being raised.

mper

part# 10” Weel D1BDW12COLLAR

Round Edge Guards

Pier Bumper

Corner Wheel

Bolt Screw

Corner 12”Wheel Round Edge Guards

Bolt Screw

Corner Wheel 1-1/4” and 1-1/2” have 2” opening 2” has 2-1/2” opening

Corner Wheel

Guard Storm Pro-Guard Storm

Cleat Fold Fold Cleat Compact Cleat

6-1/2”

Compact Cleat

12 12

10” 14”

Lower Lip Corner Bumper

White part# D1CR10WE part# D1CR14WE

Black part# D1CR10BK part# D1CR14BK

Torpedo Bumpers Bumper Colors

Torpedo Post Bumper

White

Black

Blue

Green

Tan

Light Gray Dark Gray Chocolate

Red

Khaki

Teal

F U

Slides over dock pipe and wraps around support stand bracket. Protects your boat from rubbing on dock. Marine-grade PVC vinyl with UV and anti-fungal protection.

23”

9-1/4”

14”

Installation: Slide the top end cap down the length of your dock post, then open the slit on the bottom end cap and wrap the cap around the post under your dock while fitting the dock hardware in the recessed back. Colors: White, Black, Blue, Green, Tan, Light Gray, Dark Gray, Chocolate, Cranberry, Khaki, Teal Volume Pack 20 pcs 18” Torpedo Post Bumper White part# D1BT18WE Black part# D1BT18BK Blue part# D1BT18BE Green part# D1BT18GN Tan part# D1BT18TN Light Gray part# D1BT18GYL Dark Gray part# D1BT18GYD Chocolate part# D1BT18CE Khaki part# D1BT18KI Teal part# D1BT18TL

2-1/4” 3-1/4”

18”

High strength and corrosion resistant. Hewitt parts and accessories are built to last.

24” Torpedo Post Bumper White* part# D1BUW Black part# D1BT24BK Blue* part# D1BUB Green part# D1BT24GN Tan part# D1BT24TN Light Gray part# D1BT24GYL Dark Gray part# D1BT24GYD Khaki part# D1BT24KI * Best Sellers

13 13

Adjustable Bumpers

It is recommended that the rub rail of your boat comes in contact with the bumper rather than the bumper to come in contact with the sides of your boat as this can result in serious damage to the sides of your boat.

Bumper Colors

White

Black

Blue

Green

Tan

Light Gray Dark Gray Chocolate

Red

Cranberry

Khaki

Teal

Indicates this product is shippable via UPS from your local dealer or visit us online at www.buyhewitt.com.

These bumpers are specially designed to work with modern truss-style docking. The bumpers have an aluminum extrusion inside the bumper with a rail exposed on the back side. The rail holds the bolt heads that can slide up or down the bumper to adjust the height before the hardware is tightened. Marine-grade PVC, Aluminum core.

36” Bumper with Aluminum Backer

Installation: Simply place the bumper in the desired location and attach the back plate and nuts.

36”

Colors: White, Black Volume Pack 28 pcs

Colors: White, Black, Blue, Light Gray, Chocolate, Green, Tan, Khaki White Black Blue Light Gray Chocolate Green Tan Khaki

Low density polyethylene.

Installation: Simply place the bumper in the desired location and attach the back plate and nuts.

30” Half-Round Bumper with Aluminum Backer - VERTICAL

2” Deep White part# D1BU36WA2W Black part# D1BU36WA2B

part# D1BU30VWE part# D1BU30VBK part# D1BU30VBE part# D1BU30VGYL part# D1BU30VCE part# D1BU30VGN part# D1BU30VTN part# D1BU30VKI

2-1/4” 5”

3-1/2” Deep White Black

part# D1BU36WAXW part# D1BU36WAXB

Volume Pack 28 pcs

Volume Pack 24 pcs

Front

Back

30” Half-Round Bumper with Aluminum Backer - HORIZONTAL

Colors: White, Black, Blue, Light Gray, Chocolate, Green, Tan, Khaki White Black Blue Light Gray Chocolate Green Tan Khaki

part# D1BU30HWE part# D1BU30HBK part# D1BU30HBE part# D1BU30HGYL part# D1BU30HCE part# D1BU30HGN part# D1BU30HTN part# D1BU30HKI

Volume Pack 24 pcs

14 14

2”

Front

Back

4-1/2”

Front Back

3-1/2”

30”

End View

4-1/2”

End View

R oll-A-Dock

V ers-A-Dock

S ectional

Wave Dock Mount

36” Adjustable Side Bumpers

Pipe Mount

part# D1BUVW

Durable plastic bumper mounted on a 2” x 2” aluminum tube (largest in the industry) with your choice of aluminum mounting hardware. This setup is completely adjustable.

C lassic dock

Large Pipe Mount

part# D1BUVP

F loating Dock

Deck Mount

part# D1BUVL

F U

U ltra Dock

Side Mount

part# D1BUVD

F U

part# D1BUVS

2-1/2 ” ID

1-3/4” ID

7”

W ave Dock

Volume Pack 24 pcs

35-1/2”

Sectional Mount

35-1/2”

Ultra Bracket

part# D1BUVV

35-1/2”

part# D1BUVDU1

U 4-1/2”

4-1/2”

1-11/32”

36” Locking Arm Bumper

35-1/2”

Must also purchase side-mount bumper. part# D1BUVS

4-1/2”

This bumper slides over the BoatPort locking arm upright to act as a bumper/centering guide.

2-1/4” ID

Volume Pack 24 pcs White part# D1BUVAW Black part# D1BUVAB

2-1/8” ID

4-1/2”

15 15

d Cleat

Rectangular and Edging Bumpers Bumper Colors

White

Black

Blue

Green

Tan

Light Gray Dark Gray Chocolate

Red

Cranberry

Khaki

Teal

Indicates this product is shippable via UPS from your local dealer or visit us online at www.buyhewitt.com.

Dockside Bumper

Lower Lip Corner Bumper Straight Bumper

Larger-sized bumper with deep projection with nautical design. Marine-grade PVC.

part# D1BDBWE part# D1BDBBK part# D1BDBBE part# D1BDBGN part# D1BDBTN part# D1BDBGYL part# D1BDBKI

(4 fasteners recommended per bumper, see page 8.)

36” Soft Harbor Bumper

F U

Handles larger watercraft. 5” of projection from the dock. Marine-grade PVC.

Marine-grade PVC. Mount on the sides of any wood or metal dock.

Colors: Black, Blue, Green, Tan, Light Gray, Khaki uty Cleat White, Volume Pack 24 pcs White Black Blue Green Tan Light Gray Khaki

Colors: White, Black, Light Gray Volume Pack 24 pcs

Colors: White, Black, Blue, Tan, Light Gray, Dark Gray, Khaki Volume Pack 24 pcs White Black UniversalBlue Bumper Tan Light Gray Dark Gray Khaki

White Black Light Gray

part# D1BUSWE part# D1BUSBK part# D1BUSBE part# D1BUSTN part# D1BUSGYL part# D1BUSGYD part# D1BUSKI

(8 fasteners recommended per bumper, see page 8.) Matching corner on page 7.

36”

(6 fasteners recommended per bumper, see page 8.)

Small Universal Bumper

part# D1BHSWE part# D1BHSBK part# D1BHSGYL

10” 17-1/4”

Corner Bumper

”

1”

5”

3”

3-1/4”

16 16

Piling Bumper

4”

5”

R oll-A-Dock

V ers-A-Dock

36” and 48” Round Edge Guard without Lip R

S ectional

48”

36”

1/2” Bolt length through bumper. 1-3/4”

3-3/4” 4-1/2”

4-1/2”

W ave Dock

36” With Lip White Black Blue Green Tan Light Gray Khaki

U ltra Dock

36” Without Lip White part# D1BUEWE Black part# D1BUEBK Blue part# D1BUEBE Green part# D1BUEGN Tan part# D1BUETN Light Gray part# D1BUEGYL Khaki part# D1BUEKI

Colors: White, Black, Blue, Green, Tan, Light Gray, Khaki. Volume Pack 24 pcs

3” 2-1/4”

F loating Dock

36” and 48” Round Edge Guard with Lip R

F U

Handles larger watercraft. Marine-grade PVC with UV and anti-fungal protection.

2-1/4

C lassic dock

part# D1BUELWE part# D1BUELBK part# D1BUELBE part# D1BUELGN part# D1BUELTN part# D1BUELGYL part# D1BUELKI

48” Without Lip White part# D1BUE48WE Black part# D1BUE48BK (Requires 4 bolts, 4 nuts and 8 washers per bumper) 3/8” x 3” SS Hex Bolt part# NB383G used with wall thickness up to 1” 3/8” x 4” SS Hex Bolt part# NB384G used with wall thickness up to 2” 3/8” Brass Nut part# NN38S 3/8” SS Flat Washer part# NW38FL

(Requires 3 bolts, 3 nuts and 6 washers per bumper) 3/8” x 3” SS Hex Bolt part# NB383G used with wall thickness up to 1" 3/8” x 4” SS Hex Bolt part# NB384G used with wall thickness up to 2" 3/8” Brass Nut part# NN38S 3/8” SS Flat Washer part# NW38FL

17 17

Edging Bumpers

Bumper Colors

White

Black

Blue

Green

Light Gray Dark Gray Chocolate

Tan

Red

Cranberry

Teal

Khaki

Indicates this product is shippable via UPS from your local dealer or visit us online at www.buyhewitt.com.

24”and 36” Plastic Bumpers

43” Frame Bumper R

High-strength polyethylene plastic formulated with UV protection for the marine environment. Mount to square poles with recessed mounting holes.

Durable polyethylene with UV inhibitors. Molded-in recessed mounting holes make the frame bumper easy to mount.

Colors: White, Black, Green, Tan, Light Gray. Volume Pack 24 pcs

White part# D1BUFRW Black part# D1BUFRB Volume Pack 24 pcs

24” Bumpers Flat back-White 2” slot-White 2” slot-Black 3-1/2” slot-White 3-1/2” slot-Black 3-1/2” slot-Light Gray

part# D1BUVP24FW part# D1BUVP24W part# D1BUVP24B part# D1BUVP243W part# D1BUVP243B part# D1BUVP243GYL

24”

36” Bumpers 2” slot-White part# D1BUVP2W 2” slot-Black part# D1BUVP2B 2” slot-Green part# D1BUVP2G 2” slot-Tan part# D1BUVP2TN 2” slot-Light Gray part# D1BUVP2GYL 2-1/2” slot-White part# D1BUVP212W 2-1/2” slot-Black part# D1BUVP212B 2-1/2” slot-Light Gray part# D1BUVP212GYL (Mounted to 2x2 tube. Requires 2 bolts, 2 nuts and 4 washers per bumper) 1/2” Bolt 3/8” x 3-1/2” SS Hex Bolt part# NB38312G length (Used with tube thickness up to 2”) through bumper 3/8” Brass Nut part# NN38S 3/8” SS Flat Washer part# NW38FL 36” Bumpers 1/2” Bolt 3-1/2” slot-White part# D1BUVP3W length through 3-1/2” slot-Black part# D1BUVP3B bumper (Mounted to 3x3 tube. Requires 2 bolts, 2 nuts and 4 washers per bumper) 3/8” x 4-1/2” SS Hex Bolt part# NB38412G (Used with tube thickness up to 3”) 3/8” Brass Nut part# NN38S 1/2” Bolt length 3/8” SS Flat Washer part# NW38FL through bumper

18 18

X36” Bumpers X36” Plastic with 3-1/2” Slot-White part# D1BUVP312W Kayak Rack X36” Plastic with 3-1/2” Slot-Black part# D1BUVP312B Kayak Rack (Mounted to 3x3 tube. Requires 2 bolts, 2 nuts and 4 washers per bumper) 2-1/8” Bolt length 3/8” x 6” Bolt part# NB386G through bumper (Used with tube thickness up to 3”) 3/8” Brass Nut part# NN38S 3/8” SS Flat Washer part# NW38FL

”

43-1/2

12”

(Requires 4 bolts, 4 nuts and 8 washers per bumper) 3/8” x 5” SS Hex Bolt part# NB385G used with wall thickness up to 1” 3/8” x 6” SS Hex Bolt part# NB386G used with wall thickness up to 2” 3/8” Brass Nut part# NN38S 3/8” SS Flat Washer part# NW38FL

36”

5-1/4”

4-3/8” Bolt length through bumper

Frame Bumper Backing Plate

2”

3/8” x 2” Aluminum. Volume Pack 200 pcs

2” 3/4”

part # D1BUFRP

4-1/2” 2-1/2” 2”

Pier Bumper C

3/4”

Mount on the sides of any wood or metal dock. Marine-grade PVC.

4-1/2” 3-1/2”

Colors: White, Black, Blue, Tan, Light Gray, Khaki Volume Pack 24 pcs (4 fasteners recommended per bumper, see page 8.)

2”

3/4” 4-1/2”

Table Accessories

3-1/2”

Table Accessories White 3-1/2”

3/4” 4-1/2”

Black Blue Tan Light Gray Khaki

part# D1BPBWE part# D1BPBBK part# D1BPBBE part# D1BPBTN part# D1BPBGYL part# D1BPBKI

PIER17-1/2” BUMPER

PIER BUMPER

5”

1-3/4”

Pier Bumper

Lower Lip Corner Bumper

Universal

Cooler dock cleat

Heavy Duty Cleat

Universal Bumper

dock cleat seat Small R oll-A-Dock

V ers-A-Dock

S ectional

Universal Bumper

C lassic dock

F loating Dock

W ave Dock

U ltra Dock

Corner Bumper

dock cleat seat

Piling Bumper

Cushion Bumper

Designed to mount vertically on pilings to provide protection Piling Bumper to watercraft. The concave shape provides a perfect mating Truss Bumper

Upper and lower lip wrap around the dock. Waffle effect backside for additional cushioning. Marine-grade PVC.

surface to pilings. Marine-grade PVC.

Colors: White, Black, Blue, Light Gray Volume Pack 24 pcs White part# D1BCBWE part# D1BCBBK Black Blue storage boxes part# D1BCBBE part# D1BCBGYL Light Gray

36”

5-3/4” Cushion Bumper

(8 fasteners recommended per bumper, see page 8.)

Piling Bumper

Colors: White, Black, Blue, Light Gray, Khaki Volume Pack 40 pcs

mooring cleat

Harbor Straight Bumper

2”

White Black Blue Light Gray Khaki

24”

part# D1BPWE part# D1BPBK part# D1BPBE part# D1BPGYL cleat part#mooring D1BPKI

2-3/4

(12 fasteners recommended per bumper, see page 8.)

3-3/4”

4”

storage boxes Poly Harbor Cushion

Cushion Bumper

Poly Bumper Backing Plate

Durable polyethylene with UV inhibitors. Molded-in recessed mounting holes make the frame bumper easy to mount. 48” White Black

part# D1BPHSW part# D1BPHSB

Harbor Straight Bumper 3/8” x 2” Aluminum.

48”

part # D1BPHCP 11-1/2”

5/8” Bolt length through bumper

Volume Pack 24 pcs (Requires 4 bolts, 4 nuts and 8 washers per bumper) 3/8” x 3” SS Hex Bolt part# NB383G used with wall thickness up to 1” 3/8” x 4” SS Hex Bolt part# NB384G used with wall thickness up to 2” 3/8” Brass Nut part# NN38S 3/8” SS Flat Washer part# NW38FL

4-1/2”

Matching corner on page 8.

19 19

Rub Rails

Bumper Colors

White

Black

Blue

Green

Tan

Light Gray Dark Gray Chocolate

Red

Khaki

Indicates this product is shippable via UPS from your local dealer or visit us online at www.buyhewitt.com.

The industry’s finest quality, workmanship and design.

