Contents
To the student v
Practical work in chemistry 1
1 – Atomic structure
4
4 – The Periodic Table
89
1.1 Early ideas about the composition of matter
5
4.1 Classification of the elements in s, p and d blocks
90
1.2 Relative mass and relative charge of subatomic particles
8
4.2 Properties of the elements in Period 3
94
1.3 Working with very small and very large numbers 9
1.4 Atomic number, mass number and isotopes
11
5.1 Organic and inorganic compounds
103
1.5 Relative atomic mass, Ar 17
5.2 Molecular shapes
105
1.6 Relative molecular mass, M r 17
5.3 Types of formulae
105
1.7 Describing electrons
18
1.8 Ionisation energies
22
5.4 Functional groups and homologous series 108
1.9 Evidence for shells and sub-shells 23
5.5 Naming organic compounds
112
5.6 Reaction mechanisms
117
5.7 Isomers
119
5 – Introduction to organic chemistry 102
2 – Amount of substance
30
2.1 Relative masses
31
6 – The alkanes
128
2.2 The mole and the Avogadro constant
32
6.1 Fractional distillation of crude oil
129
2.3 The ideal gas equation
36
6.2 Cracking
132
2.4 Empirical and molecular formulae
41
6.3 Combustion reactions of alkanes
136
2.5 Chemical equations
43
6.4 Problems with alkane combustion
138
2.6 Ionic equations
48
6.5 Reactions of alkanes with chlorine
141
2.7 Reactions in solutions
49
7 – Energetics
147
3 – Bonding
61
7.1 Exothermic and endothermic reactions 148
3.1 Ionic bonding
62
7.2 Enthalpy change
3.2 Covalent bonding
64
3.3 Metallic bonds
66
7.3 Standard enthalpy of combustion, ∆c Hq 149
3.4 Bonding and physical properties
67
7.4 Standard enthalpy of formation, ∆f Hq 150
3.5 Shapes of molecules and ions
71
7.5 Measuring enthalpy changes
3.6 Bond polarity
74
7.6 Using Hess’s law to measure enthalpy changes 158
3.7 Forces between molecules
77
7.7 Bond enthalpies
148
151
162
iii
90216_Piii_v.indd 3
02/06/15 10:08 PM
CONTENTS
8 – Kinetics
171
13 – Halogenoalkanes 263
8.1 What affects the rate of a reaction?
172
13.1 What are halogenoalkanes?
8.2 Collision theory
172
8.3 Activation energy
173
13.2 Chemical reactions of halogenoalkanes 265
8.4 The Maxwell–Boltzmann distribution of energies
13.3 Ozone in the stratosphere
176
8.5 The effect of temperature on the rate of a reaction
176
8.6 The effect of concentration on the rate of a reaction
177
8.7 Catalysts
183
264
272
14 – Alkenes 280
14.1 Structure and bonding in alkenes
281
14.2 Addition reactions of alkenes
283
14.3 Addition polymers
290
15 – Alcohols 295 9 – Equilibria
191
15.1 Alcohols
296
9.1 The dynamic nature of equilibria
192
15.2 Ethanol production
298
9.2 The equilibrium constant, KC 195
15.3 Chemical reactions of alcohols
301
9.3 Changes that affect a system in a homogeneous equilibrium
197
15.4 Elimination reactions of alcohols
307
9.4 Industrial processes and equilibria
203
16 – Analytical techniques 314
10 – Redox reactions 209
16.1 Identifying functional groups
315
10.1 Oxidation and reduction
210
16.2 Mass spectrometry
320
10.2 Oxidation states
211
16.3 Infrared spectroscopy
322
10.3 Redox equations
217
16.4 The global warming link
328
11 – G roup 2, the alkaline earth metals 225
Answers
334
Glossary
350
11.1 Trends in physical properties
226
Index 355
11.2 Extracting titanium
229
Acknowledgements
11.3 Trends in chemical properties
230
11.4 Uses of Group 2 hydroxides
232
11.5 The relative solubilities of the Group 2 sulfates
235
12 – Group 7(17), the halogens
242
12.1 Trends in physical properties
243
12.2 Trends in chemical properties
245
12.3 The halide ion
247
12.4 Uses of chlorine
254
359
iv
90216_Piii_v.indd 4
02/06/15 10:08 PM
To the student
To the student The aim of this book is to help make your study of advanced chemistry interesting and successful. It includes examples of modern issues, developments and applications that reflect the continual evolution of scientific knowledge and understanding. We hope it will encourage you to study science further when you complete your course.
Using this book Chemistry is fascinating, but complex – underpinned by some demanding ideas and concepts, and by a great deal of experimental data (‘facts’). This mass of information can sometimes make its study daunting. So don’t try to achieve too much in one reading session and always try to keep the bigger picture in sight. There are a number of features in the book to help with this:
• Each chapter starts with a brief example of how the chemistry you will learn has been applied somewhere in the world, followed by a short outline of what you should have learned previously and what you will learn through the chapter.
• Important words and phrases are given in bold when used for the first time, with their meaning explained. There is also a glossary at the back of the book. If you are still uncertain, ask your teacher or tutor because it is important that you understand these words before proceeding.
• Throughout each chapter there are many questions, with the answers at the back of the book. These questions enable you to make a quick check on your progress through the chapter.
