Debris Flow

The Bingham model has been suggested for the rheological behaviour of debris flow. Velocity plotted against yield strength uniquely defines turbulent and laminar flow in published experimental data on flow of Bingham materials. These regimes are not defined by a unique value of ...

The estimation of runout distances on fans has a major role in assessing debris-flow hazards. Different methods have been devised for this purpose: volume balance, limiting topographic methods, empirical equations, and physical approaches. Data collected from field observations are the basis for developing, testing, and improving predictive methods, while laboratory tests on small-scale models are another suitable approach for studying debris-flow runout under controlled conditions and for developing predictive equations. This paper analyses the problem of assessing runout distance, focusing on six debris flows that were triggered on July 5th, 2006 by intense rainfall near Cortina d'Ampezzo (Dolomites, north-eastern Italy). Detailed field surveys were carried out immediately after the event in the triggering zone, along the channels, and in the deposition areas. A fine-scale digital terrain model of the study area was established by aerial LiDAR measurements. Total travel and runout distances on fans measured in the field were compared with the results of formulae from the literature (empirical/statistical and physically oriented), and samples of sediment collected from deposition lobes were used for laboratory tests. The experimental device employed in the tests consists of a tilting flume with an inclination from 0° to 38°, on which a steel tank with a removable gate was installed at variable distances from the outlet. A final horizontal plane works as the deposition area. Samples of different volumes and variable sediment concentrations were tested. Multiple regression analysis was used to assess the length of the deposits as a function of both the potential energy of the mass and the sediment concentration of the flow. Our comparison of the results of laboratory tests with field data suggests that an energy-based runout formula might predict the runout distances of debris flows in the Dolomites.

Nella prima parte si fornisce lo stato dell'arte delle conoscenze sulla fisica delle colate detritiche e dei metodi per risolvere le equazioni del moto. Nella seconda parte del presente lavoro vengono presentati e discussi i risultati delle simulazioni effettuate per due bacini italiani, dove le colate di detriti si verificano abbastanza regolarmente e rappresentano una minaccia per la sicurezza della popolazione locale.

... Any modeled debris flow smaller than Case I would also be channelized and would probably produce results similar to those shown in Fig. ... However, is pertinent because the number ofhazardous waves that will strike a given coastline is difficult to predict, and fatalities ...

The recent geological survey works concerning the 1:50000 Merano, Bolzano and Mezzolombardo Sheets within the Bolzano and Trento Autonomous Province CARG project have regarded wide sectors of the volcanic products belonging to the Permian Athesian Volcanic Group (AVG) and the coeval Monte Croce and Ivigna intrusions. In the area has been reconstructed the stratigraphic succession of the Permian volcanic deposits

This paper defines the principal architectural elements present within the Pleistocene, glaciolacustrine basin-fill of the Copper River Basin in Alaska. The Copper River drains an intermontane basin via a single deeply incised trench through the Chugach Mountains to the Gulf of Alaska. This trench was blocked by ice during the last glacial cycle and a large ice-dammed lake, referred to as Lake Atna, filled much of the Copper Basin. Facies analysis within the basin floor allows a series of associations to be defined consistent with the basinward transport of sediment deposited along calving ice margins and at the basin edge. Basinward transport involves a continuum of gravity driven processes, including slumping, cohesive debris flow, hyperconcentrated/concentrated density flows, and turbidity currents. This basinward transport results in the deposition of a series of subaqueous fans, of which two main types are recognised. (1) Large, stratified, basin floor fans, which extend over at least 5 km and are exposed in the basin centre. These fans are composed of multiple lobes, incised by large mega-channels, giving fan architectures that are dominated by horizontal strata and large, cross-cutting channel-fills. Individual lobes and channel-fills consist of combinations of: diamict derived from iceberg rainout and the ice-marginal release of subglacial sediment; multiple units of fining upward gravels which grade vertically into parallel laminated and rippled fine sands and silts, deposited by a range of density flows and currents derived from the subaqueous discharge of meltwater; and rhythmites grading vertically into diamicts deposited from a range of sediment-density flows re-mobilising sediment deposited by either iceberg rainout or the ice-marginal release of sediment. (2) Small, complex, proximal fans, which extend over less than 2 km, and are exposed in the southern part of the basin. These fans are composed of coalescing and prograding lobes of diamict and gravel deposited both directly by subaqueous meltwater and from sediment-density flows. These lobes are cross-cut by a range of sand and gravel-filled troughs and channels cut by subaqueous outwash, and either overlie or are overlain by horizontal sheets of gravel and diamict deposited from a range of sediment-density flows. The fans are, therefore, characterised by a complex, and laterally variable facies, architecture. Water depth, proglacial topography, stability of meltwater portals and sediment supply may all be important in determining the type of subaqueous fan present at any one location. We suggest that the Copper River basin-fill is dominated by packages of sediment containing multiple subaqueous fans with individual fans separated by units of diamict. Each sediment package is in turn separated from the next by a palaeo-landsurface shaped by interstadial/interglacial fluvial processes and by volcanic debris flows.