20 20

Teal

R oll-A-Dock

V ers-A-Dock

5002 Rub Rail – 10’ length R

S ectional

C lassic dock

F loating Dock

5001 Rub Rail – 10’ length R

F U

White

part# D1BUB5002W

White

part# D1BUB5001W

Black

part# D1BUB5002B

Black

part# D1BUB5001B

Dark Gray

part# D1BUB5002GYD

Volume Pack 100 pcs

W ave Dock

U ltra Dock

F U

(40 fasteners recommended per bumper, see page 8.)

Volume Pack 96 pcs (40 fasteners recommended per bumper, see page 8.)

1.15”

1.10”

.275”

1.25”

1”

.875”

White

part# D1BUB5007W

Black

part# D1BUB5007B

.25” .75”

3”

3.5”

5007 Rub Rail – 10’ length V

.25”

Volume Pack 96 pcs (40 fasteners recommended per bumper, see page 8.)

.197”

1.105”

.747”

123°

.296” 3.75”

21 21

Brackets and Lights Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

Aluminum Mud Pads 1-1/4” Standard 1-1/2” Large

1-3/4” ID 2-1/2” ID

F W U

part# DAMUD part# DAMUDLG

Wheel Pad

C U

Slides on wheel upright axle. part# DCMUD

Vers-A-Dock Corner Pipe Holder

Connection Clamp

Used for connecting Vers-A-Dock and Classic dock sections together.

Used to add a corner post to the part# DV101 Vers-A-Dock.

part# DV102

8-1/2” 8-1/2” 12”

12”

Support Stand Brackets

Galvanized bracket 2” medium 2-1/2” large 3-1/4” extra large Aluminum bracket 1-1/4” standard 2-1/2” large short 2-1/2” large long

X-Large

ID 2” 2-1/2” 3-1/4”

Finish galvanized galvanized galvanized

Part# DSBRACM DSBRACLG DSBRACXL

1-3/4” 2-1/2” 2-1/2”

aluminum aluminum aluminum

DABRAC DABRACLG DABRACLGL

Large Long

Unidock Clamp U

5-3/4”

5-1/4”

Used for connecting Ultra Dock sections together. part# DUCLAMP

Large 5-1/4”

Large Short 10”

5-1/4”

Medium 4-3/4”

10”

Standard 5-1/4”

4”

10” 5-1/4”

5-1/4”

4”

4-1/2” 13”

11-1/2”

3” 3”

3”

5”

Hinged Sea Wall Brackets R

For mounting Roll-A-Dock to sea wall face.

22 22

part# D1SWBHI

Hooked Sea Wall Brackets

Hooks Roll-A-Dock to sea walls up to 4-1/2” thick. Custom sizes available for Vers-A-Dock, Classic and other types of docks. part# D1SWBH

Sectional Sea Wall Brackets

Mounts sectional docks to sea walls. part# D1SWB

Ultra Sea Wall Brackets

C U V

Mounts to sea wall and allows dock section to set in. Secured with set screw. part# DUSB

R oll-A-Dock

V ers-A-Dock

S ectional

Ultra Pipe Brackets

Deck Light

Heavy-duty pipe brackets for Ultra Dock. Standard - for 1-1/4” Pipe part# DUBRAC Medium - for 1-1/2” Pipe part# DUBRACM Large - for 2” Pipe part# DUBRACL

Industrial strength low profile aluminum solar powered deck light made for superior protection. Deck lights have a built in reflector (104mm x 106mm) One Light part# D1LDECK

C lassic dock

F loating Dock

Post Light U

F W U

Great way to light up your dock or pier. Lasts 18+ hours on a full charge and much brighter. Automatically turns on the super bright LED.

W ave Dock

U ltra Dock

Wave Dock Hexagon Solar Light W Solar-powered light ensures visibility.

One Light part# DF301126

Two Lights part# D1LPOST Volume Pack 24 pcs

Volume Pack 48 pcs

hewittrad.com 23 23

Augers, Pipes, Tires and Bracing Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

Roll-In Wheel

Augers

Attach auger at end of post and turn post to auger into the bottom of lake bed.

(Do not fit Hewitt axles.)

DB800-standard 1-5/8” inside diameter (slides over pipe)

part# DAMUDP

DB903-medium 1-7/8” inside diameter (slides over pipe)

part# DAMUDPM

DB400-large 2” outside diameter (slides inside pipe) Requires drilling and 3/8” x 3” bolt and nut.

part# DAMUDPLG

For use with roll-in dock and lift applications. 7-1/2”

7-1/2”

Wheels weigh 12 pounds each with an estimated weight limit of 750 pounds each or 1500 pounds per pair. High strength plastic wheel with UV protection. 24” Diameter, 8” Wide Volume Pack 80 pcs 1-1/4” axle, 1-5/8” od 1-1/2” axle, 1-7/8” od 2” axle, 2-3/8” od

Post Ratchet

F W U

part# D1TIRE114 part# D1TIRE112 part# D1TIRE2

24”

18” Diameter, 8” Wide Volume Pack 40 pcs

Provides leverage to easily install and remove pipes with augers. This 19” handle and reversible ratchet fits 1-1/4”, 1-1/2’, and 2” pipes up to 2-1/4” O.D.

1-1/4” axle, 1-5/8” od 1-1/2” axle, 1-7/8” od 2” axle, 2-3/8” od

part# DAPR

part# D1TIRE18-114 part# D1TIRE18-112 part# D1TIRE18-2 18”

Support Stand Pipes

F W U

Fishing Rod/Cup Holder

DAP8

10’ DAP10

12’ DAP12

21’ DAP20

24’ N/A

DGP81/4 DGP8M DGP8L DGP8XL

DGP101/4 DGP10M DGP10L DGP10XL

DAP121/4 DGP12M DGP12L DGP12XL

DGP211/4 DGP21M DGP21L DGP21XL

DGP241/4 DGP24M DGP24L DGP24XL

Rigid aluminum bracket mounts to 1-1/2” outside diameter post. Two flush-mount cup holders and two mounted rod holders along with a spot for a needle-nose pliers.

Galvanized pipe with auger and hole for post ratchet. 2” 2-1/4” N/A DGP8LWA DGP10LWA

DGP12LWA

N/A

Aluminum ID OD 1-1/4” 1-1/2” Galvanized 1-1/4” 1-1/2” 2” 2-1/2”

24 24

1-1/2” 1-3/4” 2-1/4” 2-3/4”

R 5’

DAP5 DGP51/4 DGP5M DGP5L DGP5XL

8’

part# D1ROD

F W U

R oll-A-Dock

V ers-A-Dock

Hewitt Standard Plastic Tire

These are Hewitt’s standard tires and fit all Hewitt axles and wheel kits.

S ectional

C lassic dock

F loating Dock

25” Otter Tire

Volume Pack 100 pcs

27”

16” Tire 12lbs (950 lbs capacity) part# DWHEELS

16”

Non-Vented 14lbs (1150 lbs capacity) part# DF300450

F U

Provides leverage for adjusting your dock. Winch slides over dock post. Winch kit pipe has a 2” inside diameter.

14lbs (1150 lbs capacity) part# DF300449

27” Tire Heavy-duty 24lbs (1300 lbs capacity) part# DWHEELHD

U ltra Dock

Post Winch Kit

1-7/8” Axle Opening. Does not fit Hewitt axles.

27” Tire Standard 18lbs (950 lbs capacity) part# DWHEEL

W ave Dock

part# DAPW 25”

Polyethylene tire features seamless construction and venting.

Aluminum Cross Brace Kit

2’ Cross Brace Kit V

For more stability in muddy or deep water. Heavy-duty extruded ends slide over pipe and secure with large set screws. (complete X)

Aluminum cross bracing that works great in shallow waters on the ends and sides of the dock. One end clamps to dock and other end slides over pipe.

Length

Part #

5’ kit

1-3/4”

DS1095

R V S C U

8’ kit

1-3/4”

DS108

R V S C U

5’ kit

2-1/2”

DS1095L

8’ kit

2-1/2”

DS108L

2’ Pipe to Frame

part# DS13

Quick Change Cross Bracing

Add galvanized steel dock leg bracing from on top of your dock, without going under water, and keeping superior strength with a simple design. Fits pipe up to 1-1/2” OD. 5’ Pipe to Frame part# DV1035 R

V S C U

part# DV1036 R

S U

Fits pipe up to 2-1/4” OD. 7’ Pipe to Frame part# DV1037 R

C U

6’ Pipe to Pipe

25 25

Dock Wheels and Accessories Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

Dock Hitch R

Heavy duty aluminum hitch for easier dock removal or installation. Attach to an SUV, lawn mower or ATV. 4’ wide 6’ wide

part# D1HITCH part# D6HITCH

Adjustable Shore End Helper Wheel

Attaches to shore end of dock to help with dock installation or removal without lifting or carrying over rocks or other rough terrain.

Swivel Wheel R

The aluminum fork and tongue slides into the heavy-duty aluminum cross bar that attaches to the shore end of dock. Used to maneuver dock around objects. 4’ wide swivel wheel

part# D1HSW

C R 4’ wide aluminum with 3’ tall pipe R 6’ wide aluminum with 3’ tall pipe

part# D1HSAA3 part# D6HSAA3

C R 4’ wide aluminum with 5’ tall pipe R 6’ wide aluminum with 5’ tall pipe

part# D1HSAA5 part# D6HSAA5

C R 4’ wide aluminum with 8’ tall pipe R 6’ wide aluminum with 8’ tall pipe

part# D1HSAA8 part# D6HSAA8

U 4’ wide Ultra with 3’ tall pipe

part# DUSEW3 part# DUSEW5

U 4’ wide Ultra with 5’ tall pipe

26 26

R oll-A-Dock

Dock Crank Handle

V ers-A-Dock

Removable handle to raise and lower the Roll-A-Dock.

C lassic dock

F loating Dock

W ave Dock

U ltra Dock

Deep Water Kit R

Used to plug deck hole when crank handle is removed.

Replaces the standard wheel assembly to adjust up to 8’. 4’ Aluminum 4’ Galvanized 6’ Galvanized

part# DPLUG

part# DHANDLE

Deep Water Extensions

Dock Hole Plug

S ectional

part# DDEEPA part# DDEEPG part# D6DEEPG

Converts the standard 4’ wide aluminum wheel assemblies to accommodate 8’ water depths by making it telescope (cutting required). Replaces the standard wheel assembly to adjust up to 8’. 48”

Aluminum

part# DDEEPA3-3

Helper Wheel for “L”

Attaches to dock ends to assist in removing or installing “L” or “T” dock sections. 4’ wide with 5’ upright 4’ wide with 8’ upright 4’ wide with screw upright 6’ wide with 5’ upright 6’ wide with 8’ upright 6’ wide with screw upright

part# D1HLA part# D1HLA8 part# D1HLAS part# D6HLA part# D6HLA8 part# D6HLAS

*Recommended use of 3’ x 3’ cap for 4’, 6’ & 8’ models. See page 62.

8’ Helper Wheel for “L” R

Attaches to sides of 8’ sections or end of two 4’ sections to assist in removing or installing “L” or “T” dock sections. 8’ wide with 5’ upright 8’ wide with 8’ upright 8’ wide with screw upright 8’ wide with two 5’ uprights 8’ wide with twp 8’ uprights 8’ wide with two screw uprights

part# D8HLA part# D8HLA8 part# D8HLAS part# D8HLAD part# D8HLAD8 part# D8HLADS

Screw Upright with Patent-Pending Brake and Stop Bolt

Adjustable Screw Drive Bit Fits all screw legs except the classic dock screw legs. part# LLSAB

27 27

Sectional Dock Systems, Hinges and Plates Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

Sectional Dock S

Add your own decking to our permanent aluminum framed dock system. part# DSFRAME5 part# DSFRAME8 part# DS6FRAME5 part# DS6FRAME8

4’ x 8’ Frame with 5’ support pipes 4’ x 8’ Frame with 8’ support pipes 6’ x 8’ Frame with 5’ support pipes 6’ x 8’ Frame with 8’ support pipes

4’ x 10’ Frame with 5’ support pipes 4’ x 8’ Frame with 8’ support pipes 6’ x 10’ Frame with 5’ support pipes 6’ x 10’ Frame with 8’ support pipes

part# DSFRAME105 part# DSFRAME108 part# DS6FRAME105 part# DS6FRAME108

Price includes: Two extruded sides, One 4’ or 6’ cross arm bracket, Two 1-1/4” aluminum support pipes and Two aluminum mud plates.

4’ and 6’ Turn Arm Bracket S

Used to construct right angles, deck peninsulas, or “L” or “T” sections. 4’ Turn bracket only One 5’ Aluminum pipe only 4’ Turn bracket kit w/5’ pipe 6’ Turn bracket kit w/5’ pipe

part# DS103 part# DAP5 part# DS1035 part# DS1135

6’ Turn bracket only One 8’ Aluminum pipe only 4’ Turn bracket kit w/8’ pipe 6’ Turn bracket kit w/8’ pipe

part# DS113 part# DAP8 part# DS1038 part# DS1138

Price includes: One 4’ or 6’ turn bracket, One 1-1/4” aluminum pipe and One aluminum mud plate.

Make your own dock! 4’ or 6’ Aluminum Cross Arm S Support pieces for dock ends.

4’ Cross arm only One 5’ Aluminum pipe only One Aluminum mud plate only 4’ Cross arm kit with 8’ support pipes 6’ Cross arm kit with 8’ support pipes

part# DS102 part# DAP5 part# DAMUD part# DS1028 part# DS1078

6’ Cross arm only One 8’ Aluminum pipe only 4’ Cross arm kit with 5’ support pipes 6’ Cross arm kit with 5’ support pipes

part# DS107 part# DAP8 part# DS1025 part# DS1075

Price includes: One 4’ or 6’ cross arm bracket, Two 1-1/4” aluminum support pipes and Two aluminum mud plates.

4’ and 6’ End Caps S

Closes off dock ends for a more finished look.

28 28

4’ Aluminum

part# DS122

6’ Aluminum

part# DS6122

Sectional Starter Piece S

Keeps front of dock from sinking into sand. 4’ Starter piece

part# DS120

R oll-A-Dock

V ers-A-Dock

S ectional

C lassic dock

F loating Dock

W ave Dock

U ltra Dock

3” or 3-1/4” RIGHT 7-3/8”

TALL 8-1/2”

SHORT 2-1/2”

MEDIUM 4-1/2”

36” LEFT

Small Heavy-Duty Hinges

4’ aluminum small heavy duty 6’ aluminum small heavy duty

3-1/4” 3-1/4”

Used on longer multi-section Roll-A-Docks over 48’ long equipped with two or more wheel bases. Small heavy-duty hinge has a 2-hole bolt pattern.