• Similarly, throughout each chapter there are checklists of key ideas that summarise the main points you need to learn from what you have just read.
• Where appropriate, worked examples are included to show how important calculations are done. • There are many assignments throughout the book. These are tasks relating to pieces of text and data that show how ideas have been developed or applied. They provide opportunities to apply the science you have learned to new contexts, practise your maths skills and practise answering questions about scientific methods and data analysis.
• Some chapters have information about the ‘required practical’ activities that you need to carry out during your
course. These sections provide the necessary background information about the apparatus, equipment and techniques that you need to be prepared to carry out the required practical work. There are questions that give you practice in answering questions about equipment, techniques, attaining accuracy, and data analysis.
• At the end of each chapter are practice questions. These are examination-style questions which cover all aspects of the chapter.
This book covers the requirements of AS Chemistry and the first year of A-level Chemistry. There are a number of sections, questions, assignments and practice questions that have been labelled ‘Stretch and challenge’, which you should try to tackle if you are studying for A-level. In places these go beyond what is required for the specification but they will help you build upon the skills and knowledge you acquire and better prepare you for further study beyond advanced level. Good luck and enjoy your studies. We hope this book will encourage you to study chemistry further when you complete your course.
v
90216_Piii_v.indd 5
02/06/15 10:08 PM
4
4 THE PERIODIC TABLE PRIOR KNOWLEDGE You have probably learnt that elements can be organised into groups and periods in the Periodic Table. You may know that the Periodic Table is a useful tool for chemists and can be used to determine an element’s electron configuration. You may also know that we can use the Periodic Table to predict some properties of the elements.
LEARNING OBJECTIVES In this chapter, you will reinforce and build on these ideas and learn more about trends in physical properties of elements and how these match the positions of the elements in the Periodic Table. (Specification 3.2.1.1, 3.2.1.2)
All the elements in the Periodic Table up to atomic number 92 occur naturally; that is, you can find them somewhere on Earth. Elements with atomic numbers greater than 92 are artificially made. Making these heavy elements involves smashing
together other atoms or nuclei to make a larger atom. This only happens in nuclear reactions or in particle accelerators. In 2010, Russian and American scientists first reported that they had made element 117. German scientists confirmed their findings in May 2014. Element 117 has 117 protons and, as yet, no official name. It has been given the temporary name ununseptium. Its electronic configuration is: [Rn]5f146d107s27p5 where [Rn] indicates the electronic configuration of the noble gas Radon, Rn. The arrangement of its outermost electrons, 7s27p5, means it will be in Group 7(17), the halogens. Only a few atoms have been made and so its physical properties are unknown. Because of its high relative atomic mass, it is not expected to be a typical halogen, but it may follow the Group 7(17) trends in its melting and boiling points and in its ionisation energies. A working party from the International Union of Pure and Applied Chemistry (IUPAC) is currently meeting to decide whether element 117 can be made official and added to the Periodic Table. Then it will be given a formal name.
89
90216_P089_101.indd 89
6/2/15 2:37 PM
4 THE PERIODIC TABLE
4.1 CLASSIFICATION OF THE ELEMENTS IN s, p AND d BLOCKS
New IUPAC rules have renumbered the groups so that Groups 1 and 2 remain the same, but the new Group 3 is the group of transition metals from scandium down and what was called Group 3 becomes Group 13. This is because the transition elements in Periods 4 to 7 had not been assigned group numbers, but they have now. So, for example, copper, silver and gold are in the new Group 11.
Developing the Periodic Table As more and more elements were discovered in the eighteenth and nineteenth centuries, several attempts were made to arrange the elements in some sort of order. It was not until more accurate atomic mass values became available that real progress started to be made. Dmitri Mendeleev’s attempt at classification was so successful that it became the basis for today’s modern Periodic Table.
In this chapter, groups will be described by their old numbers with the new numbers in brackets. The halogens, for example, are in Group 7(17). All elements in Group 1 have one electron in their outermost shell, all elements in Group 2 have two electrons in their outermost shell and so on (Figure 2). You can now expand this idea. All the elements in a particular group have the same number of electrons in their outermost sub-shell. This characterises the group. So, Group 1 elements always have one electron in the s sub-shell and Group 2 elements have two electrons in the s sub-shell. Group 3(13) elements always have two electrons in the s sub-shell and one electron in the p sub-shell. The pattern continues to Group 7(17), with two electrons in the s sub-shell and five electrons in the p sub-shell. Group 0(18) has two electrons in the s sub-shell and six in the p sub-shell.
The modern Periodic Table Mendeleev arranged the elements in order of relative atomic mass (then called atomic weight). In 1913, Henry Moseley showed that the order of elements in the Periodic Table could be more accurately related to another property, atomic number (Z) (see Chapter 1). In a few cases, this order is not the same as the relative atomic mass order. Iodine (Z = 53) has a relative atomic mass of 126.9 whereas tellurium (Z = 52) has a relative atomic mass of 127.6. Mendeleev’s table needed a few adjustments to produce the modern Periodic Table used today (Figure 1). The horizontal rows of elements in the Periodic Table are called periods and are numbered 1 to 7. These correspond to the electron shells. The vertical columns are called groups. Traditionally, these are numbered 1 to 0, where Group 1 contains the elements lithium, sodium, potassium and down the group to francium. Group 3 is the vertical column that contains, for example, boron and aluminium.