This study integrates newly acquired stratigraphic data, geologic mapping, and paleocurrent data to constrain the stratigraphic evolution of the oldest channel–lobe complex in the Upper Cretaceous Cerro Toro Formation in the Silla Syncline area of the Magallanes Basin, termed the Pehoe member. The Pehoe member ranges in thickness from 60 m in the north to at least 410 m farther down system and comprises three separate divisions (A, B, and C). A lower conglomerate unit and an upper one, termed Pehoe A and C divisions respectively, represent the fill of major incised submarine channels or channel complexes. These are separated by stratified sandstone of the Pehoe B division, representing a weakly confined lobe complex, either transient or terminal.The integration of new data with observations from previous studies reveal that the three main coarse-grained conglomerate and sandstone members in the Cerro Toro Formation in the Silla Syncline include at least seven distinct submarine channels or channel complexes and two major lobe complexes. The thinning and disappearance of these units along the eastern limb of the syncline reflect confinement of the flows to a narrow trough or mini-basin bounded to the east by a topographic high. This confinement resulted in unidirectional paleocurrents to the south and southeast in all deposits. Changes in depositional geometries are interpreted as reflecting changes in sediment supply and relative confinement. Submarine channels were from 700 m to 3.5 km wide and occupied a fairway that was 4–5 km wide. Flows moving south and southeast in this mini-basin probably crossed the eastern topographic high south of the present exposures and joined those moving southward along the axis of the foreland basin at least 16 km to the east.

Wetar Island is composed of Neogene volcanic rocks and minor oceanic sediments and forms part of the Inner Banda Arc. The island preserves precious metal-rich volcanogenic massive sulfide and barite deposits, which produced approximately 17 metric tonnes of gold. The polymetallic massive sulfides are dominantly pyrite (locally arsenian), with minor chalcopyrite which are cut by late fractures infilled with covellite, chalcocite, tennantite tetrahedrite, enargite, bornite and Fe-poor sphalerite. Barite orebodies are developed on the flanks and locally overly the massive sulfides. These orebodies comprise friable barite and minor sulfides, cemented by a series of complex arsenates, oxides, hydroxides and sulfate, with gold present as <10 μm free grains. Linear and pipe-like structures comprising barite and iron-oxides beneath the barite deposits are interpreted as feeder structures to the barite mineralization. Hydrothermal alteration around the orebodies is zoned and dominated by illite kaolinite smectite assemblages; however, local alunite and pyrophyllite are indicative of late acidic, oxidizing hydrothermal fluids proximal to mineralization. Altered footwall volcanic rocks give an illite K Ar age of 4.7±0.16 Ma and a 40Ar/39Ar age of 4.93±0.21 Ma. Fluid inclusion data suggest that hydrothermal fluid temperatures were around 250 270°C, showed no evidence of boiling, with a mean salinity of 3.2 wt% equivalent NaCl. The δ34S composition of sulfides ranges between +3.3‰ and +11.7‰ and suggests a significant contribution of sulfur from the underlying volcanic edifice. The δ34S barite data vary between +22.4‰ and +31.0‰, close to Miocene seawater sulfate. Whole rock 87Sr/86Sr analyses of unaltered volcanic rocks (0.70748 0.71106) reflect contributions from subducted continental material in their source region. The 87Sr/86Sr barite data (0.7076 0.7088) indicate a dominant Miocene seawater component to the hydrothermal system. The mineral deposits formed on the flanks of a volcanic edifice at depths of ~2 km. Spectacular sulfide mounds showing talus textures are localized onto faults, which provided the main pathways for high-temperature hydrothermal fluids and the development of associated stockworks. The orebodies were covered and preserved by post-mineralization chert, gypsum, Globigerina-bearing limestone, lahars, subaqueous debris flows and pyroclastics rocks.