Piano Hinges

Our most popular hinge provides good appearance with maximum strength. Piano hinge has a 3-hole bolt pattern. Has replaceable internal PVC to make a quiet hinge and reduce wear on aluminum parts. 2’ Bolt-on Piano Hinge – Short/Short 2’ Bolt-on Piano Hinge – Short/Medium 2’ Bolt-on Piano Hinge – Short/Tall 2’ Bolt-on Piano Hinge – Tall/Medium 2’ Bolt-on Piano Hinge – Tall/Tall

part# D2HINHSS part# D2HINHSM part# D2HINHST part# D2HINHTM part# D2HINHTT

3’ Bolt-on Piano Hinge – Short/Short 3’ Bolt-on Piano Hinge – Short/Medium 3’ Bolt-on Piano Hinge – Short/Tall 3’ Bolt-on Piano Hinge – Tall/Medium 3’ Bolt-on Piano Hinge – Tall/Tall

part# D3HINHSS part# D3HINHSM part# D3HINHST part# D3HINHTM part# D3HINHTT

4’ Bolt-on Piano Hinge – Short/Short 4’ Bolt-on Piano Hinge – Short/Medium 4’ Bolt-on Piano Hinge – Short/Tall 4’ Bolt-on Piano Hinge – Tall/Medium 4’ Bolt-on Piano Hinge – Tall/Tall

part# D1HINHSS part# D1HINHSM part# D1HINHST part# D1HINHTM part# D1HINHTT

6’ Bolt-on Piano Hinge – Short/Short 6’ Bolt-on Piano Hinge – Short/Medium 6’ Bolt-on Piano Hinge – Short/Tall 6’ Bolt-on Piano Hinge – Tall/Medium 6’ Bolt-on Piano Hinge – Tall/Tall

part# D6HINHSS part# D6HINHSM part# D6HINHST part# D6HINHTM part# D6HINHTT

8’ Bolt-on Piano Hinge – Short/Short 8’ Bolt-on Piano Hinge – Short/Medium 8’ Bolt-on Piano Hinge – Tall/Medium 8’ Heavy Duty Alum Piano Hinge

part# D8HINHSS part# D8HINHSM part# D8HINHTM part# D8HINAP

Corner Support Hinge

Used with piano hinge to secure fingers or walkways on floating docks. This hinge needs a special plate welded to the dock for mounting. Left Right

part# D1HINACL part# D1HINACR

Large Heavy-Duty Hinges R

part# D1HINAHS part# D6HINAHS

Used in rough water where up and down flex is needed. Heavy-duty hinge has a 3-hole bolt pattern. 4’ aluminum heavy duty 6’ aluminum heavy duty 4’ galvanized heavy duty 6’ galvanized heavy duty

3-1/4” 3-1/4” 3” 3”

part# D1HINAH part# D6HINAH part# D1HINGH part# D6HINGH

Aluminum Transition Plate

Heavy-Duty Aluminum Transition Plate

Create a smooth transition between dock sections or seawall. (Hardware not included)

4’ 5’ 6’ 8’

4’ 6’ 8’ 12’

part# D1TP4 part# D1TP6 part# D1TP8 part# D1TP12

part# D1TPHD4 part# D1TPHD5 part# D1TPHD6 part# D1TPHD8

24”

Weld hinge to your ramp/gangway, dock or seawall. part # ADD-00114

12”

1/2” x 5” SS Hex Bolt part # NB125G 1/2” Coated Hex Lock Nut part #NN12L (Three are used on each plate.)

29 29

Dock Ramps and Corner Triangles Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

Roll-A-Dock Ramp

Ultra Dock Ramp U

Used for the transition between the dock and your shoreline. This ramp features a tip-over design. No need to unbolt the ramp at the end of the season or when mowing around docks. Simply flip it over! Four decking options available.

Used for the transition between the dock and your shoreline. Two decking options available; includes hinge kit. 2-5/8”

4’ x 4’ 6’ x 4’ 4’ x 8’ 6’ x 8’ 4’ x 12’

Sectional Dock Ramp

Used for the transition between the dock and your shoreline. Three decking options available; includes hinge kit; drilling required. 4’ x 4’ 4’ x 8’

Wave Dock Ramp W

6’ x 4’ 6’ x 8’

Paver-style “pebble beach” textured deck finish. Rotationally molded with high-impact polyethylene and maximum UV protection. 2-5/8”

Vers-A-Dock Ramp

4’ x 4’ 4’ x 8’ 4’ x 12’

7’ Wave Dock Ramp 12’ 8” Wave Dock Ramp

DF300055 DF301518

Used for the transition between the dock and your shoreline. Three decking options available; includes hinge kit.

Custom Aluminum Ramp with Wave Armor Deck W

4’ x 4’ 4’ x 8’

5x10’ 5x20’ 2-5/8”

Classic Dock Ramp C

D1FMWD5X10 D1FMWD5X20

*Must purchase custom Wave Dock hinge. D1HINCH

Custom Aluminum Ramp with Beige Aluminum Decking W

Used for the transition between the dock and your shoreline. Three decking options available; includes hinge kit.

4x10’ 5x10’

4’ x 4’ 4’ x 8’ 2-5/8”

4x16’ 5x16’

4x20’ 5x20’

4x24’ 5x24’

*Must purchase custom Wave Dock hinge. D1HINCH * Also available with ThruFlow™ decking.

30 30

2” frame on 4’ long ramps. 2-5/8” frame on 8’ and 12’ long ramps plus height of decking.

R oll-A-Dock

4’ Triangle Corners

V ers-A-Dock

Triangle corners for truss frame docks have a 2” frame with choice of four decking options. Aluminum and cedar shown at right. (Bolts on, drilling required. Purchase three Connection Clamps for clamp on - DV102.)

4’ Ultra Dock Triangle Corner U

Triangle corner with 2” aluminum frame. Choose from white or woodgrain aluminum and white, beige, or gray ThruFlow™. (Clamps on.)

S ectional

C lassic dock

F loating Dock

4’ Classic Dock Triangle Corner

4’ Vers-A-Dock Triangle Corner

W ave Dock

U ltra Dock

Classic Dock triangle corner has a 5” classic extruded frame with choice of three decking options. ThruFlow™ decking, shown right, is one option available. (Clamps on.)

Vers-A-Dock triangle corners have a 2” frame with choice of 3 decking options. Shown to the right is a Vers-A-Dock with aluminum decking. (Bolts on, drilling required. Purchase three Connection Clamps for clamp on - DV102.)

hewittrad.com

31 31

Decking Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

Decking Options Hewitt offers several different decking options. Each style is unique. Let us help you decide what best fits your needs. Hewitt can customize your dock with any of these listed materials. If you have any questions, please contact your local dealer.

Cedar. A traditional favorite. Solid, durable wood that is naturally weather resistant. Cedar boards come in 5/4” radius smooth planks. R

Skidguard. A waffle-weave textured panel with a heavy-duty phenolic overlay. Skidguard provides a continuous, no-gap surface that is highly resistant to peeling or chipping.* R

BEIGE WHITE

* not available on 6’ wide docks.

QT Powder Coated All-Aluminum. Extruded aluminum decking that offers superior strength, low weight and corrosion resistance. Incorporates sound deadening material and a baked-on beige, white, or woodgrain finish for a durable nonskid surface. Custom colors available. R

F U

WOODGRAIN

BEIGE WHITE GRAY

32 32

*Woodgrain available for Ultra Dock and Residential Gangways only.

ThruFlow™. Reinforced polypropylene finished decking system, designed for easy assembly that requires no maintenance. Its strong, durable, lightweight design makes for a perfect finish on our docks. ThruFlow™ allows water and debris to fall through your dock surface. R

F U

ThruFlow™ Decking

PER PIER BUMPER

Pro Guard Bumper Pro Guard Bumper Corner W

ThruFlow™

The complete flooring system for docks, decks, marinas, gangways and walkways. Easy to assemble, maintenance-free and long-lasting.

ThruFlowTM is designed and engineered to be the finished decking surface for docks, decks, walkways and virtually any indoor or outdoor structure. ThruFlowTM panels are the ideal choice for: Docks and piers, decks and patios, marinas, walkways, gangways and ramps, any area prone to storm effects, or environmental sensitivity.

Safety First

Proprietary molded-in 360 degree non-slip surface makes ThruFlowTM safe for children and always comfortable on the feet. ThruFlowTM also has complete fresh and saltwater tolerance.

GRAY

WHITE

BEIGE

A grated design allows for maximum light penetration; protecting sensitive sea grasses and marine life. Total open area amounts to 43%.

ThruFlow™ Decking White 1x3 1x4 1x5 4x4

part# D1DTF3X1 part# D1DTF4X1 part# D1DTF5X1 part# D1DTF4X4

Volume Pack 280 pcs 280 pcs 280 pcs 70 pcs

Mounting Holes 6 8 10 32

Beige 1x3 1x4 1x5 4x4

part# D1DTFB3X1 part# D1DTFB4X1 part# D1DTFB5X1 part# D1DTFB4X4

Volume Pack 280 pcs 280 pcs 280 pcs 70 pcs

Mounting Holes 6 8 10 32

Gray 1x3 1x4 1x5 4x4

part# D1DTFG3X1 part# D1DTFG4X1 part# D1DTFG5X1 part# D1DTFG4X4

Volume Pack 280 pcs 280 pcs 280 pcs 70 pcs

Mounting Holes 6 8 10 32

Pier Bumper

Environmentally Friendly

Pier Bumper

Maintenance-free

As a non-microbial product, ThruFlowTM does not allow for any leaching, rot, mildew or insect growth. There is absolutely no treatment required.

Durable

Not only does ThruFlowTM have unparalleled strength, but its open design minimizes the lifting effects that waves and storm surge have on your dock. Survive the storm with ThruFlowTM.

ThruFlow™ Self-Tapping Screws

High-quality screws fasten with a large .455” head. Ideal for aluminum frames. Coated Screws for Steel Frames

Stainless Steel Screws for Aluminum Frames One each part# NS10134FH Volume Pack 400 pcs

Bolt Screw .455”

One each part# NS10134FHPSD Volume Pack 400 pcs

Bolt Screw

Stainless Steel Screws for Wood Frames

Corner Whe

One each part# NS102PH Volume Pack 400 pcs

.455”

33 33

Wave Armor Dock Accessories Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

Wave Dock Bumpers W

Slim Dock Bumpers

Vertical 15.5”H x 9.5”D Extends 4” above dock surface. part# DF301103

Vertical 32”H x 10”W x 5.5”D Extends 3” above dock surface. part# DF301510

Horizontal 24”L x 12”H x 8.5”D Sits flush with dock surface. part# DF300069

Horizontal 32”H x 10”W x 5.5”D Extends 20” above dock surface. part# DF301350

Large Vertical Dock Bumpers 10”W x 15.5”D x 44”H Extends 27” above dock surface. part# DF300979

34 34

36” Vinyl Bumper W Adjustable in height. Includes universal H-beam. part# D1BUVW

Dock Ramp with Tapered End and Hinge Kit

7’ Long part# DF300055

10” Pylon Hoop Attachment W

Mooring Chain Adaptor W

(Qty 1)

Insert Only. For 3/8” and 1/2” chain. Mounts to post attachment kits.

part# DF300106

12’8”’ Long part# DF301518

part# DF21926

Custom sizes available.

Mooring Cap W Mounts to post attachment kits. part# DF300493

Universal H-Beam T-Plate Connector W

5” Filler (Decorative Side Panel) W

Connector secures personalized accessories.

Creates a finished look.

7” (sold as single) part# DF302593 12” (2 pcs) part# DF301504

(8 pcs) part# DF301530

Corners W Adds to your surface area. 30” Corner Deck Section part# DF300051 40” Corner Deck Section part# DF302047 60” Corner Deck Section part# DF301577

Winch Mooring Adaptor W Mounts to post attachment kit. Winch and handle sold separately. part# DF21925

35 35

Wave Armor Dock Accessories Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

Ramp Abutment W

Wave Dock Post Cover W

7’ Long part# DF301509

Slides over post. Mounts to Attachment Kit sold separately. (2 pcs) part# DF301532

12’8” Long part# DF301661

Universal Dock & Patio Bench W 4’ Bench: 52”W x 37”H x 27”D. 66 lbs. part# DF300014 5’ Bench: 64”W x 37”H x 27”D. 81 lbs. part# DF301092 6’ Bench: 76”W x 37”H x 27”D. 96 lbs. part# DF300016

Wave Dock Post Attachment Kit (with 4” flat insert) W (With flat reducer bushing) (Pair - 2 pcs) part# DF301610

With Solar Light Pocket part# DF302132 - (2 pcs) part# DF302133 - (8 pcs)

Floating Dock Ladder W Folds up when not in use. part# DF300081

Heritage Dock Post Cover W Post covers are eloquently designed with molded-in through holes that accomodate rope up to 1-1/2” D. Covers feature a recessed pocket on top to secure Hexagon Solar Light. Slides over post. part# DF301262 Slides into H-beam. part# DF301278

36 36

Wave Armor Hand Railing W Single Handrail 5’ part# D1RAILCW5 10’ part# D1RAILCW10 Must purchase two universal H-beams per each handrail. part# DF302593

Decorative Snap-in Plugs W (Qty 20) For a clean, finished look. part# DF301574

Dock Locker Box High-impact molded polyethylene and UV protection. Pebble Beach Textured Finish. (Fits 5’ Bench only) Storage Box part# DF301093

60” Half Round Dock W (2-Piece) part# DF301910

Kayak Rack W Stows two kayaks or canoes. part# DF300107

40” Half Round Dock W part# DF302055

60” Quarter Round Dock W (2-Piece) part# DF301841

Wave Dock Post Attachment Kit (Raised Insert) W part# DF302065 part# DF302214 part# DF301608 part# DF301526 part# DF301527

Dock Bench Attachment System Places the bench over the water. part# DF300963

Dock Wedge W Creates a 30-degree angle. 40” part# DF301091 60” part# DF301090

37 37

Wave Armor Dock Accessories Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

Patio Chair for Wave Dock W

Kayak Launch Loops W

Kayak Assist W

Powder-coated aluminum, adjustable swivel rocker mechanism. Chair is wrapped with two layers of fabric and is durable and comfortable. Includes T-plate and powder coated bracket for mounting chair to Wave Dock.

Get in and out of kayaks and canoes with ease. Heavy-duty aluminum frame.Six adjustable settings.

Provides stability when launching or exiting kayaks and canoes. Mounts to Lower Step Down. Includes one rail and float.

Launch with Wave Dock Bracket part# D1KLW

Kayak Assist only part# DF301246

Optional Guide Bunk part# NABPBP

Step Down only part# DF301096

part# DPCHAIRW

30” Patio Table for Wave Dock W

Entire Kit part# DF301753

Low-maintenance powder-coated aluminum mesh table. Includes hole for optional umbrella and T-plate and powder coated bracket for mounting table to Wave Dock. part# DPTABLEW

Wave Dock Bracket W

Cleat W

Mount patio chairs and table with ability to reposition chairs anytime. Aluminum bracket is powder-coated to match the table and chairs.

Wave Dock 10” Aluminum Dock Cleat (2) part# DF301779

Small Planter/ Flower Pot W part# DF301844

part# DPBRKTW Must purchase T-plate DF302593

Large Planter/ Flower Pot W 38 38

part# DF301776

Garbage Can With Lid W part# DF301775

Smart Steps Kit/ Universal Dock Steps Kit W Includes two steps, t-plate, and mount. part# DF301809

R oll-A-Dock

V ers-A-Dock

S ectional

C lassic dock

F loating Dock

W ave Dock

U ltra Dock

Premium Residential and Commercial Floating Docks and Ports Built to Last a Lifetime

39 39

Wave Armor Dock Accessories Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

Otter Island Raft Anchor Made of 100% high-density polyethylene. Just fill it with sand and this 140 lb anchor will keep your raft where you want it. part# DF300003 Volume Pack 6 pcs

Otter Island Raft Cover

Made to protect your raft from UV rays and storage during the off season. part# DF300050

Double Clevis Kit

This complete hardware kit is designed for quick, easy attachment of an anchor to your Hewitt swim raft or Otter Island raft, using rope or chain. The kit includes two 32” lengths of galvanized chain with a clevis at each end for attachment to the raft’s eyelets. Two sections of stretch rope are provided as a flexible link that hooks between the eyelet at the center of the clevis chain and your anchor rope or chain.