Using the old system, the total number of electrons in the outer shell is the same as the element’s old group number. For example, nitrogen, which is in Group 5(15), has 2s2 and 2p3 electrons, totalling five electrons in its outer shell (the superscript number shows the number of electrons in the particular sub-shell). Key
Group Period 1
1
2
p block
1 H hydrogen
3(13)
atomic no symbol name
s block
4(14) 5(15)
6(16) 7(17) 0(18) 2 He helium
d block
2
3 Li lithium
4 Be beryllium
3
11 Na sodium
12 Mg magnesium
4
19 K potassium
20 Ca calcium
21 Sc scandium
22 Ti titanium
23 V vanadium
5
37 Rb rubidium
38 Sr strontium
39 Y yttrium
40 Zr zirconium
41 Nb niobium
6
55 Cs caesium
56 Ba barium
57 La lanthanum
72 Hf hafnium
73 Ta tantalum
7
87 Fr francium
88 Ra radium
89 Ac actinium
f block
24 Cr chromium
25 Mn manganese
42 43 Mo Tc molybdenum technetium 74 W tungsten
75 Re rhenium
104 105 107 106 Unq Unp Uns Unh unnilquadium unnilpentium unnilhexium unnilseptium
Lanthanides
Actinides
6 C carbon
7 N nitrogen
8 O oxygen
9 F fluorine
10 Ne neon
13 Al aluminium
14 Si silicon
15 P phosphorus
16 S sulphur
17 Cl chlorine
18 Ar argon
26 Fe iron
27 Co cobalt
28 Ni nickel
29 Cu copper
30 Zn zinc
31 Ga gallium
32 Ge germanium
33 As arsenic
34 Se selenium
35 Br bromine
36 Kr krypton
44 Ru ruthenium
45 Rh rhodium
46 Pd palladium
47 Ag silver
48 Cd cadmium
49 In indium
50 Sn tin
51 Sb antimony
52 Te tellurium
53 I iodine
54 Xe xenon
76 Os osmium
77 Ir iridium
78 Pt platinum
79 Au gold
80 Hg mercury
81 Ti thallium
82 Pb lead
83 Bi bismuth
84 Po polonium
85 At astatine
86 Rn radon
108 109 Uno Une unniloctium unnilennium
58 Ce cerium
59 60 61 62 Pr Nd Pm Sm praseodymium neodymium promethium samarium
90 Th thorium
91 Pa protactinium
92 U uranium
5 B Boron
63 64 Eu Gd europium gadolinium
95 94 93 Am Pu Np neptunium plutonium americium
96 Cm curium
65 Tb terbium
66 Dy dysprosium
67 Ho holmium
99 98 97 Es Cf Bk berkelium californium einsteinium
68 Er erbium 100 Fm fermium
69 Tm thulium
70 Yb ytterbium
71 Lu lutetium
101 103 102 Md Lr No mendelevum nobelium lawrencium
Figure 1 The modern Periodic Table.
90
90216_P089_101.indd 90
6/2/15 2:37 PM
4.1
Classification of the elements in s, p and d blocks
Group
1
2 H 1s1
1
Period
3(13) 4(14) 5(15) 6(16) 7(17) 0(18) He 1s 2
2
Li 2s1
Be 2 2s
B C N O F Ne 2 1 2 2 2 3 2 4 2 5 2 6 2s 2p 2s 2p 2s 2p 2s 2p 2s 2p 2s 2p
3
Na 3s1
Mg 3s 2
Al Si P S Cl Ar 3s2 3p1 3s 2 3p2 3s2 3p3 3s2 3p4 3s 2 3p5 3s 2 3p6
4
K 4s1
Ca 2 4s
Sc Ti V Cr Mn Fe Co Ni Cu Zn Ga Ge As Se Br Kr 5 2 2 2 5 1 8 10 3d14s 3d24s 2 3d34s 3d 4s 3d 4s 3d64s 2 3d 74s2 3d 4s 2 3d104s1 3d 4s2 4s2 4p1 4s 2 4p2 4s 2 4p3 4s2 4p4 4s2 4p5 4s2 4p6
Figure 2 The first 36 elements of the Periodic Table and their outer electronic structures.
The Periodic Table is divided into blocks according to which sub-shell is being filled (see Figure 2). Groups 1 and 2 are called the s block elements because electrons are being added to s sub-shells. Groups 3(13) to 0(18) are the p block elements because electrons are being added to the p sub-shell. Sandwiched between the s block and p block are the d block elements where it is the d sub-shells that are being filled. The d block includes the transition
elements. For example, in Period 4, the d block elements are scandium through to zinc, but the transition elements are titanium through to copper (scandium and zinc are not transition metals). Finally, in the lanthanide and actinide elements, electrons are filling f sub-shells and they are called the f block elements. Figure 1 shows these divisions of the Periodic Table.
QUESTIONS 1. For each of the elements with these atomic numbers, write the full electronic structure and state in which block of the Periodic Table it belongs:
3. For each of the following elements, use the Periodic Table to name the block it is in and write its electron configuration. a. Strontium
a. 9
b. Fluorine
b. 20
c. Gold
c. 30
d. Aluminium
2. An element has the electronic configuration 1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p4 a. In which period is the element? b. In which block is the element? c. In which group is the element? d. How many electrons are there in its outer shell?
e. Iron f. Germanium 4. Explain why there are ten d block elements and only six p block elements.
