Lanry Yung

Collagen and glycosaminoglycan (GAG) are native constituents of human tissues and are widely utilized to fabricate scaffolds serving as an analog of native extracellular matrix (ECM).The development of blended collagen and GAG scaffolds may potentially be used in many soft tissue ...

The development of blended collagen and glycosaminoglycan (GAG) scaffolds can potentially be used in many soft tissue engineering applications since the scaffolds mimic the structure and biological function of native extracellular matrix (ECM). In this study, we were able to obtain novel nanofibrous collagen-GAG scaffolds by electrospinning collagen blended with chondroitin sulfate (CS), a widely used GAG, in a mixed solvent of trifluoroethanol and water. The electrospun collagen-GAG scaffold with 4% CS (COLL-CS-04) exhibited a uniform fiber structure with nanoscale diameters. A second collagen-GAG scaffold with 10% CS consisted of smaller diameter fibers but exhibited a broader diameter distribution due to the different solution properties in comparison with COLL-CS-04. After cross-linking with glutaraldehyde vapor, the collagen-GAG scaffolds became more biostable and were resistant to collagenase degradation. This is evidently a more favorable environment allowing increased proliferation of rabbit conjunctiva fibroblast on the scaffolds. Incorporation of CS into collagen nanofibers without cross-linking did not increase the biostability but still promoted cell growth. The potential of applying the nanoscale collagen-GAG scaffold in tissue engineering is significant since the nanodimension fibers made of natural ECM mimic closely the native ECM found in the human body. The high surface area characteristic of this scaffold may maximize cell-ECM interaction and promote tissue regeneration faster than other conventional scaffolds.

Fabrication of nanofibrous scaffolds with well-defined architecture mimicking native extracellular matrix analog has significant potentials for many specific tissue engineering and organs regeneration applications. The fabrication of aligned collagen nanofibrous scaffolds by electrospinning was described in this study. The structure and in vitro properties of these scaffolds were compared with a random collagen scaffold. All the collagen scaffolds were first crosslinked in glutaraldehyde vapor to enhance the biostability and keep the initial nano-scale dimension intact. From in vitro culture of rabbit conjunctiva fibroblast, the aligned scaffold exhibited lower cell adhesion but higher cell proliferation because of the aligned orientation of fibers when compared with the random scaffold. And the alignment of the fibers may control cell orientation and strengthen the interaction between the cell body and the fibers in the longitudinal direction of the fibers. © 2006 Wiley Periodicals, Inc. J Biomed Mater Res, 2006

D-α-tocopheryl polyethylene glycol succinate (TPGS) has been utilized in numerous drug delivery formulations in recent years. Because of its amphiphilic structure, it can be used as emulsifier and vehicle for lipid-based drug delivery formulations. It is also an effective P-glycoprotein (P-gp) inhibitor. However, TPGS represents only one of the surfactants in the class of “Vitamin-PEG” conjugated surfactants. To design a new adjuvant or additive, a conjugate made of vitamin D (cholecalciferol) and PEG-cholecalciferol polyethylene glycol succinate (CPGS) was synthesized via a two-step reaction. We hypothesized that CPGS may exhibit similar characteristics to TPGS, and thus the physicochemical properties as well as the anticancer properties of CPGS were studied. The results demonstrated that CPGS reduced the particle size and increased the encapsulation efficiency of the PLGA nanoparticles, indicating that CPGS may also have the emulsifier function similar to TPGS. The drug release profiles showed that the nanoparticles with CPGS additive had a lower initial burst and more sustained release pattern. In vitro testing with Caco-2 cells showed that CPGS could increase the cytotoxicity of DOX-loaded PLGA nanoparticles. Based on the rhodamine accumulation study, the increased cytotoxicity is possibly due to the P-gp inhibition by CPGS. From current results, the use of CPGS as an adjuvant is promising and may enhance the efficacy of the overall drug delivery system. © 2007 Wiley Periodicals, Inc. J Biomed Mater Res, 2008

Folate-conjugated polymer micelles poly(D,L-lactide-co-glycolide)-poly(ethylene glycol)-folate (PLGA-PEG-FOL) was fabricated to encapsulate anticancer drug doxorubicin for targeting delivery to cancer cells with overexpression of folate receptors. To increase therapeutic effect, D-α-tocopheryl polyethylene glycol succinate (TPGS) was added during the micelles preparation. The physicochemical study showed that the mixed micelles of PLGA-PEG-FOL and TPGS formed a homogeneous population. The addition of TPGS did not result in much variation in the micellar size, surface charge, and drug encapsulation efficiency. The cellular uptake study showed that mixed micelles with TPGS had higher cellular uptake compared with the ones without TPGS to drug-resistant cancer cells. These mixed micelles also selectively increased the cytotoxicity of drug on cancer cells but exhibited minimal cytotoxic enhancement on normal fibroblasts. Furthermore, the accumulation of rhodamine study showed that the mixed micelles with TPGS increased the cellular uptake of drugs on Caco-2 cells. This indicates that TPGS in the mixed micelles may act as P-glycoprotein inhibitor to reduce drug efflux. This new formulation with TPGS may have dual functions of folate-mediated targeting and multidrug resistance inhibition and can be promising in improving the therapeutic efficacy of polymer micellar targeting delivery system. © 2008 Wiley Periodicals, Inc. J Biomed Mater Res, 2009