Otter Island Seat Cushion This padded seat fits over the backrest and provides a comfortable seating surface. Made of durable quick-dry fabric and foam. part# DF301545

Bird Deterrent

Attaches to raft and will keep birds away and your raft clean. Removable when raft is in use. part# DBIRDR

REMOVABLE

part# DF302209 Volume Pack 12 pcs Clevis Only part# DF301547

hewittrad.com 40 40

Storage Boxes and Coolers

Wave Armor Coolers

Universal Storage Box

F W U

Thick and rugged roto-molded polyethylene. Grizzly Bear Certified by National Park Service. Other features include pressure-injected polyurethane insulation, saltwater-tested hinge pins and hardware and freezer-quality gasket. Aluminum core foam encased handles and quickrelease compression lid latches make handling easy. Oversized non-slip, non-marking feet, quick-turn drain plug with gasket, hold-fast tie down slots and secure padlock thru-holes (lockable). 22-quart cooler 42-quart cooler

part# DF301548-WHITE part# DF301034-WHITE

F W U 17-3/4”

Rotationally molded with high-impact polyethylene and maximum UV protection. Pebble Beach Textured Finish. (Fits 5’ Bench only)

51-1/2”

part# DF301093

Attaches to Universal Bench, see page 3.

13”

Polyethylene Storage Box 42 qt. dimensions shown.

Molded handles and double-walled lid. Water and dust resistant. Lockable.

39-3/4”

31-1/2”

17”

15”

16-1/2” Overall height

14-1/2”

Standard Box part# L1HYPB

Latch pin with grommet to hold cover shut.

20-1/4”

Medium Box part# L1HYPBL

18 ”

27”

Lock

Latch

41 41

Ladders and Steps Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

3, 4 or 5-Step Metal Ladders

Galvanized or Powder-coated blue. Optional speed release. 5” step. 3-step Galvanized part# DH28273 3-step Powder-coated part# DH27273 4-step Galvanized part# DH28274 4-step Powder-coated part# DH27274 5-step Galvanized part# DH28275 5-step Powder-coated part# DH27275

3-step 49” 4-step 60” 5-step 71” 11” 11”

16”

Straight Ladder

Brackets mount on side or end of Ultra Dock and Classic Dock. Four-step straight ladder has three mounting holes and bolts to bracket at a 10-degree angle. Classic Ultra

part# D1LADAC part# D1LADAU

Judge, Northern Lights, and Floe require Ultra Bracket.

42 42

Classic Bracket Only part# D1LADC1

Optional Galvanized Speed-Release Used with galvanized and blue powder-coated ladders only. Speed-release

Ultra Bracket Only part# D1LADU1

part# DH27271

5”

R oll-A-Dock

V ers-A-Dock

Heavy-Duty All-Aluminum Ladder

Ladder constructed of heavy-duty 1-1/2” square aluminum to resist corrosion. Ladder features 3-1/2” extruded aluminum channel serrated to produce a non-skid surface rung with no sharp edges. Ladder rated 665 lb per rung.

S ectional

F loating Dock

W ave Dock

U ltra Dock

Ladder Mounting Hardware

F U

Hardware for mounting 4 and 6 step ladders. Used with deck thickness up to 2-1/2”.

16-1/4”

part# D1LADM

part# D1LADA4 part# D1LADA42 part# D1LADA6 part# D1LADA62

4 steps 4 steps (2 piece) 6 steps 6 steps (2 piece)

C lassic dock

Aluminum Ladder Hinges

F U

Aluminum hinge allows you to swing ladder to an upright position. (Drilling required in ladder.)

16-1/4”

One pair

17”

part# D1LADH

18-3/8”

10-1/2”

17”

70-1/2”

91”

10-1/2” 70-1/4

18-3/8”

10-1/4”

10-1/2” 10-1/2”

13”

This unique ladder is constructed with 100% highdensity polyethylene. This dock ladder Integrates perfectly with the Wave Armor system. Folds up and out of the water when not in use. Bottom section of ladder floats. part# DF300081

50” 10-1/2”

Wave Armor Ladder W

4”

-3/

19 68”

14-3/4”

10-1/4”

12” 3-1/2” 12”

3-1/2” 22”

43 43

Ladders and Steps Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

1-1/4”

26”

Attachment Bracket

26”

60”

38”

16” Leg 32” 32”

36” 36”

33”

36”

White

Aluminum Dock 5-Step

Heavy-duty aluminum construction provides solid footing. 5-step with 3-1/2” tread step, two hand railings and two 16” legs. Aluminum Dock 5 Step 1-1/4”

44 44

Attachment Bracket

part# D1STEP5

Optional 25” Leg part# D1STEP5L25

Beige

Dock 3-Step with Solid Sides

These all aluminum steps offer a 2” x 5-1/2” powder coated tread, ideal for young children to the elderly. Ensures safe entrance or exit from the water. The step system comes with attachment bracket that fits most docks, two hand railings and two 16” front legs with pads.

Perfect for areas with a rise from the shore to the deck of the dock. Aluminum construction with 36” powder coated stair treads. Top step is 24” tall, longer lengths available.

Dock 4-Step

Dock 4 Step - White Dock 4 Step - Beige Optional 25” Legs

part# D1STEP4 part# D1STEP4B part# D1STEP5L25

Dock 3 step stairs (beige) Dock 3 step with railing (beige) Dock 3 step stairs (white) Dock 3 step with railing (white)

White

part# D1STEP3B part# D1STEP3BWR part# D1STEP3W part# D1STEP3WWR

Beige

R oll-A-Dock

V ers-A-Dock

S ectional

C lassic dock

F loating Dock

U ltra Dock

White

Adjustable Dock to Step Bracket

Beige

Used to mount Hewitt adjustable steps to a deck, seawall side or end of Roll-A-Dock. Custom brackets available for other docks. The adjustable dock step bracket allows for ascending or descending scenarios.

ThruFlow™ GRAY

W ave Dock

WHITE

part# D1STEPDMB-1 (For original style steps)

BEIGE

part# D2STEPDMB (For new style steps)

Classic Step C Optional Non-Adjusting Steps Aluminum Bullnose Step

ThruFlow Bullnose Step

Custom Adjustable Steps Need something unique? Custom designs, custom widths and lengths, custom colors and painted handrailings available. Step tread is 9.6” Optional nonadjusting steps have 2” x 8” side tube. Railing and side rails shown above include custom paint option.

Used to mount Hewitt adjustable steps to side or end of a classic dock. Custom brackets available for other docks. The adjustable dock step bracket allows for ascending or descending scenarios.

Adjustable Steps The All-Terrain staircase is made entirely of corrosion resistant aluminum. All components are ruggedly constructed, yet lightweight, for easy handling and assembly. Stair treads and landings are made from the same high-quality QT powder coated aluminum and ThruFlow™ decking that is available on Hewitt Docks. The baked-on finish provides sure footing even when wet. See dealer for ThruFlow™ decking. 3’ Adjustable steps (3’ to 4-1/2’) 5‘ Adjustable steps (5’ to 7-1/2’) 3‘ Adjustable steps (beige 3’ to 4-1/2’) 5‘ Adjustable steps (beige 5’ to 7-1/2’)

part# D1STEPA3 part# D1STEPA5 part# D1STEPAB3 part# D1STEPAB5

part# D1STEPDMBC-1 (For original style steps) One step with brackets.

part# D2STEPDMBC (For new style steps) One pair - brackets only.

45 45

Harbor Straight Bumper

Piling Bu Heavy Duty Cleat

mooring cleat

Impulse Kayak

dle

Paddle 10’

Impulse

Hand winch

lse Pad

Cruizer

Braking Winch

Paddle Impulse Cruizer

Launch

Post Ratchet

Post winch

Support Pipes

Braking Winch

Post Ratchet

Post winch Hand winch

46 46

Bra

kin

gW inc

part# DF300089

Paddle

ize

Includes foam/neoprene seat cushion.

8’6”

Two-piece, 7’ paddle easily breaks down for storage and transport.

Cru

part# DF300442 part# DF300443

Kayak (blue) Kayak (yellow)

Po st

storage boxes

part# DF300440 part# DF300441

win

Kayak Paddle

Overall Dimensions: 10’L x 32”W x 10”D Cockpit Dimensions: 4’L x 23”W x 6”D 300 lb Weight Capacity 45 lb Kayak Weight

Cooler

storage boxes

Cushion Bumper

dock cleat seat

dock cleat

Cushion Bumper

Overall Dimensions: 8’6”L x 30”W x 15”D Cockpit Dimensions: 4’L x 23”W x 6”D 185 lb Weight Capacity 36 lb Kayak Weight

STRAIGHT BUMPER

Sit-on-top style kayak is comfortable and ultra-stable. Designed for use on lakes or slower moving rivers by paddlers of all abilities. Weatherproof roto-molded polyethylene construction. Adjustable foam seat cushion, rear compartment and molded beverage holder, handles and grips provide added comfort. Available in blue or yellow.

Our basic model made for the beginning paddler. Molded construction features beverage holders, footrests and handles. Spacious cockpit and high-speed hull. High-impact polyethylene provides maximum UV protection and superior stability. Available in blue or yellow.

Kayak (blue) Kayak (yellow)

’

Harbor Straight Bumper

Compact Cleat

mooring cleat

Pro-Guard Storm

Pier Bumper

dock cleat seat

Bolt Screw

Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

Cruizer Kayak

nch

3.5

Fold Cleat

Piling Bumper

Corner Wheel

Small Universal Bumper

Kayaks and Accessories

Lau

R oll-A-Dock

V ers-A-Dock

S ectional

Aluminum Kayak/Canoe Rack

Plastic Kayak Rack

Solid 1-1/2”x1-1/2” aluminum rack stores kayak/canoe with ease. Includes paddle shelf and four loop tension cords.

A sturdy and stylish kayak rack is a great solution for waterfront storage. Features molded-in kayak hook receivers to secure kayak to rack. Attaches to Wave Armor Dock or special brackets available for mounting to truss or wood docks.

One Pair part# D1KR R

33”

43”

Heavy-duty aluminum frame loops to assist with getting in and out of kayaks and canoes. Six adjustable settings. part# D1KLT

W part# D1KLW

U ltra Dock

Universal Kayak Rack

27-1/4”

Universal Kayak Rack part# DF300109 45-1/2” 69” 27-1/4”

45-1/2”

2.77”

69”

6”

1.63”

4.5”

1/2” Bolts are 4” on center.

BRACKET

TENSION CORD

Kayak Launch Loops

W ave Dock

Kayak Rack & Brackets for Truss and Wood Docks part# DF300107K R F Bracket only for Truss and Wood Docks (1) part# DF300107B R

F loating Dock

For Wave Dock part# DF300107 (pair) W

50”

BRACKET FITS 1-1/4” TUBE

C lassic dock

Optional 7’ Guide Bunk part# NABPBP

C part# D1KLC U part# D1KLT (Must also purchase 2-D1BUVDU1 and DUAPR1)

61”

Paddle Board Rack

30-1/2”

F U

1-1/2” x 1-1/2” aluminum frame with 1” x 1” support arms. Arms have heavy-duty rubber sleeve for extra protection.

19” 58” 51”

part# D1PAT Bracket Fits 1-1/4” Tube

47 47

Dock Gates and Mat Rack Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

All-aluminum gate can be mounted to end of dock, gangways or ramps. Special widths available. Includes latch and key.

Security Gate

1-1/2” x 1-1/2” aluminum rack stores your water mat. Includes tension cords and fits dockside tubes up to 1-1/4”

4’ Access Gate

part# DGATEA4

part# D1MAT

6’ Access Gate

part# DGATEA6

Access Gate

4’ Security Gate

part# DGATES4

6’ Security Gate

part# DGATES6

Mat Rack

32”

40”

16”

72”

Bracket Fits 1-1/4” Tube

98”

54”

4’ OR 6’

hewittrad.com 48 48

Tension Cord

Float Tanks and Otter Accessories

Float Tanks

Used to construct a floating dock or raft. Also useful for adding sections to an existing dock. Over 40 different sizes available. “The most important component of your floating dock is the flotation that keeps the dock floating.”

Structural Ribs Top, Bottom, Sides For Extra Strength Heavy Mounting Flanges 1-1/4” To 1-3/4” Thick Stronger Attachment Points

Threaded Vent Plug Prevents Heat Build-up

What you can’t see is vital to the performance of our floating docks! Unarguably the most sought after floats (based on sales volume) in the marina market are from Premier, because they meet ALL of the important design, engineering, manufacturing, shipping, storage and installation standards that give you the best performance and value. One piece molded rotational drum: Foam filled, molded in mounting slots, heavy-duty mounting flanges, air relief vent, 8 year limited warranty (non-prorated).

Molded Mounting Slots Roto-Molder Encasement For 9/16” Wide x 1-1/2” Long – One-Piece Construction – Completely Water Tight; Meets The ASTM Falling Easier Fastening Dart/Puncture Test

EPS Foam Filled Meets The Hunt 7-Day Water Absorption Test Of Less Than 3.0 lbs/cu.ft.

Heavy Nominal Wall Thickness Of .150” Minimum Of .125”

Float Tank Brackets

Brackets for connecting float tanks to a Roll-A-Dock frame. Includes hardware. Part number includes one pair for one float. 4’ Wide 6’ Wide

part# D1FBS42 part# D1FBS62

Lag Bolt Set for wood Attach flotation drums to dock system. 3/8” x 2” galvanized lag bolt 3/8” x 3” galvanized lag bolt 3/8” x 5” galvanized lag bolt 3/8” SS flat washer

part# NB382L part# NB383L part# NB385L part# NW38FL

Model Size (Inches) Series 1248 part# DFT1248-20 12” x 48” x 20” Series 1848 part# DFT1848-36 18” x 48” x 36” Series 2072 part# DFT2072-08 20” x 72” x 8” part# DFT2072-10 20” x 72” x 10” Series 2096 part# DFT2096-10 20” x 96” x 10” Series 2436 part# DFT2436-08 24” x 36” x 8” part# DFT2436-12 24” x 36” x 12” part# DFT2436-16 24” x 36” x 16” part# DFT2436-20 24” x 36” x 20” Series 2448 part# DFT2448-08 24” x 48” x 8” part# DFT2448-12 24” x 48” x 12” part# DFT2448-16 24” x 48” x 16” part# DFT2448-20 24” x 48” x 20” part# DFT2448-24 24” x 48” x 24” part# DFT2448-36 24” x 48” x 36” Series 2472 part# DFT2472-12 24” x 72” x 12” part# DFT2472-16 24” x 72” x 16” Series 2496 part# DFT2496-08 24” x 96” x 8” part# DFT2496-12 24” x 96” x 12” part# DFT2496-16 24” x 96” x 16” part# DFT2496-20 24” x 96” x 20” Series 3048 part# DFT3048-12 30” x 48” x 12” part# DFT3048-16 30” x 48” x 16” Series 3072 part# DFT3072-16 30” x 72” x 16” Series 3242 part# DFT3242-18 32” x 42” x 18” Series 3648 part# DFT3648-08 36” x 48” x 8” part# DFT3648-12 36” x 48” x 12” part# DFT3648-16 36” x 48” x 16” part# DFT3648-18 36” x 48” x 18” part# DFT3648-20 36” x 48” x 20” part# DFT3648-24 36” x 48” x 24” part# DFT3648-32 36” x 48” x 32” Series 3660 part# DFT3660-12 36” x 60” x 12” part# DFT3660-16 36” x 60” x 16” part# DFT3660-20 36” x 60” x 20” Series 3672 part# DFT3672-12 36” x 72” x 12” part# DFT3672-16 36” x 72” x 16” part# DFT3672-20 36” x 72” x 20” part# DFT3672-24 36” x 72” x 24” part# DFT3672-32 36” x 72” x 32” Series 3696 part# DFT3696-12 36” x 96” x 12” part# DFT3696-16 36” x 96” x 16” part# DFT3696-20 36” x 96” x 20” part# DFT3696-24 36” x 96” x 24” part# DFT3696-32 36” x 96” x 32” Series 3878 part# DFT3878-12 38” x 78” x 12” Series 4272 part# DFT4272-12 42” x 72” x 12” part# DFT4272-16 42” x 72” x 16” part# DFT4272-20 42” x 72” x 20” Series 4848 part# DFT4848-12 48” x 48” x 12” part# DFT4848-16 48” x 48” x 16” part# DFT4848-20 48” x 48” x 20” part# DFT4848-24 48” x 48” x 24” part# DFT4848-32 48” x 48” x 32” part# DFT4848-36 48” x 48” x 36” Series 4860 part# DFT4860-12 48” x 60” x 12” part# DFT4860-16 48” x 60” x 16” part# DFT4860-20 48” x 60” x 20” part# DFT4860-24 48” x 60” x 24” part# DFT4860-32 48” x 60” x 32” Series 4872 part# DFT4872-12 48” x 72” x 12” part# DFT4872-16 48” x 72” x 16” part# DFT4872-20 48” x 72” x 20” part# DFT4872-24 48” x 72” x 24” part# DFT4872-28 48” x 72” x 28” part# DFT4872-32 48” x 72” x 32” part# DFT4872-36 48” x 72” x 36” Series 4884 part# DFT4884-12 48” x 84” x 12” part# DFT4884-16 48” x 84” x 16” Series 4896 part# DFT4896-12 48” x 96” x 12” part# DFT4896-16 48” x 96” x 16” part# DFT4896-20 48” x 96” x 20” part# DFT4896-24 48” x 96” x 24” part# DFT4896-32 48” x 96” x 32” Series 48120 part# DFT48120-12 48” x 120” x 12” part# DFT48120-16 48” x 120” x 16” part# DFT48120-20 48” x 120” x 20” Boat Lift Series (All .375 Wall Thickness) part# DFT252 BLAT 26” x 30” x 60” part# DFT183 BLAT 30” x 30” x 90” part# DFT242 BLAT 32” x 40” x 108”

Cu. Ft.