Stretch and challenge 5. The elements from atomic number 104 to 117 have only recently been discovered. Find out their names and suggest a reason for them.
ASSIGNMENT 1: MENDELEEV’S PERIODIC TABLE (PS 1.1, 1.2, 2.3) About 150 years ago, the Russian chemist Dmitri Mendeleev was a teacher at St Petersburg University. As there were no decent textbooks for his students, he decided to write one himself. He
used a file of cards, one for each element, with its properties and atomic mass. By trying different arrangements of the cards, he built up a Periodic Table, which was much the same as the one we know today. The word ‘periodic’ means repeating.
91
90216_P089_101.indd 91
02/06/15 8:25 PM
4 THE PERIODIC TABLE
By arranging the elements in order of atomic weight (we now use relative atomic mass) he found that, if he left a few gaps, chemically related elements occurred at regular intervals. Mendeleev first published a version of his Periodic Table in 1869, in his textbook, Principles of Chemistry (Figure A1). His groupings showed the correct trends in properties and these were later confirmed by experiments. The gaps promoted a search for new elements. Mendeleev’s initial table arranged the elements in columns. He later changed the layout of his table to the version that we are familiar with today. The vertical columns correspond to the periods of elements in the modern Periodic Table and the horizontal rows are the groups of elements.
matched Mendeleev’s predicted properties for eka-silicon (listed in Table 1). Germanium was eka-silicon. In the 20 years that followed, more of Mendeleev’s predicted elements were discovered and his Periodic Table was accepted as an important tool for chemistry.
Questions A1. Mendeleev also left a gap in his Periodic Table under aluminium in Group 3(13). What element fitted this gap? A2. What events led to Mendeleev’s table being accepted by the scientific community? A3. The element rutherfordium (unnilquadium was renamed rutherfordium in 1997), Z = 104, is placed under hafnium in the Periodic Table. Why are scientists predicting that element 117 will be the first halogen to be made artificially? A4. Element 118 was confirmed in 2008. Into which group is it placed? A5. Explain the statement: Mendeleev filled in the gaps in his Periodic Table as new elements were discovered. Today, chemists are still adding to the Periodic Table.
Stretch and challenge
Figure A1 Mendeleev’s Periodic Table
Mendeleev had left a gap below silicon (Group 4 (14)) in his Periodic Table. He gave the unknown element the name eka-silicon and predicted its properties. When the element germanium was discovered, its properties closely
A6. Before Mendeleev’s table, John Newlands had attempted to organise the elements into a table. He listed them in order of relative atomic mass and noticed that elements eight places away from each other had similar properties – he arranged them in rows of eight. His table was known as Newland’s octaves. How far was his table successful, and where did it produce problems?
Silicon, Si
Predicted properties of eka-silicon, Ek
Actual properties of germanium, Ge
Relative atomic mass
28
72
72.59
Density/ g cm−3
2.3
5.5
5.3
Appearance
grey non-metal
grey metal
grey metal
Formula of oxide
SiO2
EkO2
GeO2
Reaction with non-oxidising acid
none
very slow
slow with concentrated acid
Table A1 The properties of silicon and germanium
92
90216_P089_101.indd 92
6/2/15 2:37 PM
4.1
Classification of the elements in s, p and d blocks
ASSIGNMENT 2: PREDICTING PROPERTIES OF AN UNSTABLE ELEMENT (PS 1.1, 1.2, 2.3)
Questions
The element astatine, At, comes after iodine in Group 7(17). When Mendeleev compiled his first Periodic Table, he left a space below iodine and called the element eka-iodine. This was later identified as astatine. The Guinness Book of Records has dubbed astatine as the rarest element on Earth – at any one time there is about 25 g, less than a teaspoonful, on Earth. The Italian physicist Emilio Segrè and his team first produced it in the laboratory at the University of California in 1940. They bombarded bismuth with helium ions, He2+ (also called alpha particles), to produce this new element with atomic number 85. No more than 0.50 µg or 5.0 × 10−7 g has ever been made.
Use the data given in Table A1 to answer these questions.
Its longest lived isotope has a half-life of only 8.3 hours, which means that half the astatine in a sample decays in 8.3 hours. It was named astatine, from the Greek word for ‘unstable’, because of this short half-life. The amount on Earth stays constant because it is formed when some heavier radioactive elements decay.
A5. List the scientific ideas used to make predictions about astatine’s physical and chemical properties.
A1. In which block of the Periodic Table is astatine? A2. Give the outermost sub-shell electron structure of astatine. A3. Predict the following values for astatine: a. density as a liquid
b. melting point
c. first ionisation energy.
A4. Give the formulae of the compounds:
a. sodium astatide
b. hydrogen astatide.
Stretch and challenge A6. Explain why bombarding bismuth atoms with He2+ ions could, theoretically, produce astatine.