As a programmable biopolymer, DNA has shown great potential in the fabrication and construction of nanometer-scale assemblies and devices. In this report, we described a strategy for efficient manipulation of gold nanoparticle-bound DNA using restriction endonuclease. The digestion efficiency of this restriction enzyme was studied by varying the surface coverage of stabilizer, the size of nanoparticles, as well as the distance between the nanoparticle surface and the enzyme-cutting site of particle-bound DNA. We found that the surface coverage of stabilizer is crucial for achieving high digestion efficiency. In addition, this stabilizer surface coverage can be tailored by varying the ion strength of the system. Based on the results of polyacrylamide gel electrophoresis and fluorescent study, a high digestion efficiency of 90+% for particle-bound DNA was achieved for the first time. This restriction enzyme manipulation can be considered as an additional level of control of the particle-bound DNA and is expected to be applied to manipulate more complicated nanostructures assembled by DNA.

Folate or folic acid has been employed as a targeting moiety of various anticancer agents to increase their cellular uptake within target cells since folate receptors are vastly overexpressed in several human tumors. In this study, a biodegradable polymer poly(d,l-lactide-co-glycolide)-poly(ethylene glycol)-folate (PLGA-PEG-FOL) was used to form micelles for encapsulating anticancer drug doxorubicin (DOX). The drug loading content, encapsulation efficiency and in vitro release were characterized. To evaluate the targeting ability of the folate conjugated micelles, the cytotoxicity and cellular uptake of DOX-loaded micelles on three cancer cell lines with different amount of folate receptors (KB, MATB III, C6) and normal fibroblast cells (CCL-110) were compared. The cytotoxicity of PLGA-PEG-FOL micelles to cancer cells was found to be much higher than that of normal fibroblast cells, demonstrating that the folate conjugated micelles has the ability to selectively target to cancer cells. For normal cells, the cellular uptake of PLGA-PEG-FOL micelles was similar to PLGA-PEG micelles without folate conjugation, and was substantially lower than that of cancer cells. In addition, the cell cycle analysis showed that the apoptotic percentage of normal fibroblasts was substantially lower compared with the cancer cells after exposing to DOX-loaded PLGA-PEG-FOL micelles. An optimal folate amount of approximately 40-65% on the micelles was found to be able to kill cancer cells but, at the same time, to have very low effect to normal cells.

... FJ Xu, SP Zhong, LYL Yung, ET Kang,* and KG Neoh. ... The measurements were carried out on a variable-angle spectroscopic ellipsometer (model VASE; JA Woollam Inc., Lincoln, NE) at incident angles of 70° and 75° in the wavelength range 200−1000 nm. ...

Self-assembling of metallic nanoparticles to form well-defined nanostructured structures is a field that has been receiving considerable research interest in recent years. In this field, DNA is a commonly used linker molecule to direct the assembly of the nanoscale building blocks because of its unique recognition capabilities, mechanical rigidity, and physicochemical stability. This study reported our novel approach to generate gold nanoparticle-DNA conjugates bearing specially designed DNA linker molecules that can be used as building blocks to construct nanoassemblies with precisely controlled structure or as nanoprobes for quantitative DNA sequence detection analysis. In our approach, gold nanoparticle-DNA conjugates bearing a specific number of long double-stranded DNA strands were prepared by gel electrophoresis. A restriction endonuclease enzyme was then used to manipulate the length of the nanoparticle-bound DNA. This enzymatic cleavage was confirmed by gel electrophoresis, and digestion efficiency of 90% or more was achieved. With this approach, nanoparticle conjugates bearing a specific number of strands of short DNA with less than 20-base can be achieved.

The identification of single nucleotide mutations with specific disease and single nucleotide polymorphisms (SNPs) among individuals is increasingly important for diagnosis of genetic disease, prediction of disease resistance or predispositions, as well as administration of drug dosages and design of personalized medicine. In this study, we demonstrated a convenient yet useful colorimetric quantitative DNA assay method with high single nucleotide discrimination for both center and end-mismatched sequences. The detection limit of our method is 75 fmol of DNA sample. Even for mixed DNA sample with low percentages of matched targets, this method shows good probe selectivity and zero false positive detection. Finally, the ease of operation and compatibility with existing molecular biology toolbox makes this method a potential low-cost alternative in scientific and clinical diagnostic application.