Wt. (lbs)

Float Buoy.

6.7

359

966

6.7 8.3

34 38

360 450

11.1

592

4 6 8 10

21 27 30 33

211 318 436 540

5.3 8 10.7 13.3 16 24

27 33 39 44 50 72

288 433 581 729 866 1297

12 16

44 57

629 796

10.7 16 21.3 26.7

53 64 75 84

562 866 1155 1420

11.3 13.3

33 38

514 712

1051

14.2

790

8 12 16 18 20 24 32

37 45 51 54 62 66 82

429 650 874 990 1088 1280 1644

15 20 25

58 61 74

783 1017 1328

18 24 30 36 48

62 78 87 99 120

999 1313 1638 1951 2553

24 32 40 48 64

90 103 112 132 149

1331 1735 2172 2597 3349

20.6

1133

21 28 35

80 86 98

1166 1555 1934

16 21.3 26.7 32 42.7 48

55 67 77 86 108 114

878 1182 1480 1738 2231 2480

20 26.7 33.3 40 53.3

73 80 92 106 130

1101 1497 1851 2199 2815

24 32 40 48 56 64 72

78 98 111 123 141 154 166

1369 1823 2225 2701 2940 3457 3800

28 37.3

89 105

1510 2056

32 42.7 53.3 64 85.3

109 131 145 163 193

1803 2396 2996 3578 4631

40 53.3 66.7

124 143 177

2118 3020 3692

27 46.9 81.5

85 130 200

1000 2000 3700

A Superior 15-Year Warranty, with the first 8 years 100% non-prorated.

49 49

Otter ATV Trailers • Haul up to 15 Cubic Feet and 1500 Pounds • 10 Year Warranty on Trailer Bed and 1 Year Warranty on Trailer Components

Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

Xpress 15 Trailer

Super Xpress 20 Trailer

Xpress 20 Trailer

• High Clearance Frame with 3/4D Solid Steel Axle • Steel Wheels w/ Integrated Greaseable Roller Bearings • Industry Strongest Roto-Molded Trailer Body • Molded-In Power-Rail Frame • Reinforced Outer Lip For Remarkable Wall Strength • Tilt-N-Swivel Side & Rear Dumping w/ Tipper Latch • Standard Pin Style Hitch Attachment

4-bolt hub assembly with greaseable tapered roller bearings.

• High Clearance Frame with 3/4D Solid Steel Axle • Steel Wheels w/ Integrated Greaseable Roller Bearings • Standard Pin Style Hitch Attachment • Optional 2D Ball Coupler Attachment • Tows Smoothly Behind any ATV / UTV • Molded-In Power-Rail Frame • Reinforced Outer Lip For Remarkable Wall Strength • Tilt-N-Swivel Side & Rear Dumping w/ Tipper Latch

Dimensions: 65L x 36W x 14D Tires: 18 x 7 x 8 Floatation Turf Tires

Dimensions: 65L x 46W x 14D Load Capacity: 1500 lbs Cubic Ft. of Space: 20 ft Tires: 18 x 9.5 x 8 Floatation Turf Tires

Load Capacity: 1500 lbs Cubic Ft. of Space: 15 ft

part# DFA201244

Dimensions: 65L x 46W x 14D Load Capacity: 1500 lbs Tires: 18 x 8.5 x 8 Floatation Turf Tires Cubic Ft. of Space: 20 ft part# DFA201239

part# DFA201234 46’

36’ 14’ 65’

14’

65’

Travel Cover

Bucket Holder

Auger Shield

Protect your gear and your load with a Rhino Xpress 20 Trailer Cover. The heavyweight fabric is extremely durable and waterresistant, with a sewn-in shock cord into the hem to seal out the elements. Designed to fit Xpress 20 Off-Road Trailer.

Constructed of 100% thick, and rugged Roto-Molded Polyethylene. Simply attach this Accessory to your Rhino Rear ATV Box for the simplest way to carry 5 gallon buckets with you during transport. With no tools necessary for installation, you simply need to slide this tank onto the built-in accessory attachment points.

Revolutionary Auger Shield is a full-length ice auger boot that completely encases the auger blade. Constructed of 100% thick and rugged Roto-Molded polyethylene plastic, it protects your expensive gear from being damaged by the sharp, metal edge of your auger blade while protecting the blade itself. A built-in carrying handle makes for easy transport and allows you to conveniently store your shield by hanging it on the wall. Designed for standard length augers. Our Auger Shield fits a 10” auger drill.

part# DFA200847

part# DFA200829

50 50

46’

14’

part# DFA200553

Galvanized Dock Hardware

Dock Hardware Commercial-grade (1/4”) dock hardware is designed for use with 1-1/2” thick lumber (minimum width 6”). All hardware is mounted with 3/8” carriage bolts. All male and female dock to dock connections are made with either 3/4” bolts with lock nuts or 3/4” connecting pins.

Wood Dock Plan Kit will show you the basics on building a lightweight and long-lasting floating dock system.

Inside Corner Back Up Plate

Angle Bracket Outside Corner (Female) Connector Pin

Outside Corner

Chain Retainer

Outside Washer Plate Pipe Holder Roller Assembly

Female “T” Connector and Hex Head Bolt Male “T” Connector Outside Corner “Male”

51 51

Galvanized Dock Hardware Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

Lag Bolt Set

Connector Pin Set “O”

Aluminum Transition Plate

Attach flotation drums to dock system.

For quick disconnect. Used to connect male and female T connectors.

Create a smooth transition between dock sections or seawall.

3/8” x 2” galvanized lag bolt 3/8” x 3” galvanized lag bolt 3/8” x 5” galvanized lag bolt 3/8” SS flat washer

part# NB382L part# NB383L part# NB385L part# NW38FL

part# DH26531

3/4” Connector Pin & Hitch Clip Pin Volume Pack 48 pcs

4’ 6’ 8’ 12’

part# D1TP4 part# D1TP6 part# D1TP8 part# D1TP12

4-15/16”

2-1/12”

3-1/12”

Effective Reach 12”

Carriage Bolt Set Includes bolt, flat washer and nut. 3/8” x 2-1/2” SS Carriage Bolt 3/8” SS Flat Washer 3/8” Brass Nut

part# NB38212C part# NW38FL part# NN38S

1/2” x 3” “M” SS Carriage Bolt 1/2” SS Flat Washer 1/2” Coated Nut

part# NB123C part# NW12FL part# NN12S

3/4” x 3-1/2” “N” SS Hex Bolt 3/4” SS Flat Washer 3/4” Coated Nut

part# NB34312G part# NW34FL part# NN34L

Pipe Holder/ 3” Outside “K”

Heavy-Duty Roller Assembly “T”

Bolts to outside of dock. Use 2” pipe to hold dock in place.

Assist vertical motion of the dock in tidal action areas. 6” roller, 3/8” bracket.

Pipe Holder

HD Roller Assembly “T” Replacement Roller Only

part# DH26411

part# DH26414 part# DH48939

Volume Pack 24 pcs 3” ID 10.5”

7”

5” 6”

52 52

2”

Heavy-Duty Aluminum Transition Plate

Inside Corner “D”

Inside Rolling Ramp Bracket

With replaceable wear guard.

Heavy-duty inside corner should be used with an outside corner.

Includes left and right ramp brackets. 5”x11” x 1/4”

Inside Corner “D” part# DH26403

Inside Rolling Ramp Bracket part# DH26431

Volume Pack 32 pcs

Replacement Roller Only part# DH48939

4’ 5’ 6’ 8’

part# D1TPHD4 part# D1TPHD5 part# D1TPHD6 part# D1TPHD8

24”

Weld hinge to your ramp/gangway, dock or seawall. part # ADD-00114

8-1/4”

1/2” x 5” SS Hex Bolt part # NB125G 1/2” Coated Hex Lock Nut part #NN12L (Three are used on each plate.)

5”

11”

6”

5”

11”

Outside Corner End “C” Use at ends of fingers and docks. Ideal for swim floats. Each Leg Is 10”L x 5”H. Outside Corner End “C”

part# DH26402

Inside Corner/ 3” Pipe holder “E”

Inside Corner/ 2” Pipe holder “E”

Use with one of the outside corners and as an internal pipe holder for dock frame strength.

8-1/2”L x 5”H.

3” Pipe Holder ”E” Volume Pack 16 pcs

part# DH26404

2” Pipe Holder ”E” 2” or 3” ID

Volume Pack 16 pcs

part# DH26405 2” or 3” ID

10”

5” 8-1/2”

8-1/2”

53 53

Galvanized Dock Hardware Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

Chain Retainer “J”

Female T Connector “G”

Use weights and chains to hold dock in place. Accommodates 1/4”, 3/8”, & 1/2” Chain. 5”L x 5”H.

Two welded 1/2” tabs. Bolts to side of dock to attach fingers and ramps. Female T Connector “G” part# DH26407

Chain Retainer “J” part# DH26410

Volume Pack 24 pcs

Volume Pack 24 pcs 5”

5”

5” 5”

1-1/4” gap

Washer Plate “I”

Outside Corner (Male) “B”

Cleat Angle

Use two washer plates with each angle.

1/2” welded tab. Use with a female outside corner to connect docks end to end.

Slots accommodate various cleat sizes.

Washer Plate part# DH26409

Each leg 10”L x 5” H. Outside Corner (Male) “B” part# DH25491

Volume Pack 48 pcs

Volume Pack 24 pcs

10”

Cleat Angle part# DH26422 Volume Pack 48 pcs

5”

2.75”

10”

5”

5” .563”x2”

1-1/2”

54 54

.563”x1.625x2”

Male T Connector “H”

Angle “F”

Outside Corner (Female) “A”

Welded 1/2” Tab. Use with female T connector to attach fingers and ramps.

Heavy-Duty angle for cross supports.

Two 1/2” welded tabs. Use with a male outside corner.

Angle “F” part# DH26406

Male T Connector “H” part# DH26408

Each Leg 10”L x 5”H. Outside Corner (Female) “A” part# DH26400

Volume Pack 48 pcs

Volume Pack 24 pcs

2-5/8”

10” 5” 5”

5”

10”

5”

1-1/4” gap

.438” x 4

Back-Up Plates “Q”

Dock Packages

Use 5”x 5” reinforcing plates to back up Single T Males and Females.

Dock planning made easy with our Dock Hardware Planning Guides.

3’x20’ Wood Finger Dock

Dock Hardware Planning Guide in PDF format available for download at glmarineproducts.com.

Back-Up Plate “Q” part# DH26413

PDF Planning Guides • 10’x20’ Wood Main Dock • 8’x20’ Wood Main Dock • 4’x20’ Wood Main Dock • 6’x20’ Wood Main Dock • Typical U-Dock • 3’x20’ Wood Finger Dock • 12’x12’ Wood Swim Float • 10’x10’ Wood Swim Float • Main Dock Decking

Volume Pack 40 pcs

5”

8’x20’ Wood Main Dock

10’x20’ Wood Main Dock

55 55

Piling Rings and Caps Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

14” Interior Pile Guide 14” clearance for square or round pile. Guide with four rollers. 14” Interior Pile Guide part# DH26434 Volume Pack 12 pcs

24”

3.75”

14” 7.94”

Piling Rings with Four Rollers and Removable End 8” Dock pile ring (10” opening) part# DABPR8 Volume Pack 12 pcs 10” Dock pile ring (12” opening) part# DABPR10 Volume Pack 12 pcs 12” Dock pile ring (14” opening) part# DABPR12 Volume Pack 12 pcs

56 56

Custom Dock pile ring (made to your size) part# DABPR 10”-12” Ring

Opening Dimension

8” Ring

Piling Caps

Keep birds from roosting in your pilings. Mildew inhibitors and UV stabilized. Available in white or black.

Flat Piling Cap

Black 6.5” Flat White 7” Flat Black 7” Flat White 7.5” Flat Black 7.5” Flat White 8” Flat Black 8” Flat White 9” Flat Black 9” Flat White 10” Flat Black 10” Flat White 10.5” Flat Black 10.5” Flat White 11” Flat Black 11” Flat White 12” Flat Black 12” Flat

Cone Piling Cap

part# FPC65B part# FPC7W part# FPC7B part# FPC75W part# FPC75B part# FPC8W part# FPC8B part# FPC9W part# FPC9B part# FPC10W part# FPC10B part# FPC105W part# FPC105B part# FPC11W part# FPC11B part# FPC12W part# FPC12B

part# CPC7W part# CPC7B part# CPC75W part# CPC75B part# CPC8W part# CPC8B part# CPC85W part# CPC85B part# CPC9W part# CPC9B part# CPC95W part# CPC95B part# CPC10W part# CPC10B part# CPC105W part# CPC105B part# CPC11W

White 7.0” Cone Black 7.0” Cone White 7.5” Cone Black 7.5” Cone White 8.0” Cone Black 8.0” Cone White 8.5” Cone Black 8.5” Cone White 9.0” Cone Black 9.0” Cone White 9.5” Cone Black 9.5” Cone White 10.0” Cone Black 10.0” Cone White 10.5” Cone Black 10.5” Cone White 11.0” Cone

Black 11.0” Cone White 11.5” Cone Black 11.5” Cone White 12.0” Cone Black 12.0” Cone

12” Piling Hoop with Roller and Removable End

13” Piling Hoop with Roller and Removable End

Make vertical movement easier in areas with wind, current or tides. For pilings up to 12” in diameter.

13”x13” Pile hoop with roller and removable end for up to 12” pile.