Fluorine
Chlorine
Bromine
Iodine
Relative atomic mass
19
35.5
79.9
127
Density as a liquid/g cm−3
1.11
1.56
2.93
4.93
Melting point/°C
−220
−101
−7.2
113.5
Appearance at room temperature
colourless gas
green gas
orange liquid
purple solid
Formula of hydrogen halide
HF
HCl
HBr
HI
1680
1260
1140
1010
First ionisation energy/kJ
mol−1
Table A1 Properties of Group 7(17) elements
KEY IDEAS
›› Elements in the Periodic Table are arranged in
›› Elements are classified as s, p, d or f block
›› The Periodic Table is divided into s, p, d and f blocks. ›› Rows of elements in the Periodic Table are called
›› The Periodic Table can be used to deduce the
order of increasing atomic (or proton) number.
periods and columns are called groups.
elements according to the electron configuration of their outer shells. electron configuration of any element.
93
90216_P089_101.indd 93
02/06/15 8:25 PM
4 THE PERIODIC TABLE
4.2 PROPERTIES OF THE ELEMENTS IN PERIOD 3 Moving across a period, each element has an atomic number one greater than the previous element. Successive elements have one more proton and one more electron in their atoms. This gradual change produces trends in both physical and chemical properties of the elements. These trends, or repeating patterns, are called periodicity – those found in one period are repeated in another period. This section looks at the trends in atomic radius, first ionisation energy and melting point of the elements in Period 3.
Atomic radius Atoms are extremely small. Rutherford first determined the size of an atom. He found that gold atoms have a radius of about 1 × 10−10 m. The atomic radius is the distance from the centre of the atom to its outermost electrons, as shown in Figure 3.
covalent radius (measured in nm)
metallic radius (measured in nm)
bonding pair of electrons The covalent radius is half the shortest distance from one nucleus to the next in a covalently bonded molecule.
metal ion The metallic radius is half the shortest distance from one metal ion nucleus to the next.
Figure 4 Covalent and metallic radii.
The nucleus in an atom is very small. The atom’s size mostly depends on the space its electrons occupy. You might expect that, as the number of electrons increases, so does the size of the atom and the atomic radius. This is true for atoms of elements in the same group. Atomic radius increases down the group because an extra shell of electrons is added with each successive element. But this trend is not repeated across a period. In fact, moving across a period, atomic radius decreases, as shown in Figure 5. Na
Mg
Al
Si
P
S
Cl
Ar
0.191
0.160
0.143
0.118
0.110
0.102
0.099
–
Figure 5 Atomic radii of the elements in Period 3 measured in nanometres (10−9 m).
atomic radius Figure 3 The atomic radius of an element.
The term atomic radius is used to measure the size of an atom, but the size of an atom depends on the space occupied by the electrons. The electron cloud of an atom has no fixed dimensions, because an atom’s electrons could be found anywhere. When you use s, p and d orbitals to locate an electron, this is the most likely place to find the electron. Chemists talk about the probablity of the whereabouts of an electron. It may be elsewhere, which makes identifying the edge of an atom a problem. Atomic radius is usually considered to be half the shortest distance from the nucleus of one atom to that of the nearest atom. Because atoms combine with different types of bonding, there are different types of atomic radii. Covalent radius and metallic radius are two types of atomic radius (Figure 4).
Note that the atomic radius decreases across the period from sodium to chlorine. Metallic radii are given for the metals Na, Mg and Al. Other values are for covalent radii. Argon is a special case. In Period 3 all of the outer electrons are in the third energy level, n = 3, and have two inner shells of electrons shielding the nuclear charge. Moving across the period, a proton is added to the nucleus of each element. An electron is also added, but it goes into the same shell and the positive charge of the nucleus acts over a definite area. The increasing positive nuclear charge pulls with greater force on the negative electrons. All the electron shells are drawn closer to the nucleus. The overall effect is to pull all electrons closer to the nucleus. For example, sodium is larger than magnesium because the nuclear charge of magnesium is greater than that of sodium, but the outer electrons are in the same shell, with the same amount of shielding by the inner electrons. Electrons in magnesium are pulled closer to the nucleus than they are in sodium, resulting in a smaller radius. For the same reason, magnesium is larger than aluminium.
94
90216_P089_101.indd 94
6/2/15 2:37 PM
Properties of the elements in period 3
6. Why is there no atomic radius value for argon in Figure 5? 7. Table 1 gives the atomic radii of elements in Group 1.
Element
Number of electrons
Atomic radius/nm
lithium
3
0.152
sodium
11
0.186
potassium
19
0.227
rubidium
37
0.248
caesium
55
0.265
Table 1 The atomic radii of elements in Group 1
a. What is the trend in atomic radius as you go down Group 1? b. Explain the trend you have described in a. c. Which type of radius is used to measure the atomic radii of Group 1 elements?
Stretch and challenge d. P3− and S2− have the same electron configuration, but have different atomic radii of 0.212 nm and 0.184 nm respectively. Explain why the radii are different.
First ionisation energies The first ionisation energy is the energy required to remove one mole of the outermost electrons from one mole of atoms of an element in the gaseous state (see Chapter 1). First ionisation energies depend on:
›› the charge on the nucleus ›› the distance of the outer electrons from the nucleus ›› the shielding by inner electron shells ›› whether the electron is alone in a orbital, or one of a pair.
