X ray diffraction

An extremely well-preserved dinosaur ( Cf. Edmontosaurus sp.) found in the Hell Creek Formation (Upper Cretaceous, North Dakota) retains soft-tissue replacement structures and associated organic compounds. Mineral cements precipitated in the skin apparently follow original cell boundaries, partially preserving epidermis microstructure. Infrared and electron microprobe images of ossified tendon clearly show preserved mineral zonation, with silica and trapped carbon dioxide forming thin linings on Haversian canals within apatite. Furthermore, Fourier transform infrared spectroscopy (FTIR) of materials recovered from the skin and terminal ungual phalanx suggests the presence of compounds containing amide groups. Amino acid composition analyses of the mineralized skin envelope clearly differ from the surrounding matrix; however, intact proteins could not be obtained using protein mass spectrometry. The presence of endogenously derived organics from the skin was further demonstrated by p...

Pt nanoparticles were supported on Sb2O5.SnO2 (ATO), on carbon and on physical mixtures of ATO and carbon by an alcohol-reduction process using ethylene glycol as reducing agent. The obtained materials were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). Their performance for ethanol oxidation was investigated at room temperature by chronoamperometry and in a direct ethanol fuel cell (DEFC) at 100 °C. Pt nanoparticles supported on a physical mixture of ATO and carbon showed a significant increase of performance for ethanol oxidation compared to Pt nanoparticles supported on ATO or on carbon.

Cellulose nanofibers with a size range of 5–100 nm have the potential to be a low cost renewable material that has application in a range of products. However, current chemical methods to produce crystalline nanofibers suffer from low yields and high chemical costs, while mechanical methods require high energy costs. Methods to lower the energy costs of the mechanical methods have not been well documented in the literature. A bleached softwood kraft pulp was processed using a mechanical dispersion mill and a homogenizer to produce cellulose nanofibers. Two different commercial enzymes were used to pretreat the wood fibers before the mechanical treatments. The resulting nanofibers were characterized by light microscopy, atomic force microscopy, and inverse gas chromatography. Results indicate that the dispersion mill does not affect the overall pulp fiber fibrillation, but does help prepare the sample for the homogenizer. Most fibrillation occurs after three passes through the homogenizer. The enzyme pretreatment has little effect on the size of the fibers, but does allow for higher solids to pass through the homogenizer without clogging. The dispersion component of surface energy of the resulting nanofibrils is impacted by the type of enzyme used. The measurement of acid–base properties proved to be challenging using current IGC experimental protocols.

Macrocyclic complexes of Mn(II) were synthesized by template condensation using 2,6-diaminopyridine and diethylenetriamine with malonic, succinic, glutaric and adipic acids. The reaction proceeded smoothly to completion. These 16- to 24-membered N(6), but behaving as tetradentate, macrocyclic complexes were characterized by elemental analyses, molecular weight determinations, infrared, electronic, mass and X-ray spectral analyses. The elemental analyses are consistent with the formation of complexes [Mn(N(6)L(n))Cl(2)]. All the complexes are stable and monomeric in nature, as indicated by the molecular weight determinations. The spectral studies confirmed the proposed framework of the new macrocyclic complexes and indicated an octahedral geometry around the central metal atom. The complexes were screened in vitro against a number of pathogenic fungi and bacteria to assess their growth-inhibiting potential. The testicular sperm density, sperm morphology, sperm motility, density of ca...

Spray drying techniques have been applied to improve the solubility and dissolution rate of poorly water-soluble salicylic acid. Spray drying of the acid dispersed in acacia solutions resulted in as much as a 50% improvement in the solubility of the product. Solubility improvement was closely related not only to the concentration of acacia but also the amount of amorphous material in the spray-dried products. The heat of solution was inversely related to these parameters. The dissolution rate of spray-dried product was almost instantaneous being about 60 times faster than that of the original powder. A great improvement in the wettability of the spray-dried material seemed to be mainly responsible for the increase of dissolution rate.

Phosphate-based glasses have been examined in many studies as a potential biomaterial for bone repair because of its degradation properties, which can be controlled and allow the release of various elements to promote osteogenic tissue growth. However most of these experiments studied either tertiary or quaternary glass systems. This study investigated a qinternary system that included titanium dioxide for degradation rate control and zinc that is considered to have a role in bone formation. Zinc and titanium phosphate glass discs of different compositions were melt synthesized and samples of each composition was tested for different physical, chemical and biological characteristics via density measurement, X-ray diffraction, differential thermal analysis, mass loss, ion release, scanning electron microscopy, biocompatibility studies via live/dead assays at three time points (day 1, 4, and 7). The results showed that the glass was amorphous and that the all thermal variables decreas...