12” Piling Hoop and Roller Assembly

part# DH26415

part# CPC11B part# CPC115W part# CPC115B part# CPC12W part# CPC12B

part# DH26423

Volume Pack 12 pcs

22”

22.5”

4-1/4”

6” 12” 4”

4” 14-1/4”

20.25”

57 57

Lift Bumpers, Full-Length Guides and Motor Stop Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

Hydraulic Motor Stop

24”and 36” Plastic Bumpers High-strength polyethylene plastic formulated with UV protection for the marine environment. Mount to square poles with recessed mounting holes. Colors: White, Black, Green, Tan, Light Gray. Volume Pack 24 pcs 24” Bumpers 2” slot-White 2” slot-Black 3-1/2” slot-White 3-1/2” slot-Black 3-1/2” slot-Light Gray

part# D1BUVP24W part# D1BUVP24B part# D1BUVP243W part# D1BUVP243B part# D1BUVP243GYL

Single Motor 4,400-10,100 Double Motor 4,000-10,100 Large Double Motor 12,100-24,100 24”

36” Bumpers 2” slot-White part# D1BUVP2W 2” slot-Black part# D1BUVP2B 2” slot-Green part# D1BUVP2G 2” slot-Tan part# D1BUVP2TN 2” slot-LightGray part# D1BUVP2BGYL 2-1/2” slot-White part# D1BUVP212W 2-1/2” slot-Black part# D1BUVP212B 2-1/2” slot-Light Gray part# D1BUVP212GYL (Mounted to 2x2 tube. Requires 2 bolts, 2 nuts and 4 washers per bumper) 3/8” x 3-1/2” SS Hex Bolt part# NB38312G used with tube thickness up to 2” 1/2” Bolt 3/8” Brass Nut part# NN38S length through 3/8” SS Flat Washer part# NW38FL bumper 36” Bumpers 3-1/2” slot-White part# D1BUVP3W 3-1/2” slot-Black part# D1BUVP3B 1/2” Bolt (Mounted to 3x3 tube. Requires 2 bolts, 2 nuts and 4 washers per bumper) length through bumper part# NB38412G 3/8” x 4-1/2” SS Hex Bolt used with tube thickness up to 3” 3/8” Brass Nut part# NN38S 3/8” SS Flat Washer part# NW38FL 1/2” Bolt length through bumper

58 58

X36” Bumpers X36” Plastic with 3-1/2” Slot-White part# D1BUVP312W X36” Plastic with 3-1/2” Slot-Black part# D1BUVP312B (Mounted to 3x3 tube. Requires 2 bolts, 2 nuts and 4 washers per bumper) part# NB386G 3/8” x 6” Bolt 2-1/8” Bolt length used with tube thickness up to 3” through 3/8” Brass Nut part# NN38S bumper 3/8” SS Flat Washer part# NW38FL

24”

This design fits new rubber bunks. Carriage bolts slide into track on outside of bottom bunk and plates are attached on the outside. There are two hole patterns on the plate for height adjustment. The extensions are 24” long for length adjustment and then finished off with a 36” plastic bumper. Motor stop for older lifts available. part# LMSHYS part# LMSHYD part# LMSHYD2

20” of Adjustment

36”

Motor Stop

Protect your motor from overrunning the lift. For cantilever and vertical lifts part# LMS Small Large Adjustable part# LMSL For Proteus Lift

part# LMSP

2”

Bow Stop

Bow stops are used for rough water or outdrive ski boats to keep boat from overrunning the lift. Standard Stop for cantilever and vetical lifts part# LBS

36”

LBS

Large Bow Stop for 4600-6600 part# LBSHD

2” 3/4” 4-1/2”

Bow Stop for Proteus lift part# LBSHD Drilling required

2-1/2”

24” 2” 3/4”

LBSHD

4-1/2”

2”

3/4” 4-1/2”

3-1/2” 3-1/2” 3/4” 4-1/2”

Foam Post Bumper

Hydraulic Bow Stop

3-1/2”

This design fits new rubber bunks. 11’ custom extrusion slides into the bottom bunk with 8’ of adjustment inside the bunk and is secured with two 1/2” set screws. Bow stop for older lifts available. Hydraulic Stop 2,500-10,100 part# LBSHY

36”

Bumper slides over 1-1/2” OD pipe and also serves as replacement foam for centering guides.

1-1/2” 4”

part# D1BUF 26-1/4”

Various shapes and sizes of aluminum are available for sale. Contact your local dealer for details.

Boat Port Side Walk Brackets Bolts onto Boat Port cross-beams to create a side walkway. (Planks not included.)

14’ Carpeted Pontoon Guides

Carpeted 12’ Standard for 1800 - 5200 part# LFLCG 14’ Standard for 1800 - 5200 part# LFLCG14 (Standard also fits hydraulic 4400-8100) 12’ Medium for 1600 - 3800 part# LFLCGH 14’ Medium for 1600 - 3800 part# LFLCGH14 12’ 4600 for 4600 HL part# LFLCG46 14’ 4600 for 4600 HL part# LFLCG4614 12’ Large for 5600 - 6600 HL part# LFLCGHL 14’ Large for 5600 - 6600 HL part# LFLCGHL14

Standard 1800 - 5200 part# LFLCGCP14 (Standard also fits hydraulic 4400-8100) Medium 1600 - 3800 part# LFLCGCH14 4600 4600 part#LFLCGCP46 Large 5600 - 6600 part# LFLCGCPL14

Full-length guide steps aid in guiding your boat into the same position every time. Vertical and horizontal adjustment support for getting in and out of your boat.

One Bracket part# LBPWB 2- tank lift uses 4 brackets per side 3- tank lift uses 5 brackets per side

Full-Length Guide Step

16” Max

Boat Port Front Walk Brackets

30” Support with four 14’ carpeted bunks to help guide your pontoon into the lift.

Bolts onto front of Boat Port to create a side walkway. One needed per side. (Planks not included.) One Bracket part# LBPWBF

16” Max

Aluminum Guide Step

Aluminum guide step is 13’ 6” and carpeted 2” x 6” bunk is 14’. Aluminum guide step has pre-drilled holes. Bunk attached by six 3/8” lag bolts. The top flat of the guide step extension slides in from end. The top flat is drilled and tapped for quick adjustment. Standard 1800 - 5200 part#LFLAG (Standard also fits 4400-8100) Medium 1600 - 3800 part#LFLAGH 4600 4600 part#LFLAGH46 Large 5600 - 6600 part#LFLAGHL

Hydraulic Full-Length Outriggers

Allows you to install guides onto hydraulic lifts. Keep in mind, two pair are needed – one pair for each side of lift. One pair 2,500-8,100 part# LFLCGHYB

59 59

Universal Bumper Post winch Small Universal Bumper

Centering Guides and Catwalk

Corner Bumper

dock cleat seat

Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

Various shapes and sizes of aluminum are available for sale. Contact your local dealer for details.

Post Ratchet Piling Bumper

Cushion Bumper

Heavy-Duty Centering Guides mooring cleat

Upper and lower lip wrap around the lift post. Waffle effect backside for additional cushioning. Marine-grade PVC. Colors: White, Black, Blue, Light Gray storage boxes White Black Blue Light Gray

part# D1BCBWE part# D1BCBBK part# D1BCBBE part# D1BCBGYL

(8 fasteners recommended per bumper, see page 8.) Volume Pack 24 pcs

30” Plastic Pontoon Guides for Cantilever Lifts and PWC Lifts These guides feature shock absorbing rubber bushings at the base and durable 24” plastic bumpers to help guide your pontoon boat into the lift. White

part#LCGBPP

The name says it all. Our heavy-duty centering guides feature shock absorbing springs at the base and durable plastic bumpers that won’t mar your boat’s finish. Fits tubes up to 3-3/4” w x 8” h.

36”

5-3/4” Cushion Bumper

Harbor Straight Bumper

4400-10,100 12,100-18,100

part# LCGBHD part# LCGBHDL (Adds 24” to height)

2” 3-3/4”

36” Plastic Centering Guides These guides feature shock absorbing rubber bushings at the base and durable plastic bumpers. Standard fits up to 3” wide by 3” tall beds part# LCGBP Hi-Lifter fits up to 3” wide by 5” tall beds up to 4,500 lbs. part# LCGBPHL For Proteus lift part# LCGBPPO

60 60

Truss Bumper

70”

4-1/2”

87”

36”

Narrow Pontoon Guide Roller This guide bolts onto a 3” tube. Roller aids in guiding boat onto lift. One pair

part# LNPGR

Narrow Pontoon Front Stop

Catwalk

Stop pontoon from overrunning lift. One pair part# LNPFS

12”

16-1/2”

All aluminum brackets with mounting hardware, to make side mounted catwalk for cantilever, vertical and hydraulic lifts with canopy or free standing canopies (planks not included). One Pair for Cantilever Lift part# LCWB

3”

One Pair for Hi-Lift Verticals (drilling required) part# LCWBHL

13”

Narrow Pontoon Stabilizer Bars Get more stability out of your narrow pontoon lift with these stabilizer bars. All aluminum with hardware. One pair part# LNPSB

61 61

Pontoon Conversions and Accessories Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

Pontoon Rack Kit

Convert your regular lift into a pontoon lift with these heavy-duty aluminum brackets and hardware. Rack lifts under the boat’s deck, adds life to the boat’s tanks. Also useful as a landing guide to center your boat over the lift. There are two different rack styles, (shown at left) pontoon rack with wood, (shown at right) aluminum adjustable rack kit Standard Rack Kit: 1800 Wide, 2400-5200 Cantilever Medium Rack Kit: 1800 Roll-A-Rail, 1600-3800 Hi-Lifter 4600 Rack Kit: 4600 Hi-Lifter Large Rack Kit: 5600HL, 6600HL Proteus Rack Kit:

Wood Bunks part# LNPRKS part# LNPRKM part# LNPRK46 part# LNPRKL part# LNPRKP

Aluminum Rack part#LNPRKAS part#LNPRKAM part#LNPRKA46 part#LNPRKAL part#LNPRKAP

43”

Adjustable from 26-1/2” to 29”

ADJUSTABLE RACK KIT OPTION

Optional Guide Rollers For Adjustable Aluminum Rack Kit Roller aids in guiding boat onto lift. One pair part# LNPGR

62 62

* Aluminum adjustable rack kit works on tritoons.

Various shapes and sizes of aluminum are available for sale. Contact your local dealer for details.

Vinyl Pontoon Bed

One set 1800-5200 Cantilevers 1600-3800 Hi-Lifter 4600-6600 Hi-LIfter Proteus

Twin Tube part# LNPCVB part# LNPCVBH part# NA part# LNPCVBP

Triple Tube part# LNPCVB1/2 part# LNPCVBH1/2 part#LNPCVBHL1/2 part# LNPCVBP1/2

Carpeted Pontoon Wood Bed

Twin Tube part# LNPCWB part# LNPCWBH part# NA part# LNPCWBP

Triple Tube part# LNPCWB1/2 part# LNPCWBH1/2 part# LNPCWBHL1/2 part# LNPCWBP1/2

Convert your regular lift into a pontoon lift using the 14’ vinyl bunks, to be installed in a “V” shape. This vinyl bed fully cradles your pontoons.

Convert your regular lift into a pontoon lift using the 14’ carpeted bunks, to be installed in a “V” shape. This wood bed fully cradles your pontoons.

One set 1800-5200 Cantilevers 1600-3800 Hi-Lifter 4600-6600 Hi-LIfter Proteus

hewittrad.com 63 63

Bunks and Bunk Treads Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

Trailer Jack Stand Donut

Replacement Carpet

Keep your trailer jack from sinking into the ground or moving.

Heavy-duty all-weather carpet with thick backing is designed to replace worn and frayed bunks. The marine-grade carpet will not rot or mildew. UV fade and fray resistant. One of the strongest on the market!

Marine-grade PVC. Trailer Jack Stand Donut part# D1BJD

Weight: 14 oz. per square yard Material: Interlocked Polypropylene Fibers Backing: 10 oz. Marine Back 11” x 30’ 16” x 30’ 20” x 30’ 26” x 30’

for two 14’ for two 14’ for two 14’ for two 14’

1” x 4” 2” x 6” guides 2” x 10”

part# LCARPETV part# LCARPETB part# LCARPETG part# LCARPETBL

Bunk Glide On Slide easily on or off. Self Centering and constructed with enhanced PVC. For painted, fiberglass or aluminum boats. Fits Standard bunk boards. (Includes mounting screws.) 2”x6” - Four 13” end caps, Four 36” middles part# D1BG26WE White 2” x 6” Glide On part# D1BG26BK Black 2” x 6” Glide On 2”x4” - Four 50” pieces White 2” x 4” Glide On Black 2” x 4” Glide On

Bunk Treads Make sliding on or off easy. Treads screw directly onto carpeted bunk boards. Screws Included.

part# D1BG24WE part# D1BG24BK

Fits 2” x 6” or 2” x 4” standard bunk boards. 10 pcs 3” x 16” Treads part# D1BBT

6”

64 64

4”

Various shapes and sizes of aluminum are available for sale. Contact your local dealer for details.

PWC Bunk Upgrade

Aluminum Tube with extruded non-scratch plastic glides with UV protection. Sold as 1. 2” x 4” x 84” for 1150, 2300 PWC part# NAM0916 2” x 4” x 72” for 1100HL part# L1PWB11

Aluminum Rubber Bunks

All aluminum 3-1/4” x 3-1/4” bunk with an extruded ribbed rubber surface. Bunks sold in pairs (2). Length Part # 12’ LBAR12 14’ LBAR14

Bunk Spacer

A Bunk Spacer will be used on Aluminum bunk PWC lifts and also pontoons with an elliptical pontoon. Adds 2-1/2” of height. part# LBSK212

Aluminum V-Bunk

Solid 3” x 3” aluminum tube with a carpeted, pressure treated bunk or 3-1/4” x 3-1/4” alumium with rubber bunk used on all outdrive ski boats. Bunks sold in pairs (2). Length 12’ Standard 1800 Wide - 5200 Cantilever 14’ Standard 1800 Wide - 5200 Cantilever 12’ Medium 1800, 1600 - 4600 HL 14’ Medium 1800, 1600 - 4600 HL 12’ Large 5600 - 6600 HL 14’ Large 5600 - 6600 HL

Wood Part # LVBA LVBA14 LVBAH LVBAH14 LVBAHL LVBAHL14

Rubber Part # LVBAR12 LVBAR14 LVBARH12 LVBARH14 LVBARHL12 LVBARHL14

Carpeted Full-Length Bunks

Full-Length Bunks are made from pressure treated lumber and covered with premium grade marine carpeting. Carpeting is highly resistant to mildew and rot. Bunks sold in pairs (2). Size Length 2” x 6” 12’ 2” x 6” 14’ 2” x 10” 12’ 2” x 10” 14’

Part # LFLB12 LFLB14 LFLBL12 LFLBL14

Shown with rubber.

Shown with wood.

65 65

Lift Legs and Extensions Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

3”x3” Adjustable Screw Leg

Leveling Legs

A variety of lengths of leveling legs are available to assure level lift installation in deep water or on an uneven lake or river bed. 18” long 1-1/2” x 1-1/2” sq. 30” long 1-1/2” x 1-1/2” sq. 36” long 1-1/2” x 1-1/2” sq. 60” long 1-1/2” x 1-1/2” sq. 36” long 2” x 2” sq. 72” long 2” x 2” sq. 96” long 2” x 2” sq. 36” long 3” x 3” sq. 72” long 3” x 3” sq. 96” long 3” x 3” sq. 30” long 2-5/8” x 2-5/8” sq. 72” long 2-5/8” x 2-5/8” sq. 96” long 2-5/8” x 2-5/8” sq. 84” long 3” x 3” sq.

Have fluctuating water? Adjustable screw legs mount on the outside of lift and operate with a simple cordless drill. 15.5” of total adjustment. Features patent-pending brake and stop bolt. Fits Cantilever Lifts 30004800lbs. Back only of 3900-5200. Optional screw drive bit available.

part# LL182 – for 1150 and 2300 PWC part# LLH3 – for Narrow Pontoon Lifts part# LL132 – for 1150 and 2300 PWC part# LL152 part# LL232 part# LL262 part# LL282 part# LL332 part# LL362 part# LL382 part# LLH32 part# LLH62 part# LLH82 part# LLH72

3’ x 3’

3” 8-1/2”

part# LLSA

Hi-Lifter Adjustable Screw Leg

Replaces existing leveling leg. The Hi-lifter adjustable screw legs mount on the outside of lift and operate with a simple cordless drill. 15.5” of total adjustment. Features patent-pending brake and stop bolt. Fits Hi-Lifts 2600-6600lbs.