Plotting the first ionisation energies of the Period 3 elements against their atomic numbers shows a distinct pattern (Figure 6). A similar pattern is repeated across other periods when s and p electrons
are being removed. This repeating pattern of first ionisation energies across a period is an example of periodicity. The overall trend is that first ionisation energy increases across Period 3. More energy is needed to remove an electron moving across the period because as the number of protons increases, the positive charge on the nucleus increases. The force of attraction on the electrons increases. 1600 Ar
1400
3s23p6 3s23p3
1200 First ionisation energy/kJ mol–1
QUESTIONs
4.2
1000
3s23p5
S
3s2
3s23p4
Mg
800
Si
3s1
600
Cl
P
3s23p2
Na Al
3s23p1
400 200 0
11
12
13
14
15
16
17
18
Atomic number Figure 6 First ionisation energy plotted against atomic number for Period 3 elements.
The increase in first ionisation energy across Period 3 is not a steady rise. The characteristic 2, 3, 3 pattern of increases and dips in first ionisation energy suggests that electrons removed from the third shell are arranged in different sub-shells (see Chapter 1). The first two values of this pattern are for electrons taken from the 3s sub-shell. The value for magnesium is greater than that for sodium because magnesium has one more proton attracting the electrons. Then there is a decrease for aluminium, where the first electron is taken from the 3p sub-shell. This electron is at a higher energy level than those in the 3s sub-shell and so is easier to remove. Aluminium, silicon and phosphorus show the expected increase in the energy required to remove each unpaired 3p electron as the increasing positive charge exerts more force on electrons in the same sub-shell. Then another dip occurs at sulfur as the first paired electron is removed. Paired electrons repel each other; there is more electrostatic repulsion and it is easier to remove the fourth electron in the 3p sub-shell. This is shown in Figure 7 for sulfur.
95
90216_P089_101.indd 95
02/06/15 8:25 PM
4 THE PERIODIC TABLE When an element melts, the particles break free of the forces that hold them together. The greater the force between the particles, the higher the melting point, as energy needs to be supplied to overcome the forces between particles.
3p 3s
Energy
2p
Period 3 elements with a metallic structure
2s
The metals sodium, magnesium and aluminium are held together by metallic bonds. The electrostatic attraction between the delocalised electrons and the positive ions holds the metal crystals together. The charge on the positive ion increases from sodium to aluminium: sodium has a charge of +1, magnesium is +2 and aluminium is +3. The number of delocalised electrons is also increasing and the higher the charge and number of delocalised electrons, the stronger the attraction between the metal ions and delocalised electrons.
1s
Figure 7 The arrows represent electrons in different sub-shells of a sulfur atom.
After sulfur, the increase in the first ionisation energy is due to the increasing positive charge attracting the electrons more strongly.
The size of the metal ion also influences the melting points of the elements sodium to aluminium. The metallic radius decreases from sodium to aluminium (see Figure 5). From sodium to aluminium, the metal ions pack closer together in the metallic structure and the forces between them increase.
Melting points Unlike atomic radii and first ionisation energies, the melting points across Period 3 do not show a regular pattern. Neither is this pattern repeated across any other period. Melting points are directly linked to:
The melting points increase from sodium to aluminium.
›› the type of bonding between atoms of the element ›› the structure of the element.
Period 3 elements with a giant covalent structure
Melting point/°C
The melting points across Period 3 increase from sodium to a maximum at silicon, in Group 4(14), and then decrease dramatically from silicon to argon.
The next element after aluminium is silicon. It is a non-metal with the highest melting point of all the Period 3 elements. Silicon has a giant covalent structure, similar to that of diamond (see Chapter 3). All the silicon atoms are held by strong covalent bonds. For silicon to melt, many of these covalent bonds must be broken. This needs a considerable input of energy, and so gives silicon a very high melting point.
1600 Si 1200
800 Mg
Period 3 elements with a molecular structure
Al
The non-metals phosphorus to chlorine consist of covalent molecules. The forces between molecules are van der Waals forces (weak intermolecular forces). The phosphorus molecule exists as P4, sulfur as S8, and chlorine as Cl2.
400 S
Na 0
11
12
13
P 14 15 16 Atomic number
–400
17 Cl
18 Ar
When these elements melt, only enough energy has to be supplied to break the weak van der Waals forces. The melting points of the non-metals phosphorus to chlorine are low compared with the first four elements in Period 3.
Figure 8 Melting points of the elements in Period 3.
96
90216_P089_101.indd 96
6/2/15 2:37 PM
4.2
Properties of the elements in period 3
them. Their strength is in the order of S8 > P4 > Cl2. This is the order of their decreasing melting points.
Period 3 element: Argon
silicon
Argon exists as single atoms. The atoms in solid argon are held together by very weak van der Waals forces. They are weaker than those in phosphorus, sulfur and chlorine because argon atoms are smaller. Little energy is needed to break them and argon has the lowest melting point in Period 3.
phosphorus, P4
sulfur, S8
chlorine, Cl2
Figure 9 Silicon has a giant structure (top left), with each silicon bonded to four others in a tetrahedral arrangement (top right). phosphorus, sulfur, and chlorine have molecular structures.
The size of the molecules accounts for the difference between the melting points of phosphorus, sulfur and chlorine. Larger molecules have stronger van der Waals forces, so more energy is needed to break
QUESTIONs 8. Look at the melting points for phosphorus and sulfur in Figure 8. a. Describe the type of bonding in solid phosphorus and solid sulfur. b. Explain the melting points in terms of the forces between molecules.
