www.fgks.org   »   [go: up one dir, main page]

WHY WE PICKED IT

SCROLL TO SITE

SCROLL TO CURRENT LIST

Best Car Lifts For 2022

Contributor
Updated: Mar 16, 2021
Forbes Wheels independently tests and reviews cars and automotive accessories. We may earn an affiliate commission from links on our site. The analysis and opinions are our own.

Home garage mechanics, and those wanting storage for extra cars, should consider the benefits of portable and permanent home garage lifts. These units can ultimately pay for themselves through savings

...Read More
{{ isSummaryShown ? 'Hide Summary' : 'Show Summary' }}
Why we picked it

This mid-rise lift offers 39 inches of under-car working room, a 9,000-pound capacity, and the safety of full support panels on each side of the vehicle where rubber pads can be placed to match manufacturer lift points. It’s available with 110-volt or 220-volt power units. Built-in wheels allow for portability, and the power control unit has wheels to position the lift on either rear side.


Pros & Cons
Best for Quick Setup/Takedown
Why we picked it

This portable lifts raises 5,000 pounds yet weighs only about 100 pounds for each of the two ramps. Initial assembly takes less than an hour. Once assembled, setup/takedown takes just a few minutes. It’s powered by a hydraulic pump that uses inexpensive automatic transmission fluid and plugs in to standard 110-volt house power. Optional SUV & truck adapters offer six extra inches of lift height. Ramps are easy to move into place, and store vertically, saving garage space. The similarly priced QuickJack BL-7000SLX lifts 7,000 pounds.


Pros & Cons
Best for Big SUVs and Pickups
Why We Picked It

This four-post lift is suitable for stacking long and tall vehicles like the Chevy Suburban or Ford F-150. It features an 82-inch lift height, 190-inch length, and 112-inch width. It’s rated at 8,000 pounds capacity and is powered by a 1.5-horsepower/110-volt hydraulic power unit.


