Variable-Rate Multimode Wideband: Difference between revisions
I don't know what this is about, but I wikified it a bit. |
m units |
||
| Line 1: | Line 1: | ||
'''VMR-WB''' is a source-controlled variable-rate multimode [[codec]] designed for robust encoding/decoding of wideband/narrowband speech. The operation of VMR-WB is controlled by speech signal characteristics (i.e., source-controlled) and by traffic condition of the network (i.e., network-controlled mode switching). Depending on the traffic conditions and the desired quality of service ([[QoS]]), one of the 4 operational modes is used. All operating modes of the existing VMR-WB standard are fully compliant with cdma2000® rate-set II. VMR-WB modes 0, 1, and 2 are cdma2000® native modes with mode 0 providing the highest quality and mode 2 the lowest ADR. VMR-WB mode 3 is the [[AMR-WB]] interoperable mode operating at an ADR slightly higher than mode 0 and providing a quality equal or better than that of AMR-WB at 12.65 |
'''VMR-WB''' is a source-controlled variable-rate multimode [[codec]] designed for robust encoding/decoding of wideband/narrowband speech. The operation of VMR-WB is controlled by speech signal characteristics (i.e., source-controlled) and by traffic condition of the network (i.e., network-controlled mode switching). Depending on the traffic conditions and the desired quality of service ([[QoS]]), one of the 4 operational modes is used. All operating modes of the existing VMR-WB standard are fully compliant with cdma2000® rate-set II. VMR-WB modes 0, 1, and 2 are cdma2000® native modes with mode 0 providing the highest quality and mode 2 the lowest ADR. VMR-WB mode 3 is the [[AMR-WB]] interoperable mode operating at an ADR slightly higher than mode 0 and providing a quality equal or better than that of AMR-WB at 12.65 kbit/s when in an interoperable interconnection with AMR-WB at 12.65 kbit/s. |
||
{{stub}} |
{{stub}} |
||
Revision as of 21:50, 3 December 2004
VMR-WB is a source-controlled variable-rate multimode codec designed for robust encoding/decoding of wideband/narrowband speech. The operation of VMR-WB is controlled by speech signal characteristics (i.e., source-controlled) and by traffic condition of the network (i.e., network-controlled mode switching). Depending on the traffic conditions and the desired quality of service (QoS), one of the 4 operational modes is used. All operating modes of the existing VMR-WB standard are fully compliant with cdma2000® rate-set II. VMR-WB modes 0, 1, and 2 are cdma2000® native modes with mode 0 providing the highest quality and mode 2 the lowest ADR. VMR-WB mode 3 is the AMR-WB interoperable mode operating at an ADR slightly higher than mode 0 and providing a quality equal or better than that of AMR-WB at 12.65 kbit/s when in an interoperable interconnection with AMR-WB at 12.65 kbit/s.