KEY IDEAS
›› Periodicity is used to describe repeating
patterns of properties at regular intervals in the Periodic Table.
›› The atomic radius of elements decreases across Period 3 as the nuclear charge increases.
›› The overall trend across Period 3 is an increase
increases. The irregular increase across a period is due to the filling of sub-shells.
›› Melting points increase from sodium to silicon, then decrease.
›› Melting points depend on the bonding and structure of the element
in first ionisation energy, as the nuclear charge
97
90216_P089_101.indd 97
02/06/15 8:25 PM
4 THE PERIODIC TABLE
ASSIGNMENT 3: EXPLAINING RADII A5. Write the full electron configurations for:
(MS 3.1; PS 1.1, 1.2, 2.3, 3.2) Table A1 lists values for the atomic and ionic radii of some elements. The ionic radius measures the radius of an ion. For example, a sodium ion, Na+, has a radius of 0.098Â nm.
Element
Atomic radius/nm
Ionic radius/nm
lithium
0.152
0.078
sodium
0.186
0.098
magnesium
0.160
0.078
oxygen
0.073
0.124
fluorine
0.071
0.133
Table A1
You are going to use the ideas you have learnt about periodicity to explain some trends in atomic and ionic radii.
Questions A1. Write the symbols for all the ions in Table A1.
a. a sodium ion b. a magnesium ion. A6. Explain why a magnesium ion is smaller than a sodium ion. A7. Write the full electron configuration for: a. a fluoride ion b. an oxide ion. A8. Explain why both fluoride and oxide ions are larger than their respective atoms. A9. Positive ions are cations, negative ions are anions. Suggest how atomic radius compares to the ionic radius of: a. cations b. anions. A10. Use data from Figure 5 to answer these questions. a. What is the atomic radius, in metres, of the elements from sodium to argon? Show your answer in standard form.
A2. Explain why a sodium atom has a larger radius than a lithium atom.
b. Draw a dot-to-dot line graph of atomic number against atomic radius (nm) for the elements sodium to argon.
A3. Explain why a sodium atom has a larger radius than a magnesium atom.
c. Annotate your graph to explain the trend.
A4. Explain why a lithium ion is smaller than a lithium atom.
PRACTICE QUESTIONS 1. The elements in Period 2 show periodic trends. a. Identify the Period 2 element, from carbon to fluorine, that has the largest atomic radius. Explain your answer. b. State the general trend in first ionisation energies from carbon to neon. Deduce the element that deviates from this trend and explain why this element deviates from the trend.
c. Write an equation, including state symbols, for the reaction that occurs when the first ionisation energy of carbon is measured. d. Explain why the second ionisation energy of carbon is higher than the first ionisation energy of carbon. e. Deduce the element in Period 2, from lithium to neon, that has the highest second ionisation energy. AQA Jun 2013 Unit 1 Question 6
98
90216_P089_101.indd 98
6/2/15 2:37 PM
Practice questions
a. Write an equation, including state symbols, to show the reaction that occurs when the first ionisation energy of lithium is measured.
2. Use your knowledge of electron configuration and ionisation energies to answer this question. Figure Q1 shows the second ionisation energies of some Period 3 elements.
Second ionisation energy / kJ mol–1
X
X
b. State and explain the general trend in first ionisation energies for the Period 3 elements aluminium to argon. c. There is a similar general trend in first ionisation energies for the Period 4 elements gallium to krypton. State how selenium deviates from this general trend and explain your answer.
X
X
Mg
Al
Si
P
S
Figure Q1
a. i. Draw an ‘X’ on the diagram to show the second ionisation energy of sulfur. ii. Write the full electron configuration of Al2+. iii. Write an equation to show the process that occurs when the second ionisation energy of aluminium is measured. iv. Give one reason why the second ionisation energy of silicon is lower than the second ionisation energy of aluminium. b. Predict the element in Period 3 that has the highest second ionisation energy. Give a reason for your answer. c. Table Q1 gives the successive ionisation energies of an element in Period 3.
First Second Third Fourth Fifth Sixth Ionisation 786 energy/ kJ mol−1
1580
3230 4360
16 100 19 800
e. Table Q2 gives the successive ionisation energies of an element.
Ionisation energy/ kJ mol−1
First
Second Third Fourth Fifth
590
1150
4940
6480
8120
Table Q2
Deduce the group in the Periodic Table that contains this element. f. Identify the element that has a+5 ion with an electron configuration of 1s2 2s2 2p6 3s2 3p6 3d10. AQA Jun 2011 Unit 1 Question 5 4. a. S tate the meaning of the term first ionisation energy of an atom. b. Copy and complete the electron arrangement for the Mg2+ ion. 1s2.... c. Identify the block in the Periodic Table to which magnesium belongs. d. Write an equation to illustrate the process occurring when the second ionisation energy of magnesium is measured.
Table Q1
d. Suggest why the first ionisation energy of krypton is lower than the first ionisation energy of argon.