Leveling Legs Extensions

Add onto existing leveling legs without buying a whole new leg. 2” x 2” 3” x 3”

part# LL2E part# LL3E

2-5/8” Legs without exchange part# LLSAHL 2-5/8” Legs with exchange part# LLSAHLX

10”

12”

Leg Pins and Setscrew for Leveling Legs

For quick and easy height adjustments to leveling legs. 1/2” x 1” setscrew 1/2” x 2” setscrew 2-1/2” leg pin with clip 3-1/2” leg pin with clip 4” leg pin with clip 4-1/2” leg pin with clip

Adjustable Screw Leg Option

part# LLSS part# LLSS2 part# LLP2/2 part# LLP3/2 part# LLP4 part# LLP4/2

Optional screw drive bit for adjustable screw legs. Does not work on classic dock screw legs. part# LLSAB Hewitt rubber caps are tough and very durable. They help cover sharp edges and fit snug to ensure they stay in place. This rubber material has a UV inhibitor to protect it from the elements.

Square Rubber Caps

Large Aluminum Pad

23-1/2”

Gives leveling legs greater support in soft or sandy lake bottoms. Installs to bottom of existing pad. Drilling required for installation.

66 66

part# LLPAD

17”

Volume Pack 100 pcs 1-1/2” square D1RC1SQ 2” square D1RC2SQ 3” square D1RC3SQ 2” x 4” square LRARC

Square Plastic Hole Plugs

Volume Pack 100 pcs 1-1/2” square 1-1/4” D1PC1SQ 2” square 1-3/4” D1PC2SQ 3” square 2-3/4” D1PC3SQ

Rubber Post Plug 2” square 1-3/4”

LCGBPLUG

Tie-Downs and Augers

Tie-Down

Leveling Leg Bracing

Personal watercraft and small boat mooring made easy. Simply screw in. Removable handle stows inside anchor tube.

Used to stabilize long leveling legs. Price includes parts for two legs. 2” x 2” for 1800 Cantilever 2” x 3” for 2400 Cantilever 3” x 3” for 3000-4800 Cantilever 2-5/8” x 3” for 2600-6600 Hi-Lifter 4100, 6100, Hydraulic 8100, 10100, 12,100 Hydraulic

Tie-Down Kit

Includes 15’ anchor line, float and nylon carry bag. The original “Beach Security Anchor” from Tie Down. Ideal for mooring personal watercraft or small boats. Screws in easily. Removable handle stows inside anchor tube. part# L1TDK

part# LL2BR part# LL2BR24 part# LL3BR part# LLHBR part# LLHYBR part# LLHYBR8

part# L1TD

High-Wind Tie-Down

Extra anchoring for your boat lift in rough or high-wind areas. Attaches to any rectangle or square tube up to 3”x3”. Includes hardware, adjustable bracket, screw auger and two 5’ aluminum posts. High-Wind Tie Down Kit (2) part# LLTD

7-1/2”

Drilling required on hydraulic lifts

Post Ratchet

F W U

Provides leverage to easily install and remove pipes with augers. This 19” handle and reversible ratchet fits 1-1/4”, 1-1/2’, and 2” pipes up to 2-1/4” O.D. part# DAPR

67 67

Lift Wheels Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

Corner Assist Wheel Kit Makes lift installation and removal much easier: they’re quick to set up, lightweight, easy-to-use, and may be used on several lift sizes without permanent attachment. 1200-1800 Cantilever part# LWCS 2400-5200 Cantilever part# LWCL Cantilever

1100-1600 Hi-Lifters (with welded plastic slide) part# LWCH

Hi-Lifter with Plastic Slides

Hi-Lifter with Rollers

Hydraulic

4100-10100 Hydraulic (Bracket slides over leveling leg) part# LWCHY 2600-6600 Hi-LIfters (with rollers and bolt-on corner slides) part# LWCHL

Lift Ease Boatlift adjustable screw wheel kit features a full-length mounting extrusion and is attached to the lift in two locations. Built-in tire brake helps avoid tire rotation when the wheel is not touching the ground. 20-1/2” of adjustment. 27” wheel standard, optional 16” wheel available. part# LWKE

Simple cordless drill operation. Unmatched heavy-duty design and user-friendly features.

Stainless-Steel Rod Nylon Nut Brake Pad (Patent Pending)

Exchange 27” wheel for 16” wheel. part# DWHEELSX

39” Support Flange for Superior Strength and Support

• Screw legs are completely rebuildable to make fixes easy if needed • Built-in extension-stop prevents the leg from being overextended • Features stainless-steel rod and maintenance-free nylon nut • Patent-pending brake pad prevents the leg from self adjusting due to wave action

Screw Upright with PatentPending Brake and Stop Bolt

Back

68 68

Built-In Extension Stop

Adjustable Screw Drive Bit Fits all screw legs except the classic dock screw legs. part# LLSAB

Lift Wheel Kit

Lift Jack

Transportation Bar

Mounts on center of lift. Works great for maneuvering around objects or over sea walls.

The “Original” lift jack allows you to raise one end of the lift to easily adjust lift legs and assist with installing/removing lift wheels without going under water. Lift jack handle is 36”.

Use a boat to move lift in and out of deep water or to a new location.

For cantilever lifts For narrow pontoon lifts

part# LWK part# LWKNP

Lift Jack (with non-braking winch)

part# LWJ

Lift Jack (with braking winch)

part# LWJB

part# LWTRAN

hewittrad.com 69 69

Roll-A-Rail Accessories Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

Rail Cross Bar Clamps onto bottom side of rail track. All aluminum cross bar with adjustable 3’ legs and pads. Recommended 4500 lb rail to be supported every 8’ if track leaves the ground and 6500 lb rail to be supported every 4’. The 5’ cross bar is used to support rail up to 4’ above ground level. In instances that the elevation is above 4’, use the 8’ cross bar for support. 5’ 5’ 8’

4500 lb 6500 lb 6500 lb

part# LRAL part# LRALL part# LRALL8

Rail Cable Guides

Mechanical Limit Switch

Polyethylene guide prevents wear on braces when the degree or slope of land changes.

Mechanical spring driven limit switch prevents you from overlifting your boat on lift. AC/DC Models with remote ONLY!

2 pieces

part# LWHDDSS

part# LRACG

Braking Winch

Rail Tip-Up Pivoting rail section allows garage or boathouse door to close completely. part# LRTUP

26-1/4”

6-1/4”

Used on rail if incline is greater than 10° (1.6’ in 16’ elevations). (Standard on 6500.) part# LRMSB

70 70

Lift Accessories

Hydraulic Pump Box Stands Mounts over 3” x 3” square tube and keeps your hydraulic pump off your dock and out of the way. Medium Pump Box

part# L1HYPBM (currently what pumps are in)

Cylinder Sleeves

Hydraulic Hose Extension Kit

Dress-up vinyl sleeve for cylinders on hydraulic cantilever lifts. Available in seven colors: gray, beige, blue, white, green, yellow and teal. Also available in SeaMark fabric.

Hoses make it quick and easy to move your pump box away from lift or into a boathouse. Comes with two hoses.

part# LHYCS - Color (pair)

Kit Fits 2500 - 8100lb lifts. 19’ extension part# NAHYHE22 Large Kit Fits 10100 - 24100lb lifts. 19’ extension part# NAHYHEL22 Large Kit

Replacement Key Fob COMMANDER (top) LIFT BOSS LIFT BOSS replacement battery GEN3 Remote

Standard

Lift Boss

GEN3

part# LWHDDK part# LWHDDF part# LWHYRBCC part# LWHDDK3

71 71

SLX Wave Port Attachments and Accessories Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

SLX Z-bracket Attachment Kit Secures port to a fixed dock or sea wall. 2” Kit part# DF301281 4” Kit part# DF301282

Telescoping Port to Fixed Dock Kit 2” kit adjusts from 16” to 24”. (Two Ports) part# DF301434

72 72

SLX Port to Port Attachment

SLX Snap-In Cap

SLX Buoyancy Booster

Connects a pair or multiple ports side-by-side.

Cover unused mounting pockets.

Installs in the rear pockets, adds additional flotation to the rear of the port, decreasing the rearward pitch for heavier crafts.

part# DF300046

part# DF300116

part# DF300498

SLX Post Extension Attachment

SLX Bushing

Moves poles outside, increasing the distance between the two posts, allowing more room for larger PWCs.

Raised and flat reducer bushing. Raised design increases friction on post mount applications. 2”=2 1/2” ID. 4”=4 11/16” ID.

2”Kit part# DF300095 4” Kit part# DF300096

SLX Port to Other Floating Dock Brands Hinge Attachment Kits lock into dock C-channels. 19-3/4 part# DF301308 25-3/4 part# DF301309

2” Raised part# DF302202

4” Flat part# DF301525

SLX Port to Wave Dock

SLX Side Extension

part# DF301915

Adds 22” to one side. part# DF300115 Must purchase one port-to-port to attach side extension. part# DF300046

73 73

Apex Wave Port Attachments And Accessories Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

Apex Port to Port Attachment

Apex Buoyancy Booster

Apex Post Extension Attachment

Apex Snap-In Cap

Connects a pair or multiple ports side-by-side.

Installs in the rear pockets, adds additional flotation to the rear of the port, decreasing the rearward pitch for heavier crafts.

Moves poles outside, increasing the distance between the two posts, allowing more room for larger PWCs.

Cover unused mounting pockets.

part# DF300046

part# DF300498

2”Kit part# DF300095

part# DF300116

4” Kit part# DF300096

Apex Bushing

Apex Telescoping Port to Fixed Dock Kit

Apex to Floating Dock Kit

Raised and flat reducer bushing. Raised design increases friction on post mount applications. 2”=2 1/2” ID. 4”=4 11/16” ID.

2” kit adjusts from 16” to 24”. (Two Ports)

These heavy-duty C-Channel brackets allow for direct mount to a floating structure.

part# DF301434

part# DF301360

2” Raised part# DF302202

4” Flat part# DF301525

Apex Side Extension

Apex to Wave Dock Kit

Z-bracket Attachment Kit

Apex Bolt-In Caps

Adds 22” to one side.

This receiver bracket slides directly in the H-beam channel of the Wave Dock system.

Secures port to a fixed dock or sea wall.

Finish the look with these bolt-in caps for a sleek finish. (2)

part# DF300115 Must purchase one port-to-port to attach side extension. part# DF300046

74 74

part# DF301347

2” Kit part# DF301281 4” Kit part# DF301282

part# DF301514

Genesis and Extreme Wave Port Attachments and Accessories

Genesis to Floating Dock Attachment Kit part# DF301857

Extreme Pipe Sleeves 2” part# DF301746 3” part# DF301747 4” part# DF301748

Extreme Front Plug Kit (2) part# DF301749

Genesis and Extreme Buoyancy Booster Designed to fit underneath the entrance sections of the EVO7 and SLX10 series. Each booster delivers an extra 150 lbs of flotation. part# DF301823

Extreme Pipe Mount to Fixed Dock 2” (24” - 42”) part# DF301409 4” (24” - 42”) part# DF301410 2” Raised part# DF301411 4” Raised part# DF301412

Extreme Floating Dock Kit part# DF301329

Extreme Direct Connect to Wave Dock part# DF301346

75 75

Winches and Wheels Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

Winch Top Cover

Protect your winch from the elements with a winch cover. Hewitt 1501-2001 Winch Top Cover part# LWHWC

Braking Winches: Replacement or upgrade. These braking winches have a completely enclosed gear box with a large cable spool. Crank one way to go up, crank the other way to go down. Stop in any position without flipping a lever. B-1200 B-1500 B-2500

Gear Ratio 4:1 Gear Ratio 6:1 Gear Ratio 12:1

part# LWB12 part# LWB15 part# LWB25

Hewitt 2501 Winch Top Cover part# LWHWC25

Hewitt Chain Driven Winch

This chain driven, gear reduced,self-braking winch has an all aluminum casing that lets you raise and lower your boat with ease. 1501: 15 to 1 ratio 2001: 20 to 1 ratio 2501: 25 to 1 ratio

part# LWHW15 part# LWHW20 part# LWHW25

Double Pulley Conversion Kit

For 3000 lb lift. Converts lift to 3600 lb capacity. part# L1PCO

Crank Handle & Large Wheel

For less fatiguing manual winch operation. For DL, B1200, B1500, B2500, 1501, 2001, 2501 winches. Crank handle 40” Aluminum wheel Spinner knob with hardware

Winch Gear Cover

For Hewitt 1501-2501 winch.

Hand Winch

This is a non-braking winch with a one-way ratchet system. B-1100 Gear Ratio 3.9:1 Crank handle

part# LWHWGC

part# DWINCH part# D304016 4”

4”

76 76

Winch Arm Extensions

Length 18” (2-5/8” x 2-5/8”) For Model 2600 HL - 4600 HL 3,000-4,200 part# NAMWEXT18

part# LWWCH part# LWWL part# LKNOB

Solar Panels and Battery Stands Various shapes and sizes of aluminum are available for sale. Contact your local dealer for details.

Solar Panel Battery Charger

These 10 watt & 20 watt solar panels offer outstanding performance even in cloudy conditions. This charger will efficiently keep your marine battery charged without overcharging. Rugged enough for year-round installation. 10 Watt Dimensions: 13-1/2” x 11” 20 Watt Dimensions: 24-1/2” x 11” 30 Watt Dimensions: 23-1/4” x 17-3/4” part# LSPP10 10 Watt 12V Solar Panel Package (Includes Solar Panel, Stand, and Status Indicator with Charge Regulator) 10 Watt 12V Solar Panel Only part# LSP10 20 Watt 12V Solar Panel Package (Includes Solar Panel, Stand, Status Indicator with Charge Regulator) part# LSPP20 20 Watt 12V Solar Panel Only part# LSP20 30 Watt 12V Solar Panel Package (Includes Solar Panel, Stand, Status Indicator with Charge Regulator) part# LSPP12-30 30 Watt 24 V Solar Panel Package (Includes Solar Panel, Stand, Status Indicator with Charge Regulator) part# LSPP30 40 Watt 24 V Solar Panel Package (Includes Solar Panel, Stand, Status Indicator with Charge Regulator) part# LSPP40 Solar Panel Stand only part# LSPS10 Status Indicator part# LSPSB

System Components

10 Watt Panel

Status Indicator

Battery Box Stand

Kill A Watt

These battery box stands keep your marine batteries off your dock and out of the way. 12V Stand Clamps to square or round tube part# L1HYBBS 24V Stand Bolts on, drilling required part# L1HYBBS24

20 & 30 Watt Panel

16-1/2” ID

13-1/2” ID

13-5/8” ID

8-1/2” ID

Simply plug in Kill A Watt to evaluate the quailty of the electrical power provided from your utility company, by monitoring voltage, live frequency and power factor. Perfect for detecting voltage drops and brownout conditions before they damage delicate equipment. part# LWMETER

77 77

Boat Lift Boss Electric Hoist Various shapes and sizes of aluminum are available for sale. Contact your local dealer for details.

Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

Boat Lift Boss

The Lift Boss Boat Lift Direct Drive System takes the place of the standard winch wheel. It features convenient remote control operation and dock lighting for added safety. The unit is quick and easy to install and is available in AC and DC versions. For use on lifts up to 6000 lb lifting capacity. Brackets available for all lift brands. The Lift Boss double sealed motorshaft, sealed electrical box, and O-rings around the rivets allow for extra protection from the elements. This unit includes a two piece cover. Please ask your dealer for details.

AC Unit

Drive unit, AC non-remote control box with key, or AC remote control box complete with key and one wireless remote control key fobs.