Pros & Cons


Bestseller No. 1
BIG RED T10152 Torin Steel Scissor Lift Jack Car Kit, 1.5 Ton (3,000 lb) Capacity, Red
  • Collapsible, steel scissor lift jack has a compact design that can be used as a rugged replacement jack or as an extra utility jack that can be stored in the trunk of your car
  • Features a lifting range of 4-1/8" to 15-1/8" with a 1.5 ton (3,000 lb) capacity
  • Engineered using a drop forged alloyed steel construction for quality and durability
Bestseller No. 2
Motorcycle Scissor Lift Jacks 1100lbs Load Capacity Wide Deck Transmission Jacks for Repairing Motorcycle Dirt Bikes ATVS UTVS ,Hoist Stands for Home Garage
1 Reviews
Motorcycle Scissor Lift Jacks 1100lbs Load Capacity Wide Deck Transmission Jacks for Repairing Motorcycle Dirt Bikes ATVS UTVS ,Hoist Stands for Home Garage
  • SOLID CONSTRUCTION - HABUTWAY motorcycle lift jack is made of solid steel which can carry almost all kinds of motorcycles, dirt bikes, ATVS, UTVS. And its red and black powder-coated finish gives our scissor lift a fashion look.
  • ADJUSTABLE HEIGHT - Motorcycle lift jacks can be adjusted to different heights with adjusting screws according to the your specific needs. And its minimum height is about 3.5” and its maximum height is about 14.5”.
  • HIGH-QUALITY APPEARANCE - Wide and flat table surface of the motorcycle stand lift is equipped with non-slip striped rubber, which can prevent wheels from sliding and scratching the solid steel surface during repair. The metal parts are sprayed with red and black painting to prevent oil, dust, rust and facilitate clean up.
SaleBestseller No. 3
Extreme Max 5001.5044 1000 lbs. Motorcycle Scissors Jack - Wide
1,711 Reviews
Extreme Max 5001.5044 1000 lbs. Motorcycle Scissors Jack - Wide
  • Extends up to a 14" height
  • Easily hand-operated using 7/8" socket or wrench (sold separately) - *Do not use an impact wrench or powered drill to operate the lift
  • Durable rubber padding on platform
Bestseller No. 4
Scissor Lift Jack Max 3 Ton Capacity with Jack Socket Drill Adapter, Lifting Jack Car Kit with Wrench/Lug Wrench for Car SUV MPV
15 Reviews
Scissor Lift Jack Max 3 Ton Capacity with Jack Socket Drill Adapter, Lifting Jack Car Kit with Wrench/Lug Wrench for Car SUV MPV
  • 【Come with 17mm Socket Drill Adapter】The 3 tons jack will come with a 17mm/0.67inch socket drill adapter, reduces time and effort to raise or lower your scissor jacks, only takes about 5 seconds.
  • 【Two way to handle】The scissor car lift jack comes with socket drill adapter and ratchet wrench to put the scissor jack up and down. It will help you lift your vehicle more quickly with 2 handle tools.
  • 【With Lug wrench】 The lift jack comes with 1 x telescoping lug wrench and 2xCR-V sockets(17/19mm,19/23mm) to loosen or tighten the lug nuts.Telescoping handle extends to 19 inches for maximum leverage.
Bestseller No. 5
Camco 48830 Eaz-Lift 24' RV Stabilizing Scissor Jack| Fits Pop-Up Campers and Travel Trailers | Supports Up to 7,500 lb.| 2-Pack
2,638 Reviews
Camco 48830 Eaz-Lift 24" RV Stabilizing Scissor Jack| Fits Pop-Up Campers and Travel Trailers | Supports Up to 7,500 lb.| 2-Pack
  • Effortlessly Stabilizes RVs: Scissor jacks have a certified 7500 lb. load capacity
  • Easy to Install: Allows either bolt-on or weld-on installation
  • Adjustable Height: Can be adjusted from 4-3/8-inches high to 23-3/4-inches
Bestseller No. 6
TENFUN Scissor Jack 1.5 Ton(3,307 lbs) Car Jack with The Saving Strength Ratcheting Handle
97 Reviews
TENFUN Scissor Jack 1.5 Ton(3,307 lbs) Car Jack with The Saving Strength Ratcheting Handle
  • This 2nd generation scissor jack works with a saving strength ratcheting handle to raise and lower, it is different from the old metal rod jacks.
  • Product parameters: A lifting range of 4-1/8" to 15-1/8" with a 1.5 ton (3,307 lb) capacity, it suits for most sedans.
  • Comparing with hydraulic jack, this portable car lift is really handy and it is light enough to leave in your trunk.
Bestseller No. 7
LEADBRAND Black Steel Scissor Jack, 2.5 tons (5,511lbs) Capacity, with Ratchet Handle, Oversized Base
282 Reviews
LEADBRAND Black Steel Scissor Jack, 2.5 tons (5,511lbs) Capacity, with Ratchet Handle, Oversized Base
  • ★Lift range from 3.85 inches to 17.4 inches; Capacity of 2.5 Tons (5,511 lbs)
  • ★Oversized base width for maximum support and stability
  • ★Heavy-duty steel frame and saddle
Bestseller No. 8
Orion Motor Tech Motorcycle Lift, 4-13 Inch Motorcycle Scissor Jack, 1100lb Capacity Wide Deck Motorcycle Center Stand and 1/2 Ton Scissor Lift Jack for Street Bikes Cruisers Touring Motorcycles More
2,017 Reviews
Orion Motor Tech Motorcycle Lift, 4-13 Inch Motorcycle Scissor Jack, 1100lb Capacity Wide Deck Motorcycle Center Stand and 1/2 Ton Scissor Lift Jack for Street Bikes Cruisers Touring Motorcycles More
  • REINFORCED LIFT CAPACITY:With a hefty lift capacity of 1100 lb and dynamic lift height range from 3 3/4" to 13 2/5", it can be used to lift street bikes, cruiser bikes, and adventure touring motorcycles. It will not fit snowmobiles, ATVs, UTVs, or dirt bikes.
  • DURABLE CONSTRUCTION: Heavy-duty steel body and steel sleeve with easy-adjusting lift height. The durable red coating is highly resistant to oil, grease, and dirt.
  • XL DECK: The extra-wide top platform of 9.8” x 15.8” provides a large contact area for better balance and support to your motorcycles, so you can find the bike’s center of gravity without the hassle.
Bestseller No. 9
CPROSP Scissor Jack 2 Tons(4,409 lbs) Capacity with Ratchet Handle Effort Saving
38 Reviews
CPROSP Scissor Jack 2 Tons(4,409 lbs) Capacity with Ratchet Handle Effort Saving
  • 🚗【Load capacity】: 4400 lbs (2000 kg / 2T)
  • 🚗【For】: Fits for smaller to medium vehicle, eg: pop-ups, trailers, campers motorhomes and rvs.
  • 🚗【Height】: Maximum height of 15.7”, Retracted height 4”, weld-on installation.
Bestseller No. 10
Wheelpal Scissor Jack Max 1.5 Tons(3,307 lbs) Capacity with Hand Crank Trolley Lifter with Ratchet for Car/SUV/MPV
35 Reviews
Wheelpal Scissor Jack Max 1.5 Tons(3,307 lbs) Capacity with Hand Crank Trolley Lifter with Ratchet for Car/SUV/MPV
  • Material: High Quality and Superior Steel.
  • Convenient: The solid base plate also ensures a secure footing, the product can be quite comfortable and easy, folded, carried in the vehicle.
  • Design: It adopt ratchet handle saving strength and stable design.


Methodology

Shop lifts for home garages raise a car off the ground two to eight feet, allowing for maintenance, repairs and detailing.

We evaluated a sampling of portable or scissors jacks that slide under the car and lift it off the ground enough to do work underneath, two-post lifts that raise the vehicle close to the ceiling and allow for standing work on tires and brakes, and four-post lifts meant to store one car safely over another or for repair work.

We examined the lift features including lifting height and weight, portability, safety features to protect the user and the vehicle when being raised, power requirements. We also compared and aggregated the findings of critics and lift users.

Our choices reflect different users’ needs for affordability versus lifting height and capacity, and access to tires, wheels and brakes for routine service, in some cases by adding a set of adapters to raise the wheels and tires off the ramps of four-post lifts. The lifts we evaluated covered a range of prices from about $2,000 to $4,500.


Are home car lifts safe?
Can you use the space under a two-post lift for additional storage?
What’s the difference between two-post and four-post lifts?
Are there portable two-post lifts?
Are there extra costs?

Brian Armstead has been involved in print, radio and television for over 46 years. He is President Emeritus of the Washington Automotive Press Association, is a North American Car, Truck and Utility of the Year (NACTOY) Juror, and is a regular contributor to several automotive media broadcasts and Web sites. In his spare time, Brian enjoys tending to the care and feeding of his Volvo, Mercedes-Benz and Land Rover vehicles.