Polyurethanes have been synthesized using glycerophosphorylcholine (GPC) as a chain extender. By altering the ratio of GPC to butanediol (BD), a series of polymers was obtained composed of different contents of phosphorylcholine. Bulk and surface characterization of the polymers was carried out. Differential scanning calorimetry and dynamic mechanical analysis showed that the polymer with the highest phosphorylcholine content (PU-GPC-20) had the lowest soft segment Tg and the highest tensile strength and Young's modulus among the polymers studied. This is due to the high degree of microphase separation in PU-GPC-20 as a result of by ionic aggregation and hydrogen bonding from the zwitterionic phosphorylcholine moiety. PU-GPC-20 contained approximately 20 wt%, of glycerophosphorylcholine. Dynamic contact angle analysis showed that these polymers, especially the ones with high phosphorylcholine content, rearranged themselves to minimize their interfacial tension upon contacting an aqueous environment. Under shear rates of from 20 to 120 s(-1), neutrophils did not adhere to PU-GPC-20. Under similar conditions neutrophil adhesion was observed only at 20 s(-1) on PU-GPC-10, PU-GPC-5 and on the control polyurethane (PU-base). Cell spreading was observed on the control polyurethane but not on any of the other surfaces. The incorporation of phosphorylcholine into the polyurethane backbone effectively reduced neutrophil adhesion and thus potentially could result in lower inflammatory and foreign body responses.

Nanoparticles are increasingly being used for applications in clinical diagnostics due to their unique physical and chemical properties. Gold nanoparticles, in particular, have unique optical properties allowing simplicity of detection methods. In this study, an assay based on dimeric assembly of gold nanoparticles was developed for discriminating single nucleotide mismatches. Only gel electrophoresis is needed for assay readout. No other sophisticated or expensive equipment is required. In addition, no false-positive was observed in the readout. We used this assay for genotyping mutations in the Duchenne muscular dystrophy (DMD) gene, the largest known in the human genome. Our results show that conjugating the gold nanoparticles with short DNA probes of 18 bases and 70 bases complimentary to target sequences allows specific discrimination between wild-type and mutant sequences for c.4150G > T (NM.004006.1) mutation in exon 30 of the DMD gene using a simple colorimetric detection. This method allows identification of both the patients as well as the carriers of the mutation who are at risk of transmitting the disease.

The accurate assembly of nanoparticles into specially designed structures is important for the application of nanoparticle-based materials. Here we report the fabrication of well-defined nanoparticle assemblies via the grouping of gold nanoparticles bearing a specific number of short DNA per particle. Furthermore, we explored various conditions that affect the grouping. Our results show that direct linkage of two nanoparticle-bound DNA without the use of linker DNA yields 80% grouping, which is the highest of all conditions tested. Longer hybridization times and buffer conditions with higher ionic strength also increase grouping formation. These results provide key knowledge that controls the hybridization of nanoparticle-bound DNA for achieving well-defined nanoassemblies with high yield.

Here, a novel method of immobilizing proteins with well-defined orientation directly on liquid crystal surfaces that allow subsequent real-time imaging of specific protein–protein binding events on these surfaces is reported. Self-assembly of nitrilotriacetic acid terminated amphiphiles loaded with Ni2+ ions at aqueous-liquid crystal interface creates a surface capable of immobilizing histidine-tagged ubiquitin through complex formation between Ni2+ and histidine. When these surfaces containing immobilized histidine-tagged ubiquitin are exposed to anti-ubiquitin antibody, the spatial and temporal of specific protein–protein binding events trigger orientational transitions of liquid crystals. As a result, sharp liquid crystal optical switching from dark to bright can readily be observed under polarized lighting. The protein–protein binding can be observed within seconds and only requires nanogram quantities of proteins. This work demonstrates a simple strategy to immobilize proteins with well-defined orientation on liquid crystal surfaces for real-time and label-free detection of specific protein–protein binding events, which may find use in biomedical diagnostics.

Infection of implanted materials by bacteria constitutes one of the most serious complications following prosthetic and implant surgery. In the present study, a new strategy for confering stainless steel with antibacterial property via the alternate deposition of quaternized polyethylenimine (PEI) or quaternized polyethylenimine-silver complex and poly(acrylic acid) (PAA) was investigated. The success of the deposition of the polyelectrolyte multilayers (PEM) and its chemical nature was investigated by static water contact angle and X-ray photoelectron spectroscopy (XPS), respectively. The antibacterial activity was assessed using Escherichia coli (E. coli, a gram-negative bacterium) and Staphylococcus aureus (S. aureus, a gram-positive bacterium). The inhibition of E. coli and S aureus growth on the surface of functionalized films was clearly shown using the LIVE/DEAD Baclight bacterial viability kits and fluorescence microscopy. The cytotoxicity of the PEM to mammalian cells, evaluated by the MTT assay, was shown to be minimal and long-term antibacterial efficacy can be maintained. These results indicate new possibilities for the use of such easily built and functionalized architectures for the functionalization of surfaces of implanted medical devices. © 2005 Wiley Periodicals, Inc. J Biomed Mater Res, 2006