DC Unit

Includes 12 or 24V DC drive unit, non-remote control box with key or DC remote control box complete with one wireless remote control key fob. Optional Jumper Wire needed to run motor (24V) part# NAHYBC18

Motor

AC 110V Unit w/Remote AC 110V Unit w/Key Switch DC 12V/24V Unit w/Remote DC 12V/24V Unit w/Key Switch

RPM

56 60 58 at 12V 96 at 24V 58 at 12V 96 at 24V

Current Draw

7-16 AMPS 9-11 AMPS 40-80 AMPS at 12V 20-40 AMPS at 24V 40-80 AMPS at 12V 20-40 AMPS at 24V

Part #

LWHDD110 LWHDDS110 LWHDD12

Installation Kits Beach King

Daka Lifts Dock Rite Dutton-Lainson B1200, 1500, 2500 (Lorenz winch) Floe inc (Open Face winch) Fulton Harbormaster Hewitt Lakeside Lift (Lorenz winch) Porta-Dock RGC ShoreMaster Shorestation (Up to 4000) Shorestation (Up to 6000)

LWHDDS12

Optional Jumper Wire needed to run motor (24V) part# NAHYBC18

Buck Booster

Used when electrical wiring is inadequate or if faster lifting time is desired. AC Models ONLY! part# LWHDDB

78 78

Limit Switch

Mechanical spring driven limit switch prevents you from overlifting your boat on lift. AC/DC Models with remote ONLY! Lift Boss part# LWHDDL Shore Commander, Rail, Proteus part# LWHDDSS

DC Model

AC Model

Lift Boss Pendant

15’ Hand pendant for lift boss turn key. part# LWHDDPEN

Lift Boss LED Light part# LWHDDK-LIGHT

part# LWHDDK-L part# LWHDDK-L part# LWHDDK-L part# LWHDDK-DL part# LWHDDK-L part# LWHDDK-L part# LWHDDK-F part# LWHDDK-HM part# LWHDDK-H part# LWHDDK-L part# LWHDDK-PD part# LWHDDK-RGC part# LWHDDK-SM part# LWHDDK-SS4 part# LWHDDK-SS6

10’ Battery Extension part# LWHDDB10

Integrated Hoist

All-in-one winch and motor available in: AC with remote DC with remote 5,000lb AC DC

part# LWIWAC part# LWIWDC

7,500lb for 5/16” Cable part# LWIWAC516 AC part# LWIWDC516 DC 7,500lb for 3/8” Cable part# LWIWAC38 AC part# LWIWDC38 DC

Stainless Steel Hardware

Anodized Aluminum Housing

•All the hardware found throughout the unit, inside and out, is constructed of high-grade stainless steel and will never rust.

• The clear anodized finish provides a great look while protecting it from corrosion.

High-Power 120V or 12/24V Motor

•Available in both AC and DC models, designed and perfected for the marine environment. AC models are designed for lifts with access to GFI-protected shore power, while DC models run either on 12V or 24V battery power. Powering DC models with 24V will nearly double the lift speed. Additional battery, solar power and wiring are required.

Heavy-Duty Worm Drive Gear Head

• The Heavy-Duty Worm Drive Gear has been painstakingly engineered through years of development to survive and surpass the stress and torque experienced with the weight of today’s lifts. The trauma force that lifts face cause many of the competitors’ off-the-shelf parts to fail, but Boat Lift Boss Worm Drive Gear Head has the strength and holding power to not simply outlast, but to thrive in these extreme conditions.

Weather-Resistant ABS Housing

•The fully-sealed injection-molded electronics housing offers the best protection for the electrical components while providing a clean factory-designed look, not just the bolted-on afterthought look other brands feature.

Heavy-Duty Roller Bearings

•All major load-bearing points utilize oversized bearings and are protected with a plastic cover and weatherproof O-ring. Competitors use bronze bushings that can fail rapidly and crush under a load.

Heavy-Duty Chain and Sprockets

• Heavy-duty hardened steel sprockets add life to the unit, while the heavy-duty chain is spun on a true roller bearing instead of a bronze bushing.

Field Upgradeable Quick-Detach Electronics

•The quick-detach electronic connectors allow a quick and easy electronics swap without ever needing to remove the entire unit from the lift. Eight simple screws and one quick-connect plug are all that fasten the electronics to the rest of the Boat Lift Boss, making it all possible to change the entire electrical system in less than two minutes. This feature is especially helpful when a customer wishes to add a wireless remote control to their existing Boat Lift Boss.

HDPE Cable Keeper INTEGRATED, DIRECT DRIVE, WHEEL DRIVE

The Engineering Wonder That Makes This Drive System Remarkable

• When there is no load on the winch, cables have the potential to loosen and slip outside of the spool, which the consumer would not recognize until too late. Cables becoming caught in the chains and sprockets can cause expensive damages to the lift and leave it unusable. The HDPE Cable Keeper eliminates this possibility by keeping the cable fully contained in the spool where it belongs.

High-Sided Winch Drum

•High sides on the winch drum work in conjunction with the Cable Keeper so no cable can escape through the top while also allowing plenty of space for extra cable should it be needed.

Roller Fairlead

•The Roller Fairlead guides the cable properly into the drum and is recessed close to the spool, preventing the cable from ever jumping outside of the drum.

79 79

Heavy-Duty Electric Hoists Indicates this product is shippable via UPS from your local dealer or visit us online at www.hewittrad.com.

Heavy Duty Motor / E-Gear Remote

Heavy Duty Hoist Motors

Hewitt Heavy Duty Hoists are an alternative to the manual winch. They feature a heavy-duty worm drive powered by a 115V AC or 24V DC motor. High-strength, precision machined components allow these hoists to be rated for higher lifting capacities than competitive brands. Available in three models for capacities of 2000, 4000, 6500 and 8500 lbs. Cast gears, pulleys, motors and wire gauge are specifically sized to the capacity. Hoists include a protective cover, weatherproof wiring and a baked-on powder coated finish.

Is built with a manual up and down push button, or use the two wireless remote key fobs included. Heavy duty motor remote has an auto stop plug that allows you to add a mechanical limit switch to stop the motor at a specific boat lift height. 110 V 24 V

Cable Drum

Capacity

4000 lbs 4000 lbs 6500 lbs 6500 lbs 8500 lbs

80 80

Box Drum »

Motor 1 H.P. 1 H.P. 1.5 H.P. 1.5 H.P. 1.5 H.P.

Weight

78 lbs 78 lbs 99 lbs 99 lbs 110 lbs

part# LRMR part# LRMR24

See optional limit switch on pg. 72.

Wiring

14 ga. 14 ga. 14 ga. 14 ga. 12 ga.

Plate

12” x 24” 12” x 24” 12” x 24” 12” x 24” 12” x 24”

Gear 12” 12” 12” 12” 12”

Part # 110V

LWHP4 (w/cable drum) LWHP4B (w/box drum) LWHP6 (w/cable drum) LWHP6B (w/box drum) LWHP8 (w/cable drum)

Part # 24V

LWHP4-24 (w/cable drum) LWHP4B-24 (w/box drum) LWHP6-24 (w/cable drum) LWHP6B-24 (w/box drum) LWHP8-24 (w/cable drum)

Canopy Accessories & Camper Stabilizers

Canopy Storage Net

Canopy LED Lighting

Canopy Bracing

Canopy Repair Kit

Tension Cords

Storage net creates storage under your canopy. Net protects gear from sun, rain, wind, and theft. Installs with quick release clips in minutes. No tools required. Makes boating much more enjoyable. Turn your canopy into a boathouse today.

Wireless light kit turns your boat and boat lift canopy into an extended evening entertainment area, adding ample light to continue the festivities. Just a quick click on the remote (included) will turn the lights on or off.

Used to support canopies 29’ and up. Completely adjustable with the telescoping extension.

Did you have an accident and puncture your canvas? No problem This canvas repair kit is easy to use for permanent repairs of small holes and tears in your canvas. This patch kit comes with a 4 oz can of adhesive with brush and one 1/4 square yard of fabric in your color choice.

Tired of tying canvas to your canopy frame and cutting knots when you remove the canvas? Then tension cords are the answer! Quick and easy.

Size Small Medium Large

Width 96” - 107” 108” - 120” 121” - 138”

Bird Deterrent

Part # LDCS1096 LDCS1108 LDCS1138

Keep birds away and your canopy clean. Bracket attaches to a lift upright and then over the canopy frame. Allows removal of your canopy cover without having to remove the bird deterrent. part# DBIRDC

For 3’x3’ Rails For 3’x6’ Rails

part# LDCB part# LDCBJ

Vinyl Defender SeaMark

part# LWHDDCLR

part# REPAIR-(color) part# REPAIRD-(color) part# REPAIRS-(color)

Canopy Mesh Skirt

Camper Stabilizers

42” mesh skirt that attaches to the canopy frame work.

Lightweight, but heavy-duty stabilizers remove the side-to-side and front-to-back frame movement. No more annoying sway! Stabilize frame heights from 19-26 inches high. Any camper with an exposed frame works well with our camper stabilizers.

Call for more information.

Set of 40 part# LDR

part# TSTABLE Complete with: • Two stabilizing legs • Two adjustable pins • Chain • Binder

81 81

10. Leather Portfolio – embossed logo. 11. Hewitt Beach Towel. 12. Grill Tool with printed logo. 13. Insulated Beverage Container – black with screen printed logo. 14. Can Coolers with screen printed logo. 15. Backpack – black with screen printed logo. 16. Soft-Sided Cooler – blue with screen printed logo. 17. Insulated Cup with Handle – white with printed logo. 18. Insulated Beverage Containers with printed logo.

1. Embroidered baseball cap, various colors. 2. Stocking cap, various colors. 3. Polo T-shirts, various colors – embroidered. 4. Polar fleece jacket, various colors. 5. Embroidered sweatshirt in two logo styles, various colors. 6. Micro fiber pullover, various colors. 7. Hooded sweatshirt with full front logo – screen printed. 8. T-shirts, various colors – screen printed. 9. Messenger Bag in black with screen printed logo.

Apparel

15 10 11

13 18 12 8

14 6 5 3

82 82

We at HEWITT would like to thank you for your interest in our products. We are confident that you will find the service, quality, workmanship, and design of all HEWITT products to be the industry’s finest. For over 40 years, boat and watercraft owners have trusted the safety and longevity of their investments to Hewitt lifts, docks, and canopies.

LIMITED WARRANTY During the periods stated below from the earlier of the date of purchase or the date the product was put into service, Hewitt Machine & Mfg., Inc. (hereinafter “HEWITT”) shall cover the costs of parts needed to repair or replace any of the following products defective in material, workmanship or factory preparation, subject to the limitations and expectations contained herein. 1. 15 year warranty on aluminum welds; 2. 5 year warranty on the following: a. BoatPort galvanized steel and welds; b. Vinyl and SeaMark canvases; and c. Aluminum decking. 3. 3 year warranty on BoatPort polyethylene tanks. 4. 2 year warranty on all other products and accessories. (hereinafter the “Warranted Products”) This Limited Warranty is subject to the following limitations and exceptions: 1. This Limited Warranty covers only Warranted Products manufactured by HEWITT. Non-HEWITT manufactured products are sold “ as is,” without warranty of any kind by HEWITT including any express warranty and implied warranty regarding MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND ALL SUCH WARRANTIES ARE DISCLAUMED. The sole warranty, if any, with respect to such non-HEWITT manufactured products is given by the manufacturer or producer thereof. Based upon HEWITT’s knowledge the following warranties are provided by other manufacturers: hydraulic pumps and hoses carry a manufacturer’s 2 year warranty. Hydraulic cylinders carry a manufacturer’s 1 year warranty. BoatPort controller carries a manufacturer’s 1 year warranty. However, HEWITT makes no representations or warranties concerning these nonHEWITT manufactured products, and the customer should inquire directly with such third party manufacturers regarding any warranties. 2. This Limited Warranty covers only Warranted Products purchased new by the original purchaser. This Limited Warranty shall not extend to anyone other than the original purchaser of the HEWITT product. 3. This Limited Warranty does not cover the labor costs to repair or replace the Warranted Products. 4. This Limited Warranty does not cover the costs to repair damage to the Warranted Products caused by corrosion, fading and minor deterioration resulting from exposure to the elements, including the sun, environmental factors or acts of God. “Environmental factors” include such things as airborne fallout, chemicals, tree sap, salt, ocean spray, water hazards. “Acts of God” include such things as fire or accident, rainstorms, hailstorms, windstorms, tornados, sandstorms, lightning, floods and earthquakes. 5. This Limited Warranty does not cover the costs to repair damage to the Warranted Products caused by abuse, misuse, neglect, poor/ improper maintenance, tampering with parts, improper or unauthorized adjustment or alteration.

6. This Limited Warranty does not cover the costs to repair damage to the paint and/or finishes, puncture damage, dents, or scratches of the Warranted Products. 7. This Limited Warranty does not cover the costs of normal/scheduled maintenance of the Warranted Products. 8. This Limited Warranty does not cover the costs to repair damage to the Warranted Products caused by improper installation. 9. This Limited Warranty does not cover the costs to repair damage to the Warranted Products caused by the failure to comply with specifications or instructions. Specifications and instructions are subject to change without notice. 10. HEWITT reserves the right to make changes in the Warranted Products at any time without incurring any obligation under this Limited Warranty to make the same or similar modifications on Warranted Products previously manufactured and/or sold. 11. In the event of a possible warranty claim, the Warranted Product shall be returned to HEWITT. If proven to be defective upon inspection, the defective Warranted Product shall be exchanged for new or comparable rebuilt products, as determined by HEWITT. and shipped back to the original owner/purchaser. All shipping costs are the responsibility of the customer. Warranty replacement shall not extend the original warranty period of the defective Warranted Product. HEWITT must be notified in writing within one month of the expiration of the applicable period of the Limited Warranty for an item to be evaluated for warranty. 12. The customer’s remedies with respect to Warranted Products shall be exclusively limited to the repair or replacement remedy as provided in this Limited Warranty and in no event shall HEWITT be liable for loss of profits, revenues, savings, inconvenience, associated costs, expense for equipment or service, use of capital, facilities, services, storage charges, damage to property, or any other special, incidental or consequential damages caused by the use or misuse of, or inability to use, the Warranted Product, regardless of the legal theory on which the claim is based, and even if HEWITT has been advised of such damages. In no event shall recovery of any kind against HEWITT be greater in amount than the purchase price of the Warranted Product sold by HEWITT and causing the alleged damage. Without limiting the foregoing, the purchaser assumes all risk and liability for loss, damage or injury to persons, animals or property arising out of use or misuse of, or inability to use, the Warranted Product. HEWITT is not liable for third party claims. In no event shall HEWITT be liable for incidental or consequential damages to the full extent such may be disclaimed by law. 13. This Limited Warranty is the only warranty between the parties. This Limited Warranty states the limits and association of risk between two parties. The customer acknowledges and understands this Limited Warranty and agrees to be bound by the terms contained herein. No other express or implied warranties or guaranties, except as indicated in this Limited Warranty, given by any person or entity with respect to HEWITT and its products shall bind HEWITT. This Limited Warranty supercedes all other warranties expressed or implied. NO IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE APPLY TO HEWITT AND ITS PRODUCTS AND ARE HEREBY DISCLAIMED. Specifications are subject to change without notice.

709 Old Hwy 14, Nicollet, MN 56074 Weekdays, 7:00 am to 4:00 pm CST Ph: 507.225.3421 or 800.544.2067 Fax: 507.225.3053 www.hewittrad.com PRINTED IN THE USA 01-2024

Hewitt Docks, Lifts & Pontoon Legs - Accessories Catalog

Articles inside

Integrated Hoist

Roll-A-Rail Accessories

Sectional Dock Systems

Hewitt Apparel

Boat Lift Boss Hoists

Heavy-Duty Electric Hoists

ThruFlow Decking

LIft Wheels