Identify this element. d. Explain why the ionisation energy of every element is endothermic. AQA Jan 2013 Unit 1 Question 2
3. This question is about the first ionisation energies of some elements in the Periodic Table.
e. The Ne atom and the Mg2+ ion have the same number of electrons. Give two reasons why the first ionisation energy of neon is lower than the third ionisation energy of magnesium. f. There is a general trend in the first ionisation energies of the Period 3 elements, Na–Ar.
99
90216_P089_101.indd 99
6/2/15 2:37 PM
4 THE PERIODIC TABLE
i. State and explain this general trend.
a. Copy Figure Q3 and use crosses to mark the approximate positions of the values of the first ionisation energies for the elements Na, P and S. Complete the diagram by joining the crosses.
ii. Explain why the first ionisation energy of sulfur is lower than would be predicted from the general trend. AQA Jan 2006 Unit 1 Question 4
b. Explain the general increase in the values of the first ionisation energies of the elements Na–Ar.
5. Figure Q2 shows the melting points of some of the elements in Period 3. a. Copy the diagram and use crosses to mark the approximate positions of the melting points for the elements silicon, chlorine and argon. Complete the diagram by joining the crosses.
c. In terms of the electron sub-levels involved, explain the position of aluminium and the position of sulfur in the diagram. AQA Jan 2004 Unit 1 Question 5 7. Sodium and magnesium are both in the s block of Period 3.
2000
a. What is meant by s block?
Melting point/K
1600
b. The atomic radius of a sodium atom is 0.191 nm. The atomic radius of a magnesium atom is 0.160 nm. Explain why a magnesium atom is smaller than a sodium atom?
1200 800 400 0
Na
Al
Mg
Si
P
S
Cl
Figure Q2
b. By referring to its structure and bonding, explain your choice of position for the melting point of silicon. c. Explain why the melting point of sulfur, S8, is higher than that of phosphorus, P4. AQA Jun 2006 Unit 1 Question 4
First ionisation energy/kJ mol–1
6. Figure Q3 shows the values of the first ionisation energies of some of the elements in Period 3. 1600 600 1400 400 1200 200 1000 800 600 400 200 0
Figure Q3
Ar
c. The first ionisation energy of sodium is 496 kJ mol−1. The first ionisation energy of magnesium is 738 kJ mol−1. Explain why the first ionisation of magnesium is higher than the first ionisation energy of sodium? d. Sodium forms Na+ ions. Magnesium forms Mg2+ ions. Use this information to explain why the melting point of magnesium is higher than the melting point of sodium. e. i. State how the melting point of aluminium compares to the melting points of sodium and magnesium. ii. Explain your answer. 8. Scientists use ideas of first ionisation energy to explain models of electron arrangement in atoms. a. Explain what is meant by the term first ionisation energy. b. Write an equation for the first ionisation energy of sodium.
Na
Mg
Al
Si
P
S
Cl
Ar
c. State and explain the overall trend in first ionisation energies across Period 3. d. The increase in first ionisation energies across Period 3 is not a steady rise.
100
90216_P089_101.indd 100
6/2/15 2:37 PM
Practice questions
i. Which two elements show a drop in first ionisation energy across Period 3?
d. Give two reasons why electronegativity increases across Period 3.
ii. Explain why these two elements have a drop in their first ionisation energies.
e. Explain how electronegativity can be used to predict the type of bonding in SCl2.
e. First ionisation energy trends across a period are an example of periodicity.
Multiple choice
i. State what is meant by periodicity.
11. Which block in the Periodic Table contains the transition metals?
ii. State which element in Period 2 will have the highest first ionisation energy value. Explain your answer.
A. s block B. d block C. p block
f. Write an equation to show the second ionisation energy of magnesium.
D. f block
g. Explain why elements in group 1 do not usually form+2 ions.
12. Which is the correct definition of first ionisation energy?
9. The overall trend in melting points of Period 3 elements is an increase from sodium to silicon and a decrease from silicon to argon.
A. The energy required to remove the outermost electron from an atom of an element in the gaseous state. B. The energy required to produce an ion with one positive charge.
a. i.  Explain why melting points increase from sodium to aluminium.
C. The energy required to remove the outermost electrons from one mole of atoms of an element in the gaseous state.
ii. Explain why silicon has the highest melting point in Period 3. b. Describe the structures of phosphorus, sulfur, chlorine and argon.
D. The energy required to remove one mole of outermost electrons from one mole of atoms of an element in the gaseous state.
c. Explain the following: i. Sulfur has a higher melting point than phosphorus. ii. Melting points decrease from sulfur to chlorine to argon.
13. Which element in Period 3 has a giant covalent structure? A. Silicon
Stretch and challenge
B. Phosphorus
10. Table Q3 gives the atomic radii and electronegativity values for Period 3 elements.
D. Chlorine
C. Sulfur 14. Which element in Period 3 has a molecular structure?
a. Define electronegativity. b. Explain why argon does not have a value for electronegativity.
A. Magnesium
c. State and explain the trend in atomic radius across Period 3.
C. Silicon
B. Aluminium D. Phosphorus
Na
Mg
Al
Si
P
S
Cl
Atomic radius (nm)
0.191
0.160
0.143
0.118
0.110
0.102
0.099
Electronegativity
0.93
1.31
1.61
1.90
2.19
2.58
3.16
Ar
Table Q3
101
90216_P089_101.indd 101
6/2/15 